aluminium sheet Tenders in Rajasthan

4
Directorate of Local Bodies - Rajasthan

37147684 gantry board ( neemkathana road and shrimadhopur road ) for high intensity retro reflective type iv sign plate with thick aluminium sheet supply work....

Due Date : April 13, 2023

Tender Value : ₹ 6.50 Lakhs

View Tender
6
Department Of Technical Education - Rajasthan

36884198 supply raw material for different trades m.s. flat, miled steel flat, m.s. pipe, m.s. square pipe, m.s. rod round, s.s. filter rod, m.s. electrode, emery paper, sutter blade, s.s. sheet, aluminum sheet, drill bit, drill bit paralal sank, file handle, drill chuk with ki orber mt 2, drill bit, movile oil, leather apron, hexa frame, aluminum rod....

Due Date : March 27, 2023

Tender Value : ₹ 1.98 Lakhs

View Tender
7
Pradhan Mantri Gram Sadak Yojana - Rajasthan

36595163 tender for construction & maintenance pkg. no. rj06p316 t 13 bachhamadi to nh 21 via nagla bartai march, 2023 2 construction of reference bench mark ( 1 no. ) , working bench mark ( 4 nos. ) and near all drainage structures and bridges ( as per direction of engineer in charge ) , reference pillar / burgees @ 50m interval on both side of formation width including marking of centre line, setting out curves, recording of levels, white washing and lettering etc. complete as per mord specifications cl. 108. 3 clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlierand disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per mord specification clause 201.by mechanical means in area of non thorny jungle 4 scarifying old bituminous road by making 50x50mm furrows criss cross at 1.0 metre intervals at 45 degree to the center line of the carriageway 5 excavation for roadwork in soil with hydraulic excavator of0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location with a lift upto 1.5 m and lead upto 1000 m as per mord specification clause 302.3 6 construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of tables 300.1 and 300.2 with a lead upto 50 m as per mord specification clause 301.5 7 construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per mord specification clause 303.1. 8 construction of granular sub base by providing well graded material, mixing in a mechanical mix plant at omc , carriage of mixed material to work site upto lead of 1000m spreading in uniform layers with tractor mount grader on prepared surface, mixing by mix in place method with rotavatorat omc, and compacting with smoothwheelroller to achieve thedesired density, complete as per mord specification clause 401. for grading i material 9 providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing thematerial with water at omc in mechanical mixer ( pug mill ) , carriage of mixed material by tipper to site, layingin uniform layers in sub base / base course on a well prepared sub base and compacting with smoothwheel roller of 80 to 100kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400.11 & 400.12 and mord specification clause 406. extra rate for carriage of mixed material additional lead of 20 km from in item 4.9 10 providing and applying primer coat with bitumen emulsion ( ss 1 ) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 1.0 kg / sqm using mechanical means as per mord specification clause 502. low porosity 11 providing and applying tack coat with bitumen emulsion ( rs 1 ) using emulsiondistributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per mord specification clause 503. 12 providing and laying bituminous macadam with hot mix plant using crushed aggregates ofgrading as per table 500.4 premixed with bituminous binder, transported to site with all leads laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolledto achieve the desired compaction as per mord specification clause 504.bitumen ( vg 30 ) 13 providing, laying and rolling of open graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing of aggregate and plastic waste cutting in a hotmix plant, laying and rolling with a three wheel 80 100 kn static roller capacity, finished to required level and grades to be followed by seal coat of either type a or type b or type c as per mord specification clause 508. waste plastic @ 8% of bitumen. case ii by mechnical meansbitumen vg 30 14 providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using type a, type b and type c as per mord specification clause 510 by mechanical means case ii:type b bitumen ( vg 30 ) 15 supply & planting of shady plants ( neem, peepal, goolar, jamun, imli or other specified ) along road side including the following activities: 1. preparation of soil including cleaning & removing of unwanted shrubs removal of stones & garbage. 2. supply of plant at site of two years of age & height more than 1.50 mtr 3. supply of dry manure ( farm yard manure organic ) 4. supply of insecticides 5. digging of pits size 60x60x60 cms. including removal of stones. manuring application of insecticides & watering at least 15 liter per plant after planting. 6. half brick circular tree guard in second class bricks, internal dia 1.25 meter and height 1.20 meter above ground and 0.20 meter below ground, bottom two courses laid dry and top three courses in cement mortar 1:6 ( 1cement : 6 sand ) and the intermediate courses being in dry honey comb masonry, as per design complete. 16 construction of foundation / inaugration pedastal in 23 cm thick brick masonry in cm 1:4 of size 1.20m x 1.80m above ground level with adequate foundation including providing and fixing of granite stone of size 0.75m x0.60m with engraving letters and figures, cement plaster, white washing etc. complete as per direction of engineer in charge. 17 providing and fixing of retro reflectorised cautionary, mandatory and informatory sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as perdrawings and mord specification clause 801 18 900 mm equilateral & triangle 19 600 mm circular 20 800 mm x 600 mm rectangular 21 providing and fixing of typical pmgsy informatory sign board with logo as per mord specifications and drawing. three ms plates of 1.6 mm thick, top and middle plate duly welded with ms flat iron 25mm x 5m size on back on edges.the lower plate will be welded with ms angle iron frame of 25mm x 25mm x 5mm. the angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 swg sheet tubes posts duly embedded in cement concrete m 15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level.the top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 swg steel plate tube.all m.s. will be stove enameled on both sides.lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour.all sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing clause 1701 and annexure 1700.1 22 providing and fixing of pmgsy logo with definition plate ( as per mord design / drawing ) 2mm thick ms plate framed to angle iron 40x40x6mmincluding orange luminous colour paint on logo, size of diamand plate 600x600mm definition plate 900x250mm supported on ms post of angle iron of size 65x65x6mm, 3m long stove enameled paint with hold fastfirmly fixed to the ground by means of properly designed foundation with m 15 grade cement concrete 450 x 450 x 600 mm, 600 mm below ground level as per approved drawing and mord specification clause 1700 23 providing and erecting direction and place identification retro reflectorised sign asper irc:67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3, fixed over aluminium sheeting, 2 mm thickwith areaexceeding 0.9 sqm supported on mild steel angle iron posts 75 mm x 75 mm x 6 mm, 2 nos.firmly fixed to the ground by means of properly designed foundation with m 15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per approved drawing and mord specification clause 1701 24 providing and erecting typical citizens information board as per approved drawing & specification of mord made of two ms sheet of 1.6 mm thick each of size 900mm x 750mm stiffend by angle iron 25mmx25mm x 3mm all around the plate & plates fixed on frame of 75mm dia pipe of 12 swg sheet ( vertical post 3050 mm with angle holdfasts and horizontal member 900mm ) to be joined by embedded in cement concrete m 15 grade of block of 600mmx 600mm x 750 mm size below ground level as per enclosed drawings & as directed by engineering incharge. all ms will be stove anmeled on both side lettering. figuring and border will be with ready mixed synthethic enamel paint of superior quality in required shade and colour etc complete in all respect. all sections of framed post and steel tube will be painted with primer and two coat of epoxy paint as per drawing and as per mord specification. 25 reinforced cement concrete m15grade kilometre stone / local stone of standard design as per irc:8 fixing in position including painting and printing, etc as per drawing and mord specification clause 1703 26 ( a ) 5th kilometre stone ( precast ) 27 ( b ) ordinary kilometer stone ( precast ) 28 ( c ) 200 m stone ( precast ) 29 cut stone boundary pillars / local stone of standard design as per irc:25, fixed in position including finishing and lettering but excluding painting as per drawing and technical specification clause 1704 30 providing and laying rounded hump type speed breakers for crossing speed 25 km / h as per irc design including providing and applying bitumen emulsion tack coat, making speed breaker in designed profile with bituminous macadam, providing seal coat type b for sealing the voids and marking chequered pattern with thermoplastic paint complete as perirc : 99 1988 31 marking centre line and stop lines etc. on road as per irc pattern with thermoplastic paint of approved quality and make without glass beads laid on the road surface at temperature 160 c with a special applicator machine complete with a special applicator machine complete with labour material and traffic diversion arrangements. 32 providing and erecting typical maintenance information board as per approved drawing & specification of mord made of ms sheet of 1.6 mm thick of size 900mm x 1500mm stiffend by angle iron 25mmx25mm x 3mm all around the plate & plates fixed on frame of 75mm dia pipe of 12 swg sheet ( vertical post 3050 mm with angle holdfasts and horizontal member 900mm ) to be joined by embedded in cement concrete m 15 grade of block of 600mmx 600mm x 750 mm size below ground level as per enclosed drawings & as directed by engineering incharge. all ms will be stove anmeled on both side lettering. figuring and border will be with ready mixed synthethic enamel paint of superior quality in required shade and colour etc complete in all respect. all sections of framed post and steel tube will be painted with primer and two coat of epoxy paint as per drawing and as per mord specification. 33 providing and fixing of road stud 100 x 100 mm die cast in aluminium, resistant to corrosive effect of salt and grit, fitted with lense reflectors, installed in concrete or asphaltic surface by drilling holes 30 mm upto a depth of 600 mm and bedded in a suitable bituminous grout or epoxy mortar, all as per bs:873 ( part 4 ) 1973. 34 supply & fixing of mandatory / regulatory reflective sign board fixed on 3 meter long angle iron of size 65x65x6 mm complete as per irc 67 1977 made of 2 mm thick m.s. sheet stove enamelled paint and reflective symbol. 35 stop signs with definition plate size 30x20 cm 90 cm octagon 36 60 cm octagon 37 supply of caution diversion sign board size 1800 x 600 mm having centre height of 75 cm made out or 1.25 mm thick m.s. sheet duly framed with angle iron size 40 x 40 x 5 mm fixed on two moving wheels and stands, made out of 75 x 40 mm channel having two solid rubber wheels mounted on ball bearings, boards is processed in stoving enamel blue and machine cut sheet reflective letter and arrow on one side and the other side having arrow only complete in all respect. 38 supplying & fixing route marker reflective sign boards consisting of shield marked on m.s. flat 14 gauge of size 40 x 60 cm and definition plate of 30 x 25 cm, 14 gauge, fixed on mild steel posts of t iron or angle iron for nh / sh : 39 supplying of men at work sign board ( folding type ) made of 1.25 mm thick m.s. sheet size 900x900x900 mm painted in white stove enamelled paint and reflective machine cut sheet men’s emblem and letter men at work in red colours and additional attachment of size 150x900 mm plate for gang number and name with white stoving enameled back ground both plates are fixed on a folding stand of m.s. ( heavy ) steel tube of size 13.2 mm outer dia as per is 1239 ( part i ) 1979 duly painted in grey colour and both the plates are painted on back side in grey enamel paint. 40 p & f delinator with 30 cm. outer dia rcc hume pipe np 2 ( as per is 458 / 1971 ) pipe 1. om. long 40 cm embedded in cement concrete ( 1:4:8 ) block of size 50x50x40 cm. including excavation upto 40 cm depth. the inside of pipe shall be filled with c.c. ( 1:4:8 ) stone grit max size 20 mm or less upto the top with semi circular humping. the pipes shall be painted white / black with enamel paint with red dots two nos. on each side 41 supplying of cat’s eye made of aluminium alloy size 75x100x22 mm having 21 biconvex lenses embedded in circular disk of abs plastic on each side. 42 providing and erecting a thrie metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 85 cm above road / ground level, fixed on ismc series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 2 m high with 1.15 m below ground level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to is:1367 and is:1364, metal beam rail to be fixed on the vertical post with a space of channel section 150 x 75 x 5 mm, 546 mm long complete as per clause 810 43 supply of chevron sign of size 75x60 cm made out of aluminum sheet 2 mm thick with fixing provision on m.s. angle iron post 50x50x6 mm 3 m long screwed with stainless steel nut bolts of 8 m dia, plate is covered by high intensity grade yellow retro reflective sheeting and black screen printed arrow on retro reflective sheet, complete in all respect. comp. in all respect duly post painted in alternate band of black / white synthetic enamel paint & hold fast at bottom 44 earthwork in excavation for structures as per drawing and mord specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitablematerial.ordinary soil upto 3 m depth 45 providing concrete for plain / reinforced concrete in open foundations complete as per drawings and mord specifications clause 802, 803, 1202 & 1203 p.c.c grade m 10 nominal mix 1:3:6 46 stone masonry in cement mortar for substructure complete as per drawing & mord specification clauses 702, 704, 1202 and 1204 random rubble masonry in 1:6 cement mortar 47 providing pcc m 20 architectural coping on the top of wing wall, return wall etc. complete as per drawing and mord specification clauses 615, 710and 1204.3.11 75 mm thick 48 pointing with cement mortar ( 1:3 ) on stone work as per drawing and mord specification clauses 613.3 and 1204 flush and rulled type 49 construction of dry lean cement concrete sub base over a prepared sub grade with coarse and fine aggregate conforming to is: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600 1, cement content not to be less than 150 kg / cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8 10 tonnes vibratory roller, finishing and curing. 50 construction of plastic cell filled cement concrete pavement, with m30 grade concrete, thickness as per design, over a prepared sub base, with 53 grade ordinary portland cement ( opc ) or any other type as per clause 1501.2.4 m30 ( grade ) .coarse and fine aggregates conforming to is : 2386, maximum in a concrete mixer of not less then 0.2 cum capacity and appropriate weigh batcher using approved mix design ( as per irc 44 2088, laid in approved fixed side formwork ( steel channel, wedges, steel plates including levelling the formwork as per drawing ) , spreading the concrete with shovels, rakes, compacted using screed and plate vibrators and finished in continuous operation, concrete should have a slump of 30 50mm with use of approved plasticizer if required formwork of plastic cells should be made of high density polyethylene ( hdpe ) , sheets having thickness ranging from 0.19 0.22mm with sides 150mmx150mm and height as fixed by engineer in charge. to be laid in full width of the carriageway. iron spikes of about 200mm long are to be used to keep the cell walls taut. nylon thread or rope may be used to preventcollapse of cells during placement of concrete. iron spikes to be taken out for use in other place as soon as the concrete is in place. curing of concrete slabs for 14 days, curing compound ( where specified ) and water finishing to lines and grade as per drawing and mord specification of cell filled concrete pavement.150mm thickness 51 providing and laying reinforced cement concrete pipe np3 for culverts on first class bedding of granularmaterial in single row includingfixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets clause 1106.np3 pipes 300 mm dia 52 routine maintenance work after completiion of works for five years fixed amount....

Due Date : March 13, 2023

Tender Value : ₹ 5.02 Crore

View Tender
9
Indian Institute Of Management - Rajasthan

36362744 supply, installation, testing, and commissioning of 5100 cfm ceiling suspended ahu along with all accessories for 330 seater auditorium room at iim udaipur. supply, installation, testing and commissioning of factory built 5100 cfm ceiling suspended chilled water double skin type horizontal / vertical air handling units made of 25mm thick panels consisting of pre plasticized g.i. casing of thickness 0.8mm outside layer and 0.8 mm inside layer with polyurethane foam ( puf ) insulation factory injected between them by injection moulding machine, complete with blower section with blower suitable for static pressure as required, minimum 2 bend gss / pvc eliminators, cooling coil section with aluminium finned copper tubes ( tubes thickness not less than 0.5mm ) cooling coil of 6 row deep, filter section with 50mm thick metal viscous / washable synthetic type air prefilters, direct driven ec fan & motor motor of efficiency class ie3 suitable for 415 ± 10% volts, 50hz, 3 phase ac supply suitably designed for variable frequency drive applications, drain connections, stainless steel ( 18g ) drain pan with puf insulation, 150 mm dia. dial type pressure gauges ( 2 nos. ) and industrial type thermometers ( 2 nos. ) at the inlet and outlet of coil, auto purge valve wherever required, necessary vibration isolation arrangement including door limit switch etc. complete as per specification and of following capacities. 2 laying / fixing, testing, and commissioning of 50 mm dia ms pipes of chilled water piping inside the building ( with necessary clamps, vibration isolators, and fittings but excluding valves, strainers, gauges etc. ) duly insulated with following closed cell elastometric nitrile rubber of minimum 45 kg / cu m density, thermal conductivity 0.037 w / mk or better at 20 deg mean temperature class ‘o’ insulation applied by suitable rubber based adhesive complete including repairing of damage to building etc. as per specifications and as required complete in all respect. ( 50 mm dia pipe and 32 mm thick insulation will be issued by iim udaipur ) 3 supplying and fixing of 32 mm dia upvc drain pipe along withaccessories in from ahu drain pans to nearestfloor drain complete with interconnection, flanges, elbows, tees, nuts, p trap etc. as per specifications. 4 supplying, fixing, testing and commissioning of 50 mm dia butterflyvalve ( manual ) withc i bodyss disc, nitrile rubber seal & o ring pn 16 pressure rating for chilled water / hot eater circulation as specified in the chilled water plumbing duly insulated to the same specifications as the connected piping and adequately supported as per specifications. 5 supplying, fixing, testing and commissioning of 50 mm dia y strainer of ductile ci body flanged ends with stainless steel strainer forchilled / hotwater circulation including insulation as specified. in the chilled water plumbing duly insulated to the same specifications as the connected piping and adequately supported as per specifications. 6 supply, installation, balancing and commissioning of site fabricated 0.63 mm thickness sheet ( 24g ) gss sheet metal rectangular / roundducting complete with neoprenerubbergaskets, elbows, splitterdampers, vanes, hangers, supportsetc.asperapproveddrawingsand specifications of following sheet thickness complete as required 7 supply, installation, balancing and commissioning ofsite fabricated 0.8 mm thicknesssheet ( 22g ) gss sheet metal rectangular / roundducting complete with neoprenerubbergaskets, elbows, splitterdampers, vanes, hangers, supportsetc.asperapproveddrawingsand specifications of following sheet thickness complete as required 8 providing and fixing of canvas cloth with complete gi sheet casing complete as required for connecting the ahu with the ducting / pelenium as required. 9 fixingofpowdercoated extruded aluminium supply / returnairgrillswith volumecontrol dampers complete as required. ( grills will be provided by iim udaipur ) 10 supply and fixing of19 mm thickness duly laminated aluminumfoilofmatfinishclosedcellnitrilerubber ( class o ) insulation on existing duct after applying suitable adhesive for nitrile rubber. the joints shall be sealed with 50 mm wide and3mmthickselfadhesivenitrilerubbertapeinsulation complete as per specifications and as required. 11 supplyandfixingofacousticliningofsupplyairductand plenumwith25mmthickresinbondedglasswoolhaving density of 32 kg / m³, with 25 mm x 25 mm gi section of 1.25 mm thick, at 600 mm centre to centre covered with reinforced plastic tissue paper and 0.5 mm thick perforated aluminum sheet fixed to inside surface of ducts with cadmium plated nuts, bolts, stick pins, cprx compound etc. complete as required and as per specifications. 12 supplying, fixing acoustic lining on wall and ceiling of ahu rooms with 50mm thick, density 32 kg / cu.m resin bonded glass fiber insulation friction fixed in 610mm x 610 mm frame work made of 25x50x50x50x25 mm made out of 0.6mm thick gi sheet u shaped channel and covered with reinforced fiber glass tissue and finished with 0.80 mm perforated aluminium sheet etc. complete as required and as per specifications 13 supplying and drawing of 5 x 4 sq mm size of frls pvc insulated copper conductor, single core cable in the existing surface / recessed steel / pvc conduit as required....

Due Date : March 09, 2023

Tender Value : ₹ 4.40 Lakhs

View Tender
10
Indian Army - Rajasthan

36200386 bids are invited for aluminium sheet with glass and fitting , aluminium door size 7 feetx 3.5 feet mse total quantity : 681...

Due Date : February 21, 2023

Tender Value : ₹ 2 Lakhs

View Tender
11
Military Engineer Services - Rajasthan

35811567 tender for repair maintenance of stps of age e / m under jaipur mil stn cleaning of treated water undergroud water storage sump of capacity 50, 000 gln at stp 1, 2, 3, 4 & 5 by specialized water tank clean tank cleanprocess as under : note 1 : all workers will wear mask and carry all necessary t&p for protection and smooth working before start cleaning process. the contractor will take prior permission from engineer in charge in written before starting work and will brief all aspect i.e date and time of cleaning start and completion so that suitable arrangment may be made to supply water during cleaning process. contractor will depute manpower in such manner that water supply time do not hamper. ( a ) mechanized dewatering and scrubbing the surface of floor and wall till removal of dirt, sendiments, fungus and the stains and cleaning, removal of sludge and shifting as directed. ( b ) high pressure cleaning. ( c ) soak the dirt and sendiments by vacuum cleaning. ( d ) anti bacterial spray on all dimensions inside tank. ( e ) m&l for marking date of cleaning on tank by using synthetic enemal paint, font design and letter size will be as directed by engineer in charge. ( 2 ) sludge / dirt and other sand debries etc will thrown out to place as directed by engineer in charge. ( 3 ) each stp shall be measured and paid as one job, if contractor failed / delayed after intimation for cleaning of each plant, penalty @ 20000 / shall be recoverd from his dues and contractors claim on this account shall not be entertained. 2 removing silt ( mud ) from sewage pump wellat stp 1, 2, 4&5 ( depth 7.5 meter, dia 8.5 meter ) and cleaning the bottom portion and sides of pump well by using man power at equal intervel of 6 months from date of commencement of contract, proper cleaning of sewage tank by following method complete all as mentioned in item no 3. 3 removing silt ( mud ) from sewage pump wellat stp 3 queens road ( size depth 7.5 meter, dia 3.5 meter covered with rcc roof and wall ) and cleaning the bottom portion and sides of pump well by using man power at equal intervel of 6 months from date of commencement of contract, proper cleaning of sewage tank by following method complete all as mentioned below: note for item no 2 and 3 : ( a ) all workers should be experienced for sewage pump well cleaning and necessary safety equipments including mask and other t&p for workers should be arranged by contractor before start cleaning process. ( b ) the contractor will take prior permission from engineer in charge in written before starting work and will brief all aspect i.e. date and time of cleaning start and completion so that suitable arrangement may be made. contractor will supply t&p and manpower in such manner that cleaning should be done without hampering sewage system.note ( 1 ) sludge / dirt and other sand debries etc will thrown out to place as directed by engineer in charge. ( 2 ) if contractor failed / delayed after intimation for cleaning of each plant, penalty@ rs 30000 / shall be recoverd from his dues and contractor s claim on this account shall not be entertained. 4 proper cleaning of rcc stilling chamber, rcc fine bar screen i&ii, rcc grit chamber i&ii, rcc oil and grease chamber, equalization tank, mbbr tank i&ii, flocculator, tube settler, cct, rcc filter feed tank, rcc slurry / sludge sump by experienced workers with safety equipments and t&p items required for cleaning of all above said parts of sewage treatment plant of 05 nos at equal intervel of 01month from date of commencement of contract complete all as mentioned below: ( a ) by mechanised dewatering and scrubbing the surface of floor, wall till removal of dirt, sediments and cleaning sludge removal and shifting as directed. ( b ) the contractor will take prior permission from engineer in charge in written before starting work and will brief all aspect i.e. date and time of cleaning start and completion so that suitable arrangement may be made. contractor will supply t&p and manpower in such manner that cleaning should be done without hamper sewage system.note ( 1 ) sludge / dirt and other sand debries etc will thrown out to place as directed by engineer in charge. ( 2 ) if contractor failed / delayed after intimation for cleaning of each plant, penalty @ rs 35000 / shall be recoverd from his dues and contractor s claim on this account shall not be entertained. 5 m&l for rectification of leakage from 50mm hdpe bore pipe line by cutting & replacement of defective hdpe pipe and refixing the same after cleaning and by connecting with old line with and including necessary fittings hdpe welding ( hot plate welding ) for old & new pipe includingnecessary exacavation & earth work as required complete all as specfied and directed . 6 all as per item no. 05 but for 100mm hdpe bore pipe 7 all as per item no. 05 but for 150mm hdpe bore pipe 8 all as per item no. 05 but for 250mm hdpe bore pipe 9 dismentling of centrifugal / monoblock pump set after disconnecting from power mains & pipe line of capacity 5 hp, 3 phase, 415 volts 50 hz, acof make kirloskar fromfoundation and dismantlingfor overhauling repairincludingreplacementof unservicablepart oiling , greasing, reinstalling and connecting with suction / dischargeline with correctalignment by replacing glandstuds and making completeelectricconnection includingtesting complete all as specifiedand directed. ( note spare parts required for replacement shall be measured and paid separetaly under respective items ) 10 transportation of motor to contractors work shop and back to site after repair, cutting of burnt winding & rewinding the stator with super enamelled copper wire of suitable size and class of insulation including insulation paper, sleeves, thimbles ete as per relevent is standard / manufacturers recommendation as directed by eic. 11 supply only stainless steel pump shaft as per existing make. 12 supply only gun metal impeller with neck key, distance bush as per existing make. 13 supply only ball bearing as per existing number and as per existing make. 14 m&l for dismantling the non clogging sewagepump ( 5.0 to 7.5 hp ) from foundation including electric and mechanical connection and taking out from 10 mtr deep sewage well with chain pulley block and instalation, reconnecting the electric and mechanical connection at existing location after carrying out minor repairs including replacement oil seal, oil, hanging chain etc all as specified and directed by engineer in charge. make :crompton greaves ltd, ksb ( note spare parts required for replacement shall be measured and paid separetalyrespective items. 15 transportation of motor to workshop and back to site after repair, cutting of burnt winding & rewinding the stator with super enamelled copper wire of suitable size and class of insulation including insulation paper, sleeves, thimbles ete as per relevent is standard / manufacturers recommendation as directed by eic. 16 supply only ball bearing nde and de as per existing numbers. make nde / de or equivalent as approved by ge. 17 all as per item no. 10 above but non clogging sewage pump ofcapacity 12.5 hp 18 transportation of motor to workshop and back to site after repair, cutting of burnt winding & rewinding the stator with super enamelled copper wire of suitable size and class of insulation including insulation paper, sleeves, thimbles ete as per relevent is standard / manufacturers recommendation as directed by eic. 19 supply only ball bearing nde and de as per existing numbers. 20 all as per item no. 10 above but non clogging sewage pump ofcapacity 3 / 4 hp 21 transportation of motor to workshop and back to site after repair, cutting of burnt winding & rewinding the stator with super enamelled copper wire of suitable size and class of insulation including insulation paper, sleeves, thimbles ete as per relevent is standard / manufacturers recommendation as directed by eic. 22 supply only ball bearing nde and de as per existing numbers. make nde / de or equivalent as approved by ge. 23 dismentling of centrifugal / monoblock pump set after disconnecting from power mains & pipe line of capacity 7.5 to 15 hp, 3 phase, 415 volts 50 hz, acof make kirloskar fromfoundation and dismantlingfor overhauling repairincludingreplacementof unservicablepart oiling , greasing, reinstalling and connecting with suction / dischargeline with correctalignment by replacing glandstuds and making completeelectricconnection includingtesting complete all as specifiedand directed. ( note spare parts required for replacement shall be measured and paid separetalyas supply only under respective item ) 24 transportation of motor to workshop and back to site after repair, cutting of burnt winding & rewinding the stator with super enamelled copper wire of suitable size and class of insulation including insulation paper, sleeves, thimbles ete as per relevent is standard / manufacturers recommendation as directed by eic. 25 supply only stainless steel pump shaft 26 supply only gun metal impeller with neck key, distance bush 27 supply only ball bearing as per existing number. 28 all as per item no. 13 above but centrifugal / monoblock pump ofcapacity 25 hp 29 transportation of motor to workshop and back to site after repair, cutting of burnt winding & rewinding the stator with super enamelled copper wire of suitable size and class of insulation including insulation paper, sleeves, thimbles ete as per relevent is standard / manufacturers recommendation as directed by eic. 30 supply only stainless steel pump shaft 31 supply only gun metal impeller with neck key, distance bush 32 supply only ball bearing as per existing number. 33 dismentling of filter press pump set, gear boxmotor after disconnecting from power mains & pipe line of capacity 1.5 hp to 2 hp , 3 phase, 415 volts 50 hz, acfromfoundation and dismantlingfor overhauling repairincludingreplacementof unservicablepart oiling , greasing, reinstalling and connecting with suction / dischargeline with correctalignment by replacing of gear road / pin and making completeelectricconnection includingtesting complete all as specifiedand directed. ( note spare parts required for replacement shall be measured and paid separetalyas supply only under respective items ) 34 transportation of motor to workshop and back to site after repair, cutting of burnt winding & rewinding the stator with super enamelled copper wire of suitable size and class of insulation including insulation paper, sleeves, thimbles ete as per relevent is standard / manufacturers recommendation as directed by eic. 35 supply only set of gear box as per existing model. 36 supply onlyneck key, distance bush 37 supply only ball bearing as per existing number. 38 supply only fan belt as per existing number. 39 m&l for taking out & servicing of existing air blower ( make everest, ) of capacity488 cum / hr from authorised service centre of everest company with taking out of electric cable complete and reconnecting the electric and mechanical connection at existing location after carrying out minor repairs including replacement of oil seal, oil, locking arrangement of pully, belt, gland packing etc all as specified and directed by engineer in charge. ( note spare parts required for replacement shall be measured and paid separetaly as supply only under respective items ) 40 supply only air filter suitable for above modelstainless steel pump shaft 41 supply only ball bearing ( make skf or equivalent as approved by ge ) 42 supply only set of rotor with hub as per existing model. 43 supply only set of gear with hub as per existing model. 44 taking out & rewinding the existing burnt blowermotor 20 hp, 3phase, 50 cycles by disconnecting electrically and mechanically and transporting to the locally contractors workshop. dismantlingthemotor and removing the old burnt copper winding & demoisturise, cleaning, rewindingthecoilswith same gauge super enamelled copper wire, with suitable f class paper insulation, varnishing, andreassembling by replacing bearings, remetalling of armature shaft and turning on lathe to give proper size for bearing fittings, replacement of terminal plate and reinstalling at the installation andtesting, commissioning etc complete.note before rewinding the existing motor, contractor must show the burnt motor / winding to the eic. old unserviceable copper retrieved will be property of contractor 45 supply & fix in repair pvc insulated, pvc sheathed, submersible flat cable isi marked with multi stranded copper conductor 1100 volt grade of size 6 sqmm 3 core of with pvc conduit of size 25mm dia for connecting pump from panel including heavy duty pvc conduit as per ground requirement complete all as specified and directed. 46 supply & fix in repair 3 pole power contactor type mnx 9 of ac3 9amp, 415v, 50 hz complete all as specified and directed. 47 supply & fix in repair contactor type mnx 32 of ac3 32amp, 415v, 50 hz complete all as specified and directed. 48 supply & fix in repair front mounting add on aux contact block mnx a2, 1no+1nc, 415v, 50 hz of make l&t, c&s, schneider or equivelent as approved by ge 49 supply & fix in repair control relay ( auxiliary contactors ) type mx0 22e ( 2no + 2nc ) , 415v of make l&t, abb, ae, or equivelent as approved by ge 50 supply & fix in repair mcb tp, c curve of capacity 6 amp to 32 amp 415v complete all as specified and directed. 51 supply & fix in repair mcb tpn, c curve of capacity 40 amp to 63 amp 415v complete all as specified and directed. 52 m & l for testing of treated water ( stp 1, 2, 3, 4&5 ) from regional govt approved test lab or nabl accredited lab. the undermentioned test should be carried out by each treated water sample and their characteristics will be as under: ( i ) biochemical oxygen demand ( bod ) < 10 mg / litre ( ii ) chemical oxygen demand ( cod ) < 150 mg / litre ( iii ) total suspended solids ( tss ) < 10 mg / litre ( iv ) dissolved oxygen ( do ) > 5 mg / litre ( v ) ph should be 6.5 to 8.5 ( vi ) residual chlorine > 0.5 mg / litre or more ( vii ) outlet coliform < 100 counts / 100ml note : ( i ) the frequency of all test should be once in a month at equal interval. ( ii ) ph and residual chlorine shall be tested on daily basis in the presence of je e / m / age e / m. ph meter and chlorine testing kit shall be provided by the contractor and cost of which shall be deemed to be included in the quoted rates. 53 m&l for rectification of leakage ( priming system ) from gi 15 / 20 mm size bore pipe line by cutting defective gi pipe by connecting with old line with and including necessary fittings such as socket & union, nipple, gate valveincluding screwingold & new pipe including all necessary earth work for connecting complete all as specified and directed. 54 s&f in repair of old u / sgland packing of valves / pump set of any sizes / capacity complete with neoprene rubber gasket , jointing material and nuts / bolts / washer of suitable size complete all as specified and directed. 55 s&f in repair ci foot valve isi marked with all fittings of size 100 mm dia 56 m & l for plaincement concrete 1:3:6 type c 1 ( 20mm graded aggregate ) in foundation filling mass concreting etc for making good the disturbed portion of road / floor / platform including form work etc complete all as specified and directed. 57 s&f in repairs electro magnetic diaphragm pump model v 12 having a capacity of 6.0 lph at maximum injection pressure of 3.5 kg / cm2 complete with pp head, fittings, footvalve, antisyphon valve and suitable to operate on 230 v / single phase / 50 hz ac supply including connecting to pipe line including testing complete as directed by eic. 58 servicing / overhauling ofsludge cake machinemake sachinfiltech pvt ltdafter disconnecting frompipe by authorised manufacturecompany, opening andchecking of various components andproper cleaning and greasing / oilingincd if any spare parts requiredfor repair and fuctioning of machine inclreplace compnay approved cloth as required each machine and pvc handle, knob, gear etcshall be deemed to be included in quoted rate of this item and testing of machine after repair complete and making sluge brick / rollall as directed by engr in charge. 59 labour only for checking the serviceability of different spares / component / parts of the starter and motor pump set / panel of any capacity at any site complete all as directed by engr in charge 60 supply and fix in repair of fullyautomatic star delta starter 10 hpcomprising of combo volt andammeter single phase preventor, over load relayand timer housed in ms sheet power coated enclosure of 10 hp capacity complete all as specified and directed. 61 supply and fix in repair ofstarter 5 hp comprising of combo volt andammeter, over load relayin ms sheet power coated enclosure complete all as specified and directed. 62 providing daily area cleaning / sweeping of preimises of following stp including cutting outgreen vegetation, roots, bushes, treebranches, picking polythene and other unwanted material from theinstallation area, spreading of suitable chemical to stop growing unwanted vegitation / grass and maintaining the ground surrounding the installation and removing the same out sidethe defence area as directed by engr in charge. the approx area of installation kept clean all as under.stp no 1 6000 sqm 63 all as per item no 35.01 here in before but stpno 02 4900 sqm 64 all as per item no 35.01 here in before but stp no 3 6100 sqm 65 all as per item no 35.01 here in before but raw sump hameed vihar 3000 sqm 66 all as per item no 35.01 here in before but stp no 4 8000sqm 67 all as per item no 35.01 here in before but stpno 05 12000 sqmnote : for item no 35.01 to 35.06 ( i ) if contractor fail is the clean the area of installation that recovery @ 5000 per job shall be recovered from his dues and contractors claim on this account shall not be entertained. ( ii ) contractor shall provide required t&p like as ( broom, axe, saw, bucket etc ) ( ii ) area will be maintained throughout the contract peroid from the date of commencement to date of completion and the payment will be made at once only. 68 m & l forci butterfly valve 100 mm dia, isi marked, complete with all fittings / accessories, required for fixing complete all as specified and directed 69 m&l for water high pressure gauge including socket welded to measure pressure in the deliverypipe 0 150 psi kg / cm2 make fe / big / guru, ramco or equivalent as approved by ge 70 earthing complete with glavanised steel earth plate elactrode 600mm x600mm x6.0 mm thick buried directly in ground ( earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less 1.5 mtr deep below normal ground level connected to galvanised earth lead strip 25 x 4mm sizeby means of nut , bolt, check nut and washer ofgalvanised iron or of steel, earth lead protected by 40 mm dia gi pipe light grade watering pipe 20 mm dia gi light grade gi wire meshed funnel alternate layer of charcoal and salt pcc chamber , recessed for and including rcc cover including all necessary excavation and earth work, earth wire connected to main switch board, testing the earthing after completion all as specified and shown in electric plate no 3 of mes ssr pt i 2009 print, complete all as specified & directed ( pannel earthing ) . 71 taking out non clog sewage lifting pump set of cap5 to 12.5 hp, 3 phase, 415 volts, 50hz, ac supply along withpipe from the sewage collection well andremoveing mud, plastic, cloth, poleythen, stone etc completeand testing then lowering the same after cleaning complete all as specified and directed 72 taking out old unserviceable pvcbio filter media filling and m&l pvcbio filter mediafilling for mbbbr as per exisiting size all as directed by engr in charge. 73 material and labour for fabrication of retro reflectroised sign board of size exceeding 0.90 sqm as per irc : 67 made of encapsulated lens type reflective sheeting, fixed over aluminium sheet 1.5 mm thick of required size duly written with thematter as directed in blue colourmounted on angle iron / ms pipe support complete and including grouting the sign board in brick work, plastered and white wash on all exposed surfaces or in pcc 1:2:4 type b 2 using 40 mm graded stone aggregate complete all as directed by engineer in charge.note – ( i ) angle iron frame work, pcc, brick work, plastering and white wash shall be measured and paid for separately under appropriate item of schedule a ( ii ) retro reflective sheet and letters shall be astm 4956 type 3 of high intensity grade of make: 3m grade 3870 / kiwalite 22000 / avery dennison series 6200 or equivalent as approved by ge 74 material and labour for mild steel frame work confirming to fe 290 ( gde e 165 ) of sign boards made of m s angle iron or ms square or round pipe of suitable thickness and size as directed duly painted with two coats of synthetic enamel paint over a coat of red oxide primer on exposed surfaces complete all as directed and specified by engineer in charge.note : the surface of angle iron coming in contact with pcc / brick work shall be painted with two coats of bituminous paint and rate quoted for above item shall be deemed to inclusive of same. 75 s & f for rotational moulded polyethylene water cantainer500 litres capacity ( cylindrical vertical with lid ) , double layer, isi marked, fixed in position with pp head, fittings, footvalve, antisyphon valve, end block plateincluding connecting to pipe line assuitable length including testing complete as directed by eic. 76 all as per item no. 44 above but capacity 1000 litres. 77 providing / fabrecation in replacement of fire point stand made out of angle iron 40x40x5mm thickand canopy roof made out of mssheet 22 gauge thick incl provision for hanging 03 buckets fill with sandincluding 02 nos fire extingusher a / b / c type incl pcc foundation, pick axe, belcha complete sample drg approved by engr in charge before fabrication 78 supplying, laying, jointing and testingductile iron pressure pipe centrifugally castisi marked with socket and spigot ends including all necessary fittings with jointing materialsconforming to is 8329 / 2000 standard length , of k7 specification with out zinc coatinglaid in trenches, under floor, road etc of following dia sizes including taking out old unsv hdpe / pvc pipe : 150 mmmake jindal ltd / electrosteel casting ltd / tata or equivalent as approved by ge 79 all as per item no 47.01 here in before but 100 mm 80 m&l for rendering 10 mm thick cement plaster in cm 1:4 on stone masonary orfaces of brick work including finished even and smooth without using extra cement including taking down old complete all as directed. 81 excavation & earth work in trenches n.exc 1.5m wide and n.exc 1.5m in depth and getting out in soft and loose soil including trimming of sides and bottom of trenches complete all as specified and directed. 82 returning, filling in, including spreading, watering and well ramming in layers n.exc 25cm thick each in soft / loose soil complete all as specified and directed. 83 removing excavated surplus soil to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting pointcomplete all as specified and directed. 84 m & l for 3 layer pp r ( polypropylene random copolymer ) concealed pipes sdr 7.4 pn 16 uv stabilised and antimicrobial fusion welded having thermal stability for sewage treated water supply and including all types required fittings with pp r plain & brass threaded polypropylene random fittings laid in trenches complete all as specified and directed of the following sizes : 75 mm dia note :wall thickness of pipe shall beas per is 1580 ( make zindal / sfmc / kanha plastic pvt ltd or equivalent as approved by ge ) 85 all as per item no 52 here in before but 50 mm dia 86 all as per item no 52 here in before but 25 mm dia 87 all as per item no 52 here in before but 15 mm dia 88 disconnecting exisitng lt over heated or burnt cable terminal / joint at panel / feeder pillar & lt cable of any size cutting out over heated / burnt / unserviciable portion of cable, stretching / opening cable to suitable required length etc and fixing aluminium lugs / joint material and suitablenuts bolts & washeretc all as direeted by engr in charge 89 supply and fix of flex board of water installation and machine specification board size 45cm x 60cm fix on fronteach and every equipment , machiney specification given by engr in charge 90 m&l foructech 01 ( liquid floculant ) using for the de established colloidal particales together to form large aggregates of sewage water, dozing 2.5 kg / 50 ppm per day ( for two times ) and using at the time of peak water flow in a settling tank complete all as specified and directed. make : urveeka chemteck pvt ltd, or euivalent makeas approvedby ge 91 m&l for uctech 02 ( liquid coagulant ) using for neutralizing the non settleable particles & allow to form clumps of sewage water, dozing2.5 kg / 50 ppm per day ( for two times ) and using at the time of peak water flow in a settling tank complete all as specified and directed.make : urveeka chemteck pvt ltd, or euivalent makeas approvedby ge 92 m&l for uctech 04 ( liquid disinfectant ) using for deal with bacterial problem and make fare color ofwater, dozing 4 kg / 80 ppm per day ( for two times ) and using at the time of peak water flow in a holdingtank complete all as specified and directed. make : urveeka chemteck pvt ltd, or euivalent makeas approvedby ge 93 m&l foructech 03 ( liquiddeodprizer ) using for stop biological fouling in working zone and make odorless water to provide healthy environment of sewage water , dozing 3 kg / 60 ppm per day ( for three times ) and using at the time of peak water flow in a collectiontank complete all as specified and directed.make : urveeka chemteck pvt ltd, or euivalent makeas approvedby ge 94 m&l for uctech 07 ( nutrient chemical ) using for maintain the ph in 7 8 range to sustain quality of water as per pollution control normof water , dozing 5 kg in a week ( for two times ) and using at the time of peak water flow in a aerationtank complete all as specified and directed. make : urveeka chemteck pvt ltd, or euivalent makeas approvedby ge 95 m& l preparing old steel surfaces and applying one coat of synthetic enamel paint as per existing colour such as ( pipe line, filter tank and pump etc ) including marking ofarrow sign and name in capital letter with black synthetic enamel paintthe following equpt each stp ( i ) treated pump 02 nos ( ii ) filter feed pump 02 nos ( iii ) air blower 02 nos ( iv ) press filter motor 02 nos ( v ) suction / discharge line ( vi ) filter 02 nos 96 s&f 1.25 meter length of gi 20mm dia size medium grade pipe as tapping point pipe by providing 20mm dia bore gate valve with excavation of earth& refilling complete for trenches of size 2.0 x 1.0 x 1.0 meter for existing pipe line dia by proper punching for water tapping& connected with suitable saddle / clamp of size 25 x 3 mm with nut bolts & accessories complete & in pcc ( 1:3:6 ) , type c1, using 20mm graded stone aggregate for stand post of size 200 x 200 x 300mm testing & commissioning on water pressure complete as directed by eic. 97 supply and fix in repair mccb tpn 63 amp to 100 amp , 415 volts, 50 hz 35ka complete all as specified and directed. 98 supply and fix in repair mccb tpn 200 amp , 415 volts, 50 hz 35ka complete all as specified and directed. 99 supply and fix in repair mccb tpn 250 amp , 415 volts, 50 hz 35ka complete all as specified and directed. 100 s&f in repair submersible copper cable pvc insulated over all sheethed flat isi marked of 1100 volts grade of 10 sqmm 3 core. ( make: finolex / l&t / havells ) 101 s&f in repair submersible copper cable pvc insulated over all sheethed flat isi marked of 1100 volts grade of 6 sqmm 3 core. ( make: finolex / l&t / havells ) 102 s&f in replacementair pressure pipe as per existing size approx 6mtr long for connection filter press pump machine incl connection fitting , clamp , nozel etc including testing complete as directed by eic. ...

Due Date : February 23, 2023

Tender Value : ₹ 34.50 Lakhs

View Tender
12
Public Works Department - Rajasthan

35574446 tender for rj 10 01 / 5054 / cm announcement srf rr / plan / 2022 23 1 clearing and grubbing road land including uprooting rank vegetation, grass, brush, shrubs, saplings and trees of girth upto 300mm, removal of stumps, disposal of unserviceable material and stacking of serviceable material upto 1000m from road boundary. ( morth specification : clause 201 ) . by meachnical means in area of light jungle 1.01 leerdi to bhilwara border km 0 / 0 to 1 / 0 1.02 remaining length road from indora to singhola 1.03 geniya to det k.m 0 / 0 to 2 / 600 1.04 lalas to kunwaliya km 0 / 0 to 1 / 0 1.05 undwa ganv to oran ka devra 2 construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting by vibratory roller 8 10 tonne to meet requirement of table 300 2 including cost of compensation for earth taken from private land with lead upto 1 km as per morth specification : clause no. 305. 2.01 leerdi to bhilwara border km 0 / 0 to 1 / 0 2.02 remaining length road from indora to singhola 2.03 geniya to det k.m 0 / 0 to 2 / 600 2.04 lalas to kunwaliya km 0 / 0 to 1 / 0 2.05 undwa ganv to oran ka devra 3 providing, laying, spreading and compacting crushed graded stone aggregate as per table 400 10 & 400.11 to wet mix macadam specifications including premixing the material with water to omc in mechanical mixer ( pug mill ) as per design mix, carriage of mixed material by tipper to site laying in uniform layers, with motor grader / f.e. loader / paver finisher, in sub base / base course on a well prepared under base and compacting with vibratory roller to achieve the desired density including lighting, guarding, barricading and maintenance of driversion etc. ( morth specification : clause 406 ) . with all lead & lift 3.01 leerdi to bhilwara border km 0 / 0 to 1 / 0 3.02 remaining length road from indora to singhola 3.03 geniya to det k.m 0 / 0 to 2 / 600 3.04 lalas to kunwaliya km 0 / 0 to 1 / 0 3.05 undwa ganv to oran ka devra 4 providing, laying and spreading of granular sub base by providing close graded material, mixing in a mechanical mix plant at omc carriage of mixed material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401. by mix in place method grading iii 4.01 leerdi to bhilwara border km 0 / 0 to 1 / 0 4.02 remaining length road from indora to singhola 4.03 geniya to det k.m 0 / 0 to 2 / 600 4.04 lalas to kunwaliya km 0 / 0 to 1 / 0 4.05 undwa ganv to oran ka devra 5 providing and applying primer coat over prepared surface of granular base with bitumen emulsion as per is:8887 & manufacturer‟s specifications @8.5 kg / 10 sqm with a self propelled or towed bitumen pressure sprayer equipped for spraying the material uniformly at specified rates and temperatures ( including cleaning of road surface ) as per morth specification : cl. 502, 112 5.01 leerdi to bhilwara border km 0 / 0 to 1 / 0 5.02 remaining length road from indora to singhola 5.03 geniya to det k.m 0 / 0 to 2 / 600 5.04 lalas to kunwaliya km 0 / 0 to 1 / 0 5.05 undwa ganv to oran ka devra 6 providing and applying tack coat on the prepared surface, with bitumen vg10 as per is:8887 & manufacturer‟s specifications @0.275 kg / sqm with a self propelled or towed bitumen pressure sprayer equipped for spraying the material uniformly at specified rates and temperatures ( including cleaning of road surface ) as per morth specification cl. 502, 112. 6.01 leerdi to bhilwara border km 0 / 0 to 1 / 0 6.02 remaining length road from indora to singhola 6.03 geniya to det k.m 0 / 0 to 2 / 600 6.04 lalas to kunwaliya km 0 / 0 to 1 / 0 6.05 undwa ganv to oran ka devra 7 providing and laying open graded premix carpet 20mm thick ( compacted ) , on prepared surface in a single course as wearing course, composed of specified graded crushed aggregates as per table 500 23, heating bituminous binder @ 14.6 kg / 10 sqm and aggregates in hot mix plant ( including cost of anti stripping compound, wherever required ) , transporting the mixed material with tipper and laying with paver finisher to the required level and grade, rolling with power roller, 8 10 tonne, but excluding cost of tack coat and seal coat with all lead and lift for mix of material ( morth specification : clause 510, 112 ) in hot mix plant 40 60 tph, including loading of aggregates with f.e. loader bitumen vg30 grade 7.01 leerdi to bhilwara border km 0/0 to 1/0 7.02 remaining length road from indora to singhola 7.03 geniya to det k.m 0/0 to 2/600 7.04 lalas to kunwaliya km 0/0 to 1/0 7.05 undwa ganv to oran ka devra 8 providing and applying premixed seal coat type “b” comprising of thin application of fine aggregate (0.06 cum per 10 sqm) premix with (6.8 kg per 10 sqm) bitumen binder (including cost of anti stripping compound, wherever required) in mini hot mix plant 6 10 tph, and laying with paver finisher and rolling with power roller 8 10 tonne, including all lead of mix material (morth specification : clause 511).1). 8.01 leerdi to bhilwara border km 0/0 to 1/0 8.02 remaining length road from indora to singhola 8.03 geniya to det k.m 0/0 to 2/600 8.04 lalas to kunwaliya km 0/0 to 1/0 8.05 undwa ganv to oran ka devra 9 dry lean cement concrete sub base. construction of dry lean cement concrete 1:3:6 sub base over a prepared sub grade with coarse and fine aggregate conforming to is: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blening to be as per table 600 1, cement content not to be less than 200 kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8 10 tonne vibratory roller, finishing and curing. 9.01 leerdi to bhilwara border km 0/0 to 1/0 9.02 remaining length road from indora to singhola 9.03 geniya to det k.m 0/0 to 2/600 9.04 lalas to kunwaliya km 0/0 to 1/0 9.05 undwa ganv to oran ka devra 10 providing and laying un reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with 43 grade cement, coarse and fine aggregate conforming to is:383, maximum size of coarse aggregate not exceeding 25mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14 days, as per drawing and morth specification : clause no. 602, 112. using curing compound and water finishing to lines and grade as per drawing and mord specification clause 1501 including vaccum dewatering process with all required equipments using cement concrete m 30 pavement grade 10.01 leerdi to bhilwara border km 0/0 to 1/0 10.02 remaining length road from indora to singhola 10.03 geniya to det k.m 0/0 to 2/600 10.04 lalas to kunwaliya km 0/0 to 1/0 10.05 undwa ganv to oran ka devra 11 earthwork in excavation in foundation trenches etc. in drains and channels etc. not exceeding 2m depth, including dressing of bottom and sides of trenches, stacking the excavated soil 3m clear from the edge of excavation including disposal of surplus soil as directed within a lead of 1000 metres (morth specification : clause 301, 304). ordinary soil 11.01 leerdi to bhilwara border km 0/0 to 1/0 11.02 remaining length road from indora to singhola 11.03 geniya to det k.m 0/0 to 2/600 11.04 lalas to kunwaliya km 0/0 to 1/0 11.05 undwa ganv to oran ka devra 12 providing & laying mechanically mixed and vibrated cement concrete in foundation upto a depth of 1.5mtr, below ground level and 1.5mtr. above ground/bed level. [morth specification : clause 1000/1700]. (b) cement concrete 1:3:6 mix with stone aggregate 40 mm crusher broken. 12.01 leerdi to bhilwara border km 0/0 to 1/0 12.02 remaining length road from indora to singhola 12.03 geniya to det k.m 0/0 to 2/600 12.04 lalas to kunwaliya km 0/0 to 1/0 12.05 undwa ganv to oran ka devra 13 structural cement concrete (design mix) in open foundations, with form work, at any level. cement concrete for plain/reinforced concrete in open foundations as per drawing and technical specification. [morth specification : section 1700 & 1500]. with 20mm nominal size aggregate by using concrete mixer r.c.c. m 20 grade 13.01 leerdi to bhilwara border km 0/0 to 1/0 13.02 remaining length road from indora to singhola 13.03 geniya to det k.m 0/0 to 2/600 13.04 lalas to kunwaliya km 0/0 to 1/0 13.05 undwa ganv to oran ka devra 14 providing and laying reinforced cement concrete pipes np 4 for culverts including jointing ends and fixing collar with cement mortar 1:2. (morth specification : clause 1000/2900). 1000 mm dia 14.01 leerdi to bhilwara border km 0/0 to 1/0 14.02 remaining length road from indora to singhola 14.03 geniya to det k.m 0/0 to 2/600 14.04 lalas to kunwaliya km 0/0 to 1/0 14.05 undwa ganv to oran ka devra 15 providing and laying steel reinforcement at any level in foundation complete as per drawing and technical specification. [morth specification : section 1600]. hysd bar reinforcement 15.01 leerdi to bhilwara border km 0/0 to 1/0 15.02 remaining length road from indora to singhola 15.03 geniya to det k.m 0/0 to 2/600 15.04 lalas to kunwaliya km 0/0 to 1/0 15.05 undwa ganv to oran ka devra 16 earthwork in excavation in foundation trenches etc. in drains and channels etc. not exceeding 2m depth, including dressing of bottom and sides of trenches, stacking the excavated soil 3m clear from the edge of excavation including disposal of surplus soil as directed within a lead of 1000 metres (morth specification : clause 301, 304). ordinary soil 16.01 leerdi to bhilwara border km 0/0 to 1/0 16.02 remaining length road from indora to singhola 16.03 geniya to det k.m 0/0 to 2/600 16.04 lalas to kunwaliya km 0/0 to 1/0 16.05 undwa ganv to oran ka devra 17 providing & laying mechanically mixed and vibrated cement concrete in foundation upto a depth of 1.5mtr, below ground level and 1.5mtr. above ground/bed level. [morth specification : clause 1000/1700]. (b) cement concrete 1:3:6 mix with stone aggregate 40 mm crusher broken. 17.01 leerdi to bhilwara border km 0/0 to 1/0 17.02 remaining length road from indora to singhola 17.03 geniya to det k.m 0/0 to 2/600 17.04 lalas to kunwaliya km 0/0 to 1/0 17.05 undwa ganv to oran ka devra 18 structural cement concrete (design mix) in open foundations, with form work, at any level. cement concrete for plain/reinforced concrete in open foundations as per drawing and technical specification. [morth specification : section 1700 & 1500]. with 20mm nominal size aggregate with 20mm nominal size aggregate by using concrete mixer r.c.c. m 20 grade 18.01 leerdi to bhilwara border km 0/0 to 1/0 18.02 remaining length road from indora to singhola 18.03 geniya to det k.m 0/0 to 2/600 18.04 lalas to kunwaliya km 0/0 to 1/0 18.05 undwa ganv to oran ka devra 19 providing a.c. pipe weep holes 150mm dia in masonry/plain concrete/reinforced concrete abutment, wing wall/return wall complete as per drawing and technical specification. [morth specification : clause 2205]. 19.01 leerdi to bhilwara border km 0/0 to 1/0 19.02 remaining length road from indora to singhola 19.03 geniya to det k.m 0/0 to 2/600 19.04 lalas to kunwaliya km 0/0 to 1/0 19.05 undwa ganv to oran ka devra 20 providing and laying steel reinforcement at any level in foundation complete as per drawing and technical specification. [morth specification : section 1600]. hysd bar reinforcement 20.01 leerdi to bhilwara border km 0/0 to 1/0 20.02 remaining length road from indora to singhola 20.03 geniya to det k.m 0/0 to 2/600 20.04 lalas to kunwaliya km 0/0 to 1/0 20.05 undwa ganv to oran ka devra 21 reinforced cement concrete m15grade kilometre stone of standard design as per irc:8 1980, fixing in position including painting and printing etc 21.01 ordinary kilometer stone (precast) 21.02 leerdi to bhilwara border km 0/0 to 1/0 21.03 remaining length road from indora to singhola 21.04 geniya to det k.m 0/0 to 2/600 21.05 lalas to kunwaliya km 0/0 to 1/0 21.06 undwa ganv to oran ka devra 21.07 hectometer stone (precast) 21.08 leerdi to bhilwara border km 0/0 to 1/0 21.09 remaining length road from indora to singhola 21.1 geniya to det k.m 0/0 to 2/600 21.11 lalas to kunwaliya km 0/0 to 1/0 21.12 undwa ganv to oran ka devra 22 providing and fixing of retro reflectorised cautionary, mandatory and informatory sign as per irc :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing 90 cm equilateral triangle 22.01 leerdi to bhilwara border km 0/0 to 1/0 22.02 remaining length road from indora to singhola 22.03 geniya to det k.m 0/0 to 2/600 22.04 lalas to kunwaliya km 0/0 to 1/0 22.05 undwa ganv to oran ka devra 23 providing and erecting direction and place identification retro reflectorised sign as per irc :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick with area exceeding 0.9 sqm supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm, 2 nos. firmly fixed to the ground by means of properly designed foundation with m 15 grade cement concrete45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing 23.01 leerdi to bhilwara border km 0/0 to 1/0 23.02 remaining length road from indora to singhola 23.03 geniya to det k.m 0/0 to 2/600 23.04 lalas to kunwaliya km 0/0 to 1/0 23.05 undwa ganv to oran ka devra 24 raised pavment marker ( cats eyes):supplying and fixing of molded shank raised pavement markers made of polycarbonate and abs moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kg tested in accordance to astm d 4280 type h and complying to specifications of category a of morth circular no rw/nh/33023/10 97 – do iii dt 11.06. 1997. the height, width and length shall not exceed 50 mm, 100 mm and 100 mm and with minimum reflective area of 13 sqcm on each side and the slope to the base shall be 35 +/ 5 degree. the strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/ 2 mm and height not less than 30+/ 2 mm) from the body is to be a minimum value of 700 kgf. fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer‟s recommendation and complete as directed by the engineer. the contractor shall submit 2 years pre qualified warranty certificate from the manufacturer for satisfactory field performance during the time of bid submission 24.01 leerdi to bhilwara border km 0/0 to 1/0 24.02 remaining length road from indora to singhola 24.03 geniya to det k.m 0/0 to 2/600 24.04 lalas to kunwaliya km 0/0 to 1/0 24.05 undwa ganv to oran ka devra 25 providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per irc:35 .the finished surface to be level, uniform and free from streaks and holes. 25.01 leerdi to bhilwara border km 0/0 to 1/0 25.02 remaining length road from indora to singhola 25.03 geniya to det k.m 0/0 to 2/600 25.04 lalas to kunwaliya km 0/0 to 1/0 25.05 undwa ganv to oran ka devra 26 supply of village name board size 600x900 mm made out of 1.25 mm thick m.s. sheet duly framed with 30mm outer dia mild steel tube tightened with m.s. flat 12x3 mm fixed on two posts of size 40 mm odms tube 3m long whole board is processed in blue/white stoving enamel paint and white/red machine cut reflective sheet complete in all respect posts duly painted with black/white synthetic enamel. 26.01 leerdi to bhilwara border km 0/0 to 1/0 26.02 remaining length road from indora to singhola 26.03 geniya to det k.m 0/0 to 2/600 26.04 lalas to kunwaliya km 0/0 to 1/0 26.05 undwa ganv to oran ka devra 27 supplying and installation of delineators (road way indicators, hazard markers, object markers), 80 100 cm high above ground level, painted black and white in 15 cm wide strips, fitted with 80 x 100 mm rectangular or 75 mm dia circular reflectorised panels at the top, buried or pressed into the ground and conforming toirc 79 and the drawings. 27.01 leerdi to bhilwara border km 0/0 to 1/0 27.02 remaining length road from indora to singhola 27.03 geniya to det k.m 0/0 to 2/600 27.04 lalas to kunwaliya km 0/0 to 1/0 27.05 undwa ganv to oran ka devra 28 providing and erecting typical citizens information board as per approved drawing & specification of mord, made of two ms sheet of 1.6 mm thick each of size 900 mm × 750 mm stiffened by angle iron 25 mm ×25 mm × 3 mm all around the plate and plates fixed on frame of 75 mm dia pipe of 12 swg sheet (vertical post 3050 m with angle holdfasts and horizontal member 900 mm) to be joined by 5 mm thick ms plate at 12 places (65 × 50 mm) duly embedded in cement concrete m 15 grade of block of 600 mm × 600 mm × 750 mm size below ground level as per enclosed drawings & as directed by engineering in charge. all ms will be stove enameled on both side, lettering, figuring and border will be with ready mixed synthetic enamel paint of superior quality in required shade and colour etc. complete in all respect. all sections of framed post and steel tube will be painted with primer and two coat of epoxy paint as per drawing and as per mord specification. 28.01 leerdi to bhilwara border km 0/0 to 1/0 28.02 remaining length road from indora to singhola 28.03 geniya to det k.m 0/0 to 2/600 28.04 lalas to kunwaliya km 0/0 to 1/0 28.05 undwa ganv to oran ka devra 29 construction of foundation / inaugration pedastal in 23 cm thick brick masonry in cm 1:4 of size 1.20m x 1.80m above ground level with adequate foundation including providing and fixing of granite stone of size 0.75m x0.90m with engraving letters and figures, cement plaster,white washing etc. complete as per direction of engineer in charge. 29.01 leerdi to bhilwara border km 0/0 to 1/0 29.02 remaining length road from indora to singhola 29.03 geniya to det k.m 0/0 to 2/600 29.04 lalas to kunwaliya km 0/0 to 1/0 29.05 undwa ganv to oran ka devra 30 providing, laying and spreading and compacting specified graded crushed stone in sub base course including premixing the material at omc in mechanical mixer (pug mill), carriage of mixed material, laying in uniform layers with motor grader, f.e. loader, on a prepared surface and compacting with vibratory compactor to achieve the desired density including all material, labour, machinery, lighting barricading and maintenance of driversion complete. (morth specification clause 401). with all lead & lift 30.01 leerdi to bhilwara border km 0/0 to 1/0 30.02 remaining length road from indora to singhola 30.03 geniya to det k.m 0/0 to 2/600 30.04 lalas to kunwaliya km 0/0 to 1/0 30.05 undwa ganv to oran ka devra 31 providing and applying primer coat over prepared surface of granular base with bitumen emulsion as per is:8887 & manufacturer‟s specifications @6 kg/10 sqm with a self propelled or towed bitumen pressure sprayer equipped for spraying the material uniformly at specified rates and temperatures (including cleaning of road surface) as per morth specification : cl. 502, 112 add extra to above item per kg extra in emulsion per 10 sqm 31.01 leerdi to bhilwara border km 0/0 to 1/0 31.02 remaining length road from indora to singhola 31.03 geniya to det k.m 0/0 to 2/600 31.04 lalas to kunwaliya km 0/0 to 1/0 31.05 undwa ganv to oran ka devra 32 providing and laying bituminous macadam on prepared surface with specified graded crushed aggregates as per table 500 7, grading 2, for base/binding course including loading of aggregates with f.e. loader and heating & mixing of stone aggregate and bitumen (including cost of anti stripping compound, wherever required) in hot mix plant (40 60 tph), transporting the mixed material in tipper to paver, and laying mixed material with paver finisher to the required level and grade, rolling by power roller and vibratory compactor as per cl. 501.6 & 501.7 to achieve the desired density (approved by the department) excluding cost of primer/tack coat. [morth specification: clause 504, 112]. 50/75mm compacted thickness with 3.3% bitumen vg30 grade with lead of mix material 1 32.01 leerdi to bhilwara border km 0/0 to 1/0 32.02 remaining length road from indora to singhola 32.03 geniya to det k.m 0/0 to 2/600 32.04 lalas to kunwaliya km 0/0 to 1/0 32.05 undwa ganv to oran ka devra 33 providing and laying reinforced cement concrete pipes np 3 for culverts including jointing ends and fixing collar with cement mortar 1:2. (morth specification : clause 1000/2900). 300 mm dia 33.01 leerdi to bhilwara border km 0/0 to 1/0 33.02 remaining length road from indora to singhola 33.03 geniya to det k.m 0/0 to 2/600 33.04 lalas to kunwaliya km 0/0 to 1/0 33.05 undwa ganv to oran ka devra 34 structural cement concrete (design mix) in open foundations, with form work, at any level. cement concrete for plain/reinforced concrete in open foundations as per drawing and technical specification. [morth specification : section 1700 & 1500]. p.c.c. m 15 grade 34.01 leerdi to bhilwara border km 0/0 to 1/0 34.02 remaining length road from indora to singhola 34.03 geniya to det k.m 0/0 to 2/600 34.04 lalas to kunwaliya km 0/0 to 1/0 34.05 undwa ganv to oran ka devra 35 supply of retro reflective name board size 600×900mm made out of 2mm thick aluminium sheet fixed on post and frame made out or angle iron 50×50×6mm 3m long using stainless steel nut bolts of 8mm dia aluminium sheet is covered with high intensity grade retro reflective letters in black post duly painted in black and white synthetic enamel, complete in all respect confirming to morth specifications (2001) cl. 801. 35.01 leerdi to bhilwara border km 0/0 to 1/0 35.02 remaining length road from indora to singhola 35.03 geniya to det k.m 0/0 to 2/600 35.04 lalas to kunwaliya km 0/0 to 1/0 35.05 undwa ganv to oran ka devra 36 supply of villege name board size 600x900 mm made out of 1.25 mm thick m.s. sheet duly framed with 30mm outer dia mild steel tube tightened with m.s. flat 12x3 mm fixed on two posts of size 40 mm odms tube 3m long whole board is processed in blue/white stoving enamel paint and white/red machine cut reflective sheet complete in all respect posts duly painted with black/white synthetic enamel. 36.01 leerdi to bhilwara border km 0/0 to 1/0 36.02 remaining length road from indora to singhola 36.03 geniya to det k.m 0/0 to 2/600 36.04 lalas to kunwaliya km 0/0 to 1/0 36.05 undwa ganv to oran ka devra 37 construction of foundation / inaugration pedastal in 23 cm thick brick masonry in cm 1:4 of size 1.20m x 1.80m above ground level with adequate foundation including providing and fixing of granite stone of size 0.75m x0.90m with engraving letters and figures, cement plaster,white washing etc. complete as per direction of engineer in charge. 37.01 leerdi to bhilwara border km 0/0 to 1/0 37.02 remaining length road from indora to singhola 37.03 geniya to det k.m 0/0 to 2/600 37.04 lalas to kunwaliya km 0/0 to 1/0 37.05 undwa ganv to oran ka devra 38 plain cement concrete 1:3:6 with 40mm nominal mix in foundation with crushed stone aggregate 40mm nominal size mechanically mixed, placed in foundation and compacted by vibrator including curing for 14 days. (morth specification clause : 2100) 38.01 leerdi to bhilwara border km 0/0 to 1/0 38.02 remaining length road from indora to singhola 38.03 geniya to det k.m 0/0 to 2/600 38.04 lalas to kunwaliya km 0/0 to 1/0 38.05 undwa ganv to oran ka devra 39 plastering 20mm thick with cement mortar (1:3) on masonry work in sub structure as per technical specifications. 39.01 leerdi to bhilwara border km 0/0 to 1/0 39.02 remaining length road from indora to singhola 39.03 geniya to det k.m 0/0 to 2/600 39.04 lalas to kunwaliya km 0/0 to 1/0 39.05 undwa ganv to oran ka devra 40 providing and laying pcc m 15 grade leveling course below approach slab complete as per drawing and technical specifications. [morth specification : 2700 40.01 leerdi to bhilwara border km 0/0 to 1/0 40.02 remaining length road from indora to singhola 40.03 geniya to det k.m 0/0 to 2/600 40.04 lalas to kunwaliya km 0/0 to 1/0 40.05 undwa ganv to oran ka devra 41 providing and laying reinforced cement concrete pipes np 3 for culverts including jointing ends and fixing collar with cement mortar 1:2. (morth specification : clause 1000/2900). 1000 mm dia 41.01 leerdi to bhilwara border km 0/0 to 1/0 41.02 remaining length road from indora to singhola 41.03 geniya to det k.m 0/0 to 2/600 41.04 lalas to kunwaliya km 0/0 to 1/0 41.05 undwa ganv to oran ka devra 42 dismantling of flexible pavements and disposal of dismantled materials upto a lead of 1000 mtrs. stacking serviceable and unserviceable materials separately. (morth specifi cation: clause 202) by mechanical means bituminous courses 42.01 leerdi to bhilwara border km 0/0 to 1/0 42.02 remaining length road from indora to singhola 42.03 geniya to det k.m 0/0 to 2/600 42.04 lalas to kunwaliya km 0/0 to 1/0 42.05 undwa ganv to oran ka devra 43 providing and applying tack coat on the prepared surface, with bitumen emulsion as per is:8887 & manufacturer‟s specifications @0.225 kg/sqm with a self propelled or towed bitumen pressure sprayer equipped for spraying the material uniformly at specified rates and temperatures (including cleaning of road surface) as per morth specification cl. 502, 112. 43.01 leerdi to bhilwara border km 0/0 to 1/0 43.02 remaining length road from indora to singhola 43.03 geniya to det k.m 0/0 to 2/600 43.04 lalas to kunwaliya km 0/0 to 1/0 43.05 undwa ganv to oran ka devra 44 add extra for adding shreaded plastic waste as per guideline envisaged in irc sp 98 2013 over item of open graded premix carpet @ 8 % of the quantity of bitumen by weight including mixing of aggregate and plastic waste in hot mix plant ( the bitumen content will be as per respective clause of morth specification) 44.01 leerdi to bhilwara border km 0/0 to 1/0 44.02 remaining length road from indora to singhola 44.03 geniya to det k.m 0/0 to 2/600 44.04 lalas to kunwaliya km 0/0 to 1/0 44.05 undwa ganv to oran ka devra ...

Due Date : January 18, 2023

Tender Value : ₹ 2.47 Crore

View Tender
13
Central Reserve Police Force - Rajasthan

34526217 bids are invited for purchase of building materials and civil items portland cement , coarse sand zone iii , fine sand zone iv , common burnt clay f p s bricks , stone aggregate single size 20 mm nominal size , float glass panes of nominal thickness 5 mm , acrylic distemper 1st quality , acrylic emulsion , acrylic exterior paint , white cement based putty , synthetic enamel paint , synthetic enamel paint in black or chocolate shade , turpentine oil , water proofing cement paint , wire brush , plaster of paris , aluminium paint , twisted steel deformed tmt bars fe 500d 12 mm dia , twisted steel deformed tmt bars fe 500d 10 mm dia , twisted steel deformed tmt bars fe 500d 06 mm dia , kota stone slab 20 mm to 25 mm thick , acid for cleaning tiles, floor cleaner , ply wood 5 ply with commercial ply on both faces 6 mm thick , 12 mm commercial ply , double charge vitrified tile polished finish of size 60 x 60 cm , coloured inter locking c.c. paver block 60 mm thick m 35 , ceramic glazed tiles 1st quality 300 x 300 mm , stainless steel butt hinges 100x58x1.9 mm is 12817 marked , stainless steelbutt hinges 75x47x1.8 mm is 12817 marked , anodisedaluminium handles 125 mm with plate 175 x 32 mm ,anodised aluminium handles 100 mm with plate 150 x 32mm , anodised aluminium tower bolt barrel type 200x10mm , anodised aluminium tower bolt barrel type 150x10mm , anodised aluminium tower bolt barrel type 100x10mm , anodised aluminium hanging type door stopper ,hydraulic door closer bottle type m.s. body , galvanisedwire mesh , 1.0 mm thick decorative laminated sheet , boltsand nuts up to 300 mm in length , stainless steel screws 50mm , stainless steel screws 40 mm , stainless steel screws30 mm , m.s. wire nails , gi,aluminium sheet 0.8 mm thick ,35 mm thick factory made solid panel pvc door shutter ofsingle piece , paint brush 100 mm , paint brush 150 mm, paint roller brush , wood adhesives fevicol , glass sealputty for use in window frame , stainer tube shadepigment 100 ml total qua...

Due Date : November 09, 2022

Tender Value : ₹ Ref. Documents

View Tender
14
Department Of Atomic Energy - Rajasthan

33638694 bids are invited for aluminum sheet (coil) 22 gauges, minimum 1 mtr. width for hot insulation cladding work as per bis is (q3) total quantity : 1500...

Due Date : September 14, 2022

Tender Value : ₹ Ref. Documents

View Tender
15
Dr Sarvepalli Radhakrishnan Rajasthan Ayurved University - Rajasthan

33555781 supply of equipments and models for uch, kekri ajmer hot air oven ( 50 c ) for special standing . temperature ambient up to 250c with least count 10c. . latest technology & modern aesthetics. o capacity ( liters ) : 30 o chamber dimension ( mm ) ( wxdxh ) : 325x310x31 o double metal sheet body with air pocket keep the machine cool. o digital temperature control o perforated stainless steel removable two racks for keeping samples. o insulated glass door window to view the sample. o one main unit ( complete lnside made of ss 316 grade ) . two shelves ( made of ss 316 grade ) 0l 1.02 centrifuge machine electric rotofix o rpm: 500 8000 ( in increments of 100 ) . o max. capacity: 4 x 100m1 / 6 x 94m1. o dimensions ( w x d x h ) : 33 x 46 x27cm o timer: 0 99 minutes +constant. 02 1.03 water bath ( electric ) o lnner chamber & lid s. steel ( ss 304 grade ) . o outer chamber mild steel duly powder coated special grade mineral wool, control panel have on / offswitch, heating & main indicators. o power 22o v / 50 hz. holes o diameter 75 mm, o temperature range s to 10ooc. o temperature error correcting function, portable r simple block changing, convenient for cleaning. . lnstant temperature display, timing decreasing display. 1oo ncubator double walled construction outer s.5304 dull finish lnner s.s316 mirror polished puf insulation between two walled full acrylic door permit inspection of specimen, without disturbing the temp. temp controlled by pid controller with auto tuning facility with accuracy of 0.5c temp range 5 c to 60 c accuracy 0.5c lllumination light are provided for viewing cfc free hermetically sealed compressor provide temp for below ambient condition air circulation fan for marinating temp uniformity throughout the chamber the chamber is provided with modular removable shelves made of s.s. for complete flexibility in use temp range 5c to 50c with accuracy of + 1c double walled, inside anodized stainless steel and outside m.s. powder coated to work on 220 / 230 volts a.c 50hz lnner chamber size ( mm ) wxdxh455x410x610. capacity in cu. ft. 4 cu. ft capacitv 112 liters. 1.05 haemocytometer with rbc & wbc pipettes r cover slip and having wooden box o lmproved neubauer chamber r lmproved bc & wbc chamber, having better quality of cover slip. 2s 1.06 haemoglobinometer ( sahl i ) . lmproved quality chamber having better graduated square tube & properly visible comparator ( standard ) tube. 25 1.07 autoclave ( electric ) o made of heavy seamless aluminium sheet. o size 220mm x 230mm x 38mm o capacity 10ltr. o electric power source 220v.50h2 size: 350mm x 330mm + 90mm lid. ( 14 x 16 ) o suitable for two sterlizing / dressing drum and supplied with inner and outer stand 02 1.08 anaerobic apparatus o made of seamless ss body coupled with ss flange & ss lid 02 1.09 stopwatch ( % sec ) r digital o measuring capacity of 01 second, minute & hour 02 1.10 ph meter . ph range :0 14 ph r resolution : 0.01 ph r temperature range : 00 to 100c ( manual compensation ) r display: 3l / 2dieit led display o power suppiy: 230vac *lo%, 50 hz o catibration check facility & calibration error indication for 7.00 t400 ph 03 sign & seal of firms l.l l high speed centrifuge for serological / hematological work o microprocessor based square m s body duly powder coated double walled light weight abs lid o fitted with microprocessor based 2 lines 16 characters lcd panel for 0 59 minutes countdown timer. o digital rpm meter & programmable speed controller. 0l l.l2 esr ( westergren s / wintrobe ) . equipment for esr estimation / westergrens pipette for esr on standwestergrenss stand. o back aluminum scale having capacity of 6 to 8. westergren stand. 02 sets each l .13 colony counter o digital display o readout 0 999999. 7 segment led display o audible confirmation of each count. o uniform glare free illumination. o wolffhugel glass grid with focusing facility. o led based illumination. o dish size : 110mm o magnification : x1.7 o size:260x255x170mm o accessories: o marking pen 1 o magnifier lens 1 o lens holder 1 o height with integral support stand:3o0mm 01 1, l4 coplin jars . material ppcp ( polypropylene co polymer ) . air tight, no moisture absorption, unbreakable, self standing jar to protect glass slides. r holding capacity 5 slides of size 1n x 3n. 06 1.15 machine for estimation of blood sugar / serological test o glucometerdigitalusage / application r to monitor blood glucose level r measurement range20 600 mg / dl . display digital . sample volume 05 ul 01 l.l6 | semi autoanalyser analysis method: kinetics, end point, two point, etc. power supply:20w / !2y halogen light, life time:2000hr optical system: 340 800nm, 8 hard membrane filter: 340, 380, 405, 492, 5t0, 546, 57 8, 630nm ( wavelength ) accuracyt2nm abs range: 2.500 2.5abs resolution:0.001abs. flow cell: titanium quartz alloy, 33ul; optical path: 10mm. temperature: pelti e r elements, 25, 3037 0.1rei, e precision : er rct

Due Date : August 27, 2022

Tender Value : ₹ 11.50 Lakhs

View Tender
16
Indian Army - Rajasthan

33054817 bids are invited for g2 9535 000004 aluminium sheet hard 1.22 mm , g2 9535 000097 brass foil 160 mm x 0.04 mm , g2 9535 000104 brass foil cold rolled 160x0.05mm , g2 9535000106 brass foil cold rolled 160x0.10mm , g2 9535000105 brass foilo cold rold 160x0.08mm total quantity : 183...

Due Date : July 22, 2022

Tender Value : ₹ Ref. Documents

View Tender
17
Dr Sarvepalli Radhakrishnan Rajasthan Ayurved University - Rajasthan

32933593 supply of equipments, model, articles, glassware, reagents and stains hot air oven ( 50o c ) for special standing centrifuge machine electric rotofix inner chamber & lid s. steel ( ss 304 grade ) . outer chamber mild steel duly powder coated special gtade mineral wool, control panel have on / off switch, heating & main indicators. power220 vl50 hz. holes diameter 75 mm. temperature range 5 to lod c. water bath, electric 3.01 weighing machine dialtype iron analog weighing scale. full metal body with antiskid mal capacity 130 kgs. l 3.02 equipment for reporting height stadiometer height measurement:2 feet to 7 feet t 3.03 vemier and other calipers verrnier caliper 125 mm which is smooth finished ( s.s. ) . i 3.04 blunt plastic / pvc / metallic toys of the following blunt weapons: . stone . brick . motorcycle chain . hammer . wooden log . pistol . rifle . shotgun . spade 10 sign & seal of firms 97 1.05 haemocytometer with rbc & wbc pipettes good quality of improved neubauer chamber, wbc, rbc pipette, cover slip and having wooden box improved neubauer chamber improved bc& wbc chamber, having better quality of cover slip. 25 1.06 haemoglobinometer ( sahli ) shalishb meter. good quality chamber having better graduated square tube & properly visible comparator ( standard ) tube. 25 7.o7 autoclave electric made of heavy seamless aluminium sheet. size 220mmx 230mm x 38mm. capacity loltr. electric power source 220v.50h2 2 1.08 anaerobic apparatus a seamless stainless steel body coupled with ss flange &sslid ensures 2 1.09 stopwatch t / z sec having the measuring capacity of 0.1 second, minute &hour digital 2 1.10 ph meter ph range : 0 14 ph resolution:0.01 ph temperature range : 0.0 to 100c ( manual compensation ) display: 3l12digit led display power supply: 230vac |llyo, 50hz calibration check facility & calibration enor indicationfor 7.00 t4.00 ph 1 1, 11. microscope with oil immersion high quality wide field of 10x antifungal anti reflection coated optics semi plan 4x, 10, 40x, and 100x oil objectives illumination system led 3w with intensity control resulator power supply l00v 240v. 25 1.12 high speed centrifuge for serological / hematolo gical work microprocessor based square m s body duly powder coated double walled light weight abs lid fitted with microprocessor based 2 lines l6 characters lcd panel for 0 59 minutes countdown timer. digital rpm meter & progammable speed controller. i 1.13 esr ( westergrens / wintro be ) equipment for esr estimation / westergrens pipette for esr on standwestergrenss stand. back aluminum scale having capacity of 6 to 8. westergren stand. 02 sets each 1, .1, 4 colony counter 1.15 coplin jars material ppcp ( polypropylene co polymer ) air tight, no moisture absorption, unbreakable, selfstandingjar to protect glass slides. 2 1.16 computer with accessories audio visual aids ( computer led monitor, cpu, speaker, ups ) l 1..17 machine for estimation of blood sugar glucometer digitalusage / application to monitor blood glucose levelmeasurement range 20 600 mgldl display digital, sample volume 0.5 ul 1 list of models required in department of patholow 2.ot atherosclerosis thrombosis and embolism pathology model material: resin size: l8x24 inch weight:2kg 1. 2.02 colon model with pathologies cut away view model of the colon with the following common pathologies: adhesions, appendicitis, bacterial infection, cancer, crohns disease, diverticulitis, diverticulosis, polyps, spastic colon, ulcerative colitis material: resin size: 18x24 inch weieht:2ke 7 2.03 bladder pathology this model is designed to help patients understand the anatomy of diseased bladder. mounted on base. supplied with english key card. size 33 x26 x8 cm approx. weight 720 g. 7 2.o4 pathological stomach model 2.05 pvc liver pathologies model size i 50 1 60cm material pvc color skin weight:2kg l list of required equipmentrarticles for department of forensic me=dicine 3 toxicololv 3.01 weighing machine dialtype iron analog weighing scale. full metal body with antiskid mal capacity 130 kgs. l 3.02 equipment for reporting height stadiometer height measurement:2 feet to 7 feet t 3.03 vemier and other calipers verrnier caliper 125 mm which is smooth finished ( s.s. ) etc...

Due Date : July 12, 2022

Tender Value : ₹ 9.30 Lakhs

View Tender
18
Dr Sarvepalli Radhakrishnan Rajasthan Ayurved University - Rajasthan

32926533 supply of equipments, models, articles, glassware, reagents and stains supply of equipments, models, articles, glassware, reagents and stains for uch jodhpur , list of required equipments for department of pathology & microbiology , hot air oven ( 50o c ) for special standing specifications: temperature ambient up to 25000 with least count 10c. most economical with latest technology & modern aesthetics. double metal sheet body with air pocket keep the machine cool. three fans for cooling body, door & even temperature inside chamber respectively. digital temperature control with display thermostat added to control the transfer of heat for fine temperature control. insulated glass door window to view the sample. perforated stainless steel removable two racks for keeping samples. specification: capacity ( liters ) : 30 chamber dimension ( mm ) ( wxdxh ) : 325x310x315 power watts: 700 w details of the accessories supplied with hot air oven main unit ( complete inside made of ss 316 grade ) : 01 no.s.steel shelves ( made of ss 316 grade ) 02 numbers: 02 nos. hot air oven ( tray dryer ) model 24 trav fan motor shp heating kw 6, trolley, fixed rack , centrifuge machine electric rotofix specification: maximum speed: 500 8000 rpm in increments of 10 rpm. three level speed selection slow medium and fast. alarm, digital display, timer 10x10 ml. single phase ac 220 / 230v timer: 0 99 minutes +constant. dims : 27 x 33 x 46 cm. , water bath, electric specification: inner chamber & lid s. steel ( ss 304 grade ) . outer chamber mild steel duly powder coated special grade mineral wool, control panel have on / off switch, heating & main indicators. power 220 v / 50 hz. holes diameter 75 mm. temperature range 5 to 100?c. , incubator specifications: double walled construction outer s.s304 dull finish inner s.s316 mirror polished puf insulation between two walled full acrylic door permit inspection of specimen, s without disturbing the temp temp. controlled by pid controller with auto tuning facility with accuracy of ‡ 0.5c temp range 5 c to 60 c accuracy ‡0.5c illumination light are provided for viewing cfc free hermetically sealed compressor provide temp for below ambient condition air circulation fan for marinating temp uniformity throughout the chamber the chamber is provided with modular removable shelves made of s.s. for complete flexibility in use. to work on 230 volts 50h2 temp. range 5°c to 50°c with accuracy of + 1°c double walled, inside anodized stainless steel and outside m.s. powder coated to work on 220 / 230 volts a.c 50hz inner chamber size ( mm ) wxdxh 455x410x610. capacity in cu. ft. 4 cu. ft.; capacity 112 liters. , haemocytometer with rbc & wbc pipettes specifications: good quality of improved neubauer chamber, wbc, rbc pipette, cover slip and having wooden box improved neubauer chamber improved bc& wbc chamber, having better quality of cover slip. , haemoglobinometer ( sahli ) specification: shalishb meter. good quality chamber having better graduated square tube & properly visible comparator ( standard ) tube. , autoclave electric specification: made of heavy seamless aluminium sheet. size 220mm x 230mm x 38mm. capacity 10ltr. electric power source 220v.50hz , anaerobic apparatus specification: a seamless stainless steel body coupled with ss flange &sslid ensures , stopwatch ½ sec specification: having the measuring capacity of 0.1 second, minute &hour digital , ph meter specification: ph range : 0 14 ph resolution : 0.01 ph temperature range : 0.0 to 100°c ( manual compensation ) display: 31 / 2 digit led display power supply: 230vac ‡10%, 50 hz calibration check facility & calibration error indicationfor 7.00 t4.00 ph , microscope with oil immersion specification: high quality wide field of 10x antifungal anti reflection coated optics semi plan 4x, 10, 40x, and 100x oil objectives illumination system led 3w with intensity control regulator power supply 100v 240v. , high speed centrifuge for serological / hematological work specification: microprocessor based square m s body duly powder coated double walled light weight abs lid fitted with microprocessor based 2 lines 16 characters lcd panel for 0 59 minutes countdown timer. digital rpm meter & programmable speed controller. , esr ( westergren’s / wintrobe ) specification: equipment for esr estimation / westergren’s pipette for esr on standwestergrenss stand. back aluminum scale having capacity of 6 to 8. westergren stand. , colony counter specification: digital colony counter. readout 0 999999. 7 segment led display. auto marker pen. audible confirmation of each count. uniform glare free illumination. wolffhugel glass grid with focusing facility. led based illumination. , coplin jars specification: material ppcp ( polypropylene co polymer ) air tight, no moisture absorption, unbreakable, self standing jar to protect glass slides. , computer with accessories specification: audio visual aids ( computer led monitor, cpu, speaker, ups ) , machine for estimation of blood sugar specification: glucometer digitalusage / application to monitor blood glucose levelmeasurement range 20 600 mg / dl display digital, sample volume 0.5 ul , list of models required in department of pathology , atherosclerosis thrombosis and embolism pathology model specification: material: resin size: 18x24 inch weight: 2kg , colon model with pathologies specification: cut away view model of the colon with the following common pathologies: adhesions, appendicitis, bacterial infection, cancer, crohns disease, diverticulitis, diverticulosis, polyps, spastic colon, ulcerative colitis material: resin size: 18x24 inch weight: 2kg , bladder pathology specification: this model is designed to help patients understand the anatomy of diseased bladder. mounted on base. supplied with english key card. size 33 x 26 x 8 cm approx. weight 720 g. , pathological stomach model specification: size150 160cm material pvc color skin weight: 2kg , pvc liver pathologies model specification: size150 160cm material pvc color skin weight: 2kg , list of required equipment / articles for department of forensic medicine & toxicology , weighing machine dial type specification: iron analog weighing scale. full metal body with anti skid mat. capacity 130 kgs. , equipment for reporting height specification: stadiometer height measurement: 2 feet to 7 feet , vernier and other calipers specification: verrnier caliper 125 mm which is smooth finished ( s.s. ) . , blunt specification: plastic / pvc / metallic toys of the following blunt weapons: • stone • brick • motorcycle chain • hammer • wooden log • pistol • rifle • shotgun • spade , sharp specification: plastic / pvc / metallic toys of the following sharp weapons: • kitchen knife • chef’s knife • beard knife • cleaver • butcher’s knife • trench knife • sword • axe • sickle , pointed specification: plastic / pvc / metallic toys of the following pointed weapons: • arrow • spear • dart • dagger , models specification: embossed models of the following: • case of drowning. • case of rape. • case of strangulation. • case of hanging. • case of traffic accident. • case of poisoning. • bruises injury. • abrasions injury. • lacerations injury. • contusions injury. , specimens ( organic, inorganic, poison & chemicals ) specification: 500 ml. / 500 gms. packed bottles of the following chemicals: i.inorganic corrosives sulphuric, nitric & hydrochloric acid ii. organic corrosives phenol, oxalic acid iii. inorganic non metallic irritants phosphorus, halogens iv. inorganic metallic irritants arsenic, lead, mercury, copper specimens in the transparent glass / plastic jars of the following poisons: i. organic vegetable irritants abrus, castor, croton, calotropis, semicarpus, ergot. ii. organic animal irritants – snake, scorpion & other common poisonous insects neurotoxic : i. ineberiates ethyl alcohol, methyl alcohol ii. somniferous and sedative hypnotics – opium and derivatives, barbiturates iii. deliriants dhathura, cannabis, cocaine . iv. insecticides / pesticides / agrochemical organo phosphorus compounds. organo chlorides, carbamates , pyrethriods, aluminium phosphide. v. spinal poisons strychnine vi. peripheral poisons curare cardiac poisons oleanders, aconite, tobacco other poisons: i. domestic / household poisons kerosene, detergents, disinfectants, cosmetics, rodenticide mothballs etc. ii. therapeutic drug toxicity / poisoning by medicines salicylates, paracetamol, newer derivatives of sedatives iii. food poisoning bacterial, viral, mushrooms, chemical etc. iv. drugs of dependence and drug abuse , list of required equipment for department of surgeryy , retractor double hook 10 , scissor straight 6 inches , scissor curved 6 inches , cuscos speculam small , cuscos speculam medium , cuscos speculam large , valselum forcep 8 , valselum forcep 10 , ryles tube , stich cutting scissor 6 inches , sponge holding forcep 8 , sponge holding forcep 10 , dest forceps blunt 5 , dest forceps blunt 6 , kocher artery forceps st. 61 , kocher artery forceps cd. 8 , artery forceps cd. 6 , artery forceps cd. 8 , artery forceps st. 6 , artery forceps st. 8 , kocher artery forceps st. 61 , kocher artery forceps cd. 8 , trachial tube 23cm male & 21 cm female , plaster cutter current 5amp , needle holder st. 4 , needle holder st. 5 , needle holder st. 6 , needle holder st. 8 , needle holder st. 9 , toung dipreser ss. st. , toung dipreser ss. cd , instrument tray s.s. 12x15 , kidney tray s.s. 10 , endotracheal tube with cuff , anterior vaginal wall retractor , dilators hegards double ended , allis forceps 8 , allis forceps 6 , plastic aprons , needles curved round , towels , proctoscope , autoscope ( ent box ) , catheter 30cm child, adult 40cm , cannula , list of model , vertebral with femue & pelvis , magnified human larynx , liver, pancreas, duodenum , male urogenital system , anatomy of nasal cavity , human eye , human ear , appendix , list of glass ware required in department of pathalogy , centrifuging conical tubes – 15 ml , pipettes – 10 ml , pipettes – 15 ml , testtubes ( 15ml ) , test tubes stands , test tubes holders , stainingtray ( for pbf ) , watch glass , reagents bottles 125 ml wide mouth , glass slide pkt. , cover slip pkt. , dropping bottles plastic – 120 ml , beaker 25 ml , beaker 50 ml , capillary tubes for blood clotting , list of reagentsrequired in department of pathology , benedict’s solution , fehling’s solution a and b , iodine solution , ringer’s solution , list of stains required in department of pathology , acetocarmine stains , methyl green , pyronin , triple mallory stain , leishman’s stain , safranin , methylene blue , gram positive gram negative...

Due Date : July 12, 2022

Tender Value : ₹ 9.30 Lakhs

View Tender
20
Medical And Health Services - Rajasthan

31879801 supply of medicine, iv fluid, surgical item tablet injection syrup eye ear drops cream ointment , wash bottle plastic fitted stoppers and delivery tube , mentol alchol distilatien arseric test aooratees , clear hplc vial neck amber hpcl vial neck , clear gc headspace vial , multi port hpcl cap , plastic aspirator bottle , plastic wash bottle , plastic measuring cylinder , plastic beaker , retort stand , burette clamp single plastic funnel , membrance filter holder , pipette bulb plastic pipette stand , vortex mixture , test tube stand , bench protector , flask stand , utility tray , burner for lab tlc silica gel aluminium sheet , membrance disc filter , nylon syringe filter , filter paper circle ...

Due Date : April 27, 2022

Tender Value : ₹ 9 Lakhs

View Tender
21
Medical And Health Services - Rajasthan

31878365 rate contract supply of laboratory glassware plastic ware reagents at drugs testing laboratory beaker with spout volumetric flask with glass stopper volumetric flask with glass stopper , volumetric flask with glass stopper, conical flask , measuring cylinder hexagonal base , measuring cylinder with stopper , measuring cylinder hexagonal base , pipette pipette volumetric bulb type , burette , iodine flask , flat bottom flask , separating funnel pear shape with stopcock , funnels , dessicator plain with plane flange , 17 dessicatorvaccunie with plane flanges 18 ivacunidessicatrwithpiafle flanges 19 plane glass dessicator 20 reagent bottie piain ( wide mouth ) screw cap with pouring ring 21 reagent bottle piain ( narrow mouth ) with pouring ring 22 filtration flask 23 goouch crucible 24 round bottom flask 25 test tube 29 test tubes 30 tet tubes without rim 31 capiiiury tube 32 petmi dish 33 jpetridishs line 34 mortal &pestel 3s pipetir tukr ( natural rubber ) 36 drainrng tray 37 aspircdor bottle with swpcuck 38 ttility carrier 39 wash kottle ( l’labtw ) fitted l 1btupperr*nd deiveytuben wash bottle plastic fitted stoppers and delivery tube , mentol alchol distilatien arseric test aooratees , clear hplc vial neck amber hpcl vial neck , clear gc headspace vial , multi port hpcl cap , plastic aspirator bottle , plastic wash bottle , plastic measuring cylinder , plastic beaker , retort stand , burette clamp single plastic funnel , membrance filter holder , pipette bulb plastic pipette stand , vortex mixture , test tube stand , bench protector , flask stand , utility tray , burner for lab tlc silica gel aluminium sheet , membrance disc filter , nylon syringe filter , filter paper circle etc ...

Due Date : May 10, 2022

Tender Value : ₹ 11 Lakhs

View Tender
22
Department Of Local Bodies - Rajasthan

31810325 civil work for auditorium for nagar parishad, dausa, rajasthan civil work for auditorium for nagar parishad, dausa, rajasthan earth workclearing grass and removal of rubbish (maximum 150mm) by manual means and disposal at a lead of 50 metres as per mort&h specification clause 201. 2 earth work in excavation in open area, stp, wtp, pumping station with mechanical means including dressing of sides and ramming of bottoms, including getting out the excavated material, disposal of excavated material lead upto 1000m at suitable site as per as per drawing and as per direction of engineer. (measurements for payment to be done as per standard drawings). in all type of soil. upto 3.0 m depth. 3 earth work in excavation in foundation, trenches etc. including dressing of sides and ramming of bottoms, including getting out the excavated material, refilling after laying pipe/ foundation and disposal of surplus excavated material at a lead upto 50m suitable site as per direction of engineer for following depths, below natural ground / road top level. in all types soils/ saturated soil such as moorum, sand, sandy silt, clay, black cotton soil, kankar, etc. depth upto 1.5 m. 4 add extra for over all depth of excavation above 1.5 m and upto 3.0 m over item no 4.10.1.1 5 in ordinary rock. depth upto 1.5 m. 6 add extra for over all depth of excavation above 1.5 m and upto 3.0 m over item no 4.10.2.1 7 carriage of materials by mechanical transport including loading, unloading and stacking ::upto 1 km 8 stone, boulders, gravelly materia 9 earth filling with available surplus soil excavated from foundations and taken only from outside of building plinth in layers not exceeding 20cm in depth, consolidating each deposited layer including ramming and watering and consolidation with lead up to 50 m and lift upto 1.5 m. 10 diluting and injection chloropyrifos emulsifiable concentrate 20% with 1% concentration for pre constructional anti termite treatment as per is 6313 part iii as amended from time to time and creating a continuous chemical barrier under and around the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of wall and floor along the external perimeter of building expansion joints, over the top surface of consolidated earth of which approach is to be laid surrounding of pipes and conduits etc. complete as per specification (plinth floor area only shall be measured for payment and excluding the cost of chemical emulsion). 11 providing and laying of filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of mort&h specifications with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and technical specification including all material, labour, machinery as per clause 710.1.4 of irc:78 and clause 2200 of mort&h specification. 12 concrete work 13 providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering all work upto plinth level 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). 14 making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed by dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. 15 reinforced cement concrete 16 providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement all work upto plinth level 1:1:2 (1 cement : 1 coarse sand : 2 graded stone aggregate 20 mm nominal size). (as per design mix). 17 reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto two stories excluding cost of centring, shuttering, finishing and reinforcement :1:1:2 (1 cement : 1 coarse sand : 2 graded stone aggregate 20 mm nominal size) (as per design mix) 18 reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto two stories excluding the cost of centring, shuttering, finishing and reinforcement: m 30 grade concrete. 19 reinforced cement concrete work in arches, arch ribs, domes, vaults, shells, folded plate and roofs having slope more than 15° upto two stories excluding the cost of centring, shuttering, finishing and reinforcement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). 20 providing and laying upto two stories reinforced cement concrete in kerbs, steps and the like excluding the cost of centring, shuttering, finishing and reinforcement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). 21 add extra for laying reinforced cement concrete above two stories (or 7.50 mtr height above plinth level) for every one storey or 3.00 m height or part thereof. 22 centring and shuttering with plywood or steel sheet upto two stories or height upto 7.5 metre above plinth level including strutting, propping etc. and removal of form for foundations, footings, bases of columns, etc. for mass concrete. 23 walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. 24 suspended floors, roofs, landings, balconies and access platform. 25 lintels, beams, plinth beams, girders, bressumers and cantilevers. 26 columns, pillars, piers, abutments, posts and struts.22.1.5 27 stairs, (excluding landings) except spiral staircases. 28 extra for shuttering in circular work (20% of respective centring and shuttering items). 29 edges of slabs and breaks in floors and walls. under 20 cm wide. 30 weather shade, chajjas, corbels etc., including edges. 31 add extra for doing centering and shutteriing work for every additional height of 1 metre or part thereof beyond initial 7.5 metre height from plinth level. 32 reinforcement for r.c.c. work at all levels including straightening, cutting, bending, placing in position and binding all complete. thermo mechanically treated bars. 33 brick / stone masonery work 34 brick work with fps bricks of class designation 75 in foundation and plinth in cement mortar 1:4 (1 cement : 4 coarse sand). 35 brick work with fps bricks of class designation 75 in superstructure above plinth level upto two stories in all shapes and sizes in cement mortar 1:4 (1 cement : 4 coarse sand). 36 half brick masonry with fps bricks of class designation 75 in superstructure above plinth level upto two stories. cement mortar 1:3 (1 cement :3 coarse sand). 37 extra for providing and placing in position 2 nos. 6mm dia. m.s. bars at every third course of half brick masonry. 38 random rubble stone masonry work in cement mortar with mechanical mixer in foundation (at any level) complete as per drawing and technical specification and as per clause 1000 and 1400 of mort&h specification including all scaffolding material, labour, machinery but excluding pointing and plastering. in cement mortar 1:4 (1 cement : 4 coarse sand). 39 providing and fixing granite stone slab mirror polished and machine edge cut in walls, pillars, steps, shelves, sills counters, floors etc. laid on 12mm (av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. green / black above 3601 cm2 slabs. 40 extra for providing edge moulding to 15 18mm thick marble/ granite stone counters, vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by engineer in charge. granite/kota stone work. moulding. 41 extra for providing opening of required size & shape for wash basins/ kitchen sink in kitchen platform, vanity counters and similar location in marble/granite/stone work including necessary holes for pillar taps etc. including rubbing and polishing of cut edges etc. complete 42 providing and fixing 1st quality mat finished ceremic tile size 300x300mm confirming to is : 13755 and is : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4). 43 extra for using marble printed / granite shade or dark shade tiles instead of white, grey, ivory, fume red brown, light green, light blue and other light shades in glazed tiles and mat finished tiles 44 providing and fixing motive pieces all coloures for glazed tiles laid over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white mixed with pigment of matching shade complete. size 200 x 300mm. 45 p & f 1st quality vitrified porcelain polished tiles on floor, skirting and steps etc.in different sizes (thickness to be specified by manufactuer) with water absortion less than 0.08% and conforming to is 15622 of approved make in all colour and shade, laid with 20 mm thick cm 1 : 4 including grounting the joints with white cement and matching pigment etc complete. size 600 mm x 600 mm. 46 providing and fixing 1st quality mat & glossy finished ceramic tiles colour such as standard white, grey, ivory, fume, red brown, light green, light blue, and other light shades with water absorbtion less than or equal to 0.08% confirming to is : 13753 & is : 15622 in floor, steps etc laid on bed on neat cement slury finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the the cost of cement mortar bed 1:4) size 300mm x 450mm. 47 providing and fixing 1st quality ceramic glazed vitrified tiles of colour standard white, grey, ivory, fume, red brown, light green, light blue, and other light shades with water absorbtion less than or equal to 0.08% confirming to is : 13753 & is : 15622 in floor, steps etc laid on bed on neat cement slury finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete. (excluding the the cost of cement plaster on wall and pillar). size 600mm x 1200mm 48 38mm thick wood block flooring of first class teak wood laid over 25mm thick levelling layer of cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 10mm nominal size) to be paid separately coated with a thin layer of hot bitumen (blown type) @ 2.45 kg per sqm. including fixing blocks in position after dipping in hot bitumen (blown type) upto half depth, planed, levelled smooth and finished complete. 49 kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. 50 40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) including pointing with cement mortar 1:2 (1 cement : 2 stone dust) with an admixture of pigment to match the shade of stone. red sand stone. 51 extra for pre finished nosing in treads of steps of kota stone/ sand stone slab. 52 roofing 53 providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design in 75x75mm deep chase. 54 providing corrugated g.s. sheet roofing including vertical/ curved surface fixed with polymer coated j or l hooks, bolts and nuts 8 mm diameter with bitumen and g.i. limpet washers or with g.i. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete upto any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.80mm thick with zinc coating not less than 275gm/m². 55 extra for circular cutting in c.g.s. sheet roofing for making opening of area exceeding 40 square decimetre 0.80 mm thick 56 providing and fixing 15 cm wide 45 cm over all semi circular plain g.s. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc. including making necessary connections with rain water pipes complete. 0.80mm thick with zinc coating not less than 275gm/m² 57 cement plastering including t&p, scaffolding, material and complete labpour, including cost of water, curing, racking of joints etc. with 15 mm cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement : 4 fine/ coarse sand) 58 cement plastering including t&p, scaffolding, material and complete labpour, including cost of water, curing, racking of joints etc. with 20 mm cement plaster of mix : 1:4 (1 cement : 4 fine/ coarse sand). 59 cement plastering including t&p, scaffolding, material and complete labpour, including cost of water, curing, racking of joints etc. with 6 mm cement plaster 1:3 (1 cement : 3 fine sand) finished with a floating coat of neat cement and thick coat of lime wash on top of walls when dry for bearing of r.c.c. slabs and beams. 60 extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers. 61 18 mm thick moulded cement mortar band in two coats under layer 12mm thick with cement mortar 1:5 (1 cement : 5 coarse sand) toplayer 6mm thick with cement mortar 1:4 (1 cement : 4 fine sand). design on outer plaster. 62 extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof. 63 wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: two or more coats on new work. 64 finishing walls with acrylic smooth exterior paint of required shade new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm). 65 painting with synthetic enamel paint of approved brand and manufacture to give an even shade two or more coats on new work. 66 providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete 67 providing and fixing thermal insulation with resin bonded fibre glass wool conforming to is : 8193, density 16kg/m3 , 50mm thick, wrapped in 200g virgin polythene bags placed over existing false ceiling and held in position by criss crossing gi wire. 68 providing and fixing machine moulded aluminium covering of approved pattern & design, made out of machine cut aluminium sheet and machine holed for receiving screws, over expansion joints on vertical surfaces/ceilings with full threaded, cadmium plated steel screws 4mm dia. stem, 30mm long and aluminium washers 2mm thick, 15mm dia. at a staggered pitch of 200mm centre to centre including drilling holes in the receiving surface and providing expandable plastic sleeves in holes etc. complete. powder coated aluminium sheet 2.5mm thick (minimum thickness of powder coating 50 micron). 69 filling the gap in between aluminium frame & adjacent rcc/ brick/ stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of engineer in charge complete. upto 5mm depth and 5 mm width. 70 providing and laying expansion joint complete as per drawing and technical specification and as per clause 2605 of mort&h specification including all material, labour, machinary etc. 71 fillar joint with 20m thick compressible fibre board. 72 fillar joint with joint sealing compound with coarse sand and 6 %bitumen by weight. 73 structural steel work riveted,bolted or welded in built up sections, trusses and framed work, including cutting, hoisting (height upto 10 m) , fixing in position and applying a priming coat of approved steel primer all complete: hot finished seamless type tubes. 74 providing and fixing t iron frames for doors, windows and ventilators of mild steel tee sections, joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10 cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or with dash fastener or rawl plugs and screws or with fixing clips or with bolts and nuts as require including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. 75 providing and fixing pressed steel door frames confirming to is: 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike plate and shock absorbers as specified and applying a coat of approved steel primer after pre treatment of the surface as directed by engineer in charge: profile c 76 providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing and staircase railing including applying a priming coat of approved steel primer. m.s. tube. 77 providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5mm size with top and bottom rail of t iron 40x40x6mm with 40mm dia, steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. 78 providing and fixing external grade board solid core single leaf flush door shutters isi 2202 67 marked using phenol formal dehyderesin in glue both sides including approved isi marked stainless steel butt hinges fittings with necessary screws complete as per annexure a : 30 mm thick decorative teak veneer both side. 79 extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of shutters (over all area of door shutter to be measured). decorative teak veneer both side. 80 extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured) rectangular or square. 81 extra for cutting rebate in flush door shutters for making double leaf shutter(total area ofthe shutter to be measured). 82 providing and fixing expandable fasteners of specified size with necessary plastic sleeves and galvanised m.s. screws including drilling holes in masonry work /cc/ r.c.c. and making good etc. complete. 50 mm long. 83 providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with c.p. brass screws and wooden plugs, etc., wherever necessary complete: 20 mm dia. 84 providing and fixing to existing door frames. 30mm thick factory made solid both side pre laminated panel pvc door shutter consisting of frame made out of m.s. tubes of 19 gauge thickness and size of 19mm x 19mm for styles and 15x15mm for top & bottom rails. m.s. frame shall have a coat of steel primers of approved make and manufacture. m.s. frame covered with 5mm thick heat moulded pre laminated pvc c channel of size 30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45degree angle on either side forming styles; and 5mm thick, 95mm wide pvc sheet out of which 75mm shall be flat and 20mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115mm wide pvc sheet out of which 75mm shall be flat and 20mm shall be tapered on both sides to form lock rail. top, bottom and lock rails shall be provided either side of the panel. 10mm (5mm x 2 ) thick, 20mm wide cross pvc sheet be provided as gap insert for top rail & bottom rail. paneling of 5mm thick both side pre laminated pvc sheet to be fitted in the m.s. frame welded/ sealed to the styles & rails with 7mm (5mm+2mm) thick x 15mm wide pvc sheet beading on inner side, and joined together with solvent cement adhesive. an additional 5mm thick pvc strip of 20mm width is to be stuck on the interior side of the c channel using pvc solvent adhesive etc. complete as per direction of engineer in charge. manufacturer’s specification & drawing (for w.c. and bathroom door shutter). 85 aluminium work 86 providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate z sections and other sections of approved make conforming to is: 733 and is: 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required pvc/neoprene felt etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / panelling, c.p. brass / stainless steel screws, all complete as per architectural drawings and the directions of engineer in charge. (glazing and panelling to be paid for separately) : for fixed portion. anodised aluminium (anodised transparent or dyed to required shade according to is: 1868, minimum anodic coating of grade ac 15). 87 for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of pvc / neoprene gasket required (fittings shall be paid for separately). powder coated aluminium (minimum thickness of powder coating 50 micron). 88 providing and fixing in wall lining flat pressed three layer (medium density) particle board or graded wood pre laminated one side decorative lamination on other side balancing lamination grade i, type ii, is : 12823 marked including priming coat on unexposed surface, with necessary fixing arrangement and screws etc. complete : 25 mm thick 89 providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with pvc/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer incharge . (cost of aluminium snap beading shall be paid in basicitem) : with float glass panes of 5.50 mm thickness. 90 providing and fixing double action hydraulic floor spring of approved brand and manufacture is : 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece m.s. sheet outer box with slide plate etc. complete as per the direction of engineer in charge. with stainless steel cover plate. 91 providing and fixing stainless steel (ss 304 grade) adjustable friction windows stays of approved quality with necessary stainless steel screws etc. to the side hung windows as per direction of engineerin charge complete. 355 x 19 mm. 92 interior work 93 false ceiling 94 providing and fixing at all height false ceiling including providing and fixing of frame work made of special sections power pressed from m.s. sheet and galvanised in accordance with zinc coating of grade 350 as per is : 277 and consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 22mm and 37mm at 1200mm centre to centre one flange fixed to the ceiling with dash fastener 12.5mm diax40mm long with 6mm dia bolts to the angle hangers of 25x25x0.55mm of required length, and other end of angle hanger being fixed with nut and bolts to g.i. channels 45x15x0.9mm running at the rate of 1200mm centre to centre to which the ceiling section 0.5mm thick button wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre shall be fixed in a direction perpendicular to g.i. channel with connecting clips made out of 2.64mm diax230mm long g.i. wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm centre to centre with 25mm long drive all screws @ 230mm interval including jointing and fixing to a flush finish of tapered and square edges of the board with recommended filler, jointing tapes, finisher and two coats of primer suitable for board as per manufactures specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of the engineer in charge but excluding the cost of painting with 12.5 mm thick tapered edge gypsum board conforming to is: 2095 part i, 95 sanitary items 96 plumbing 97 providing and fixing unplasticised p.v.c. connection pipe with ptmt nuts collar and bush of approved quality and colour. 98 15 mm nominal bore with 3 cm length. 99 15 mm nominal bore with 45 cm length. 100 providing and fixing ptmt ball cock of approved quality, colour and make complete with epoxy coated aluminium rod with l.p./ h.p.h.d. plastic ball.20 mm nominal bore, 120 mm long. weighing not less than 198 gms. 101 providing and fixing ball valve (brass) of approved quality, high or low pressure, with plastic floats complete : 102 15 mm nominal bore 103 20 mm nominal bore 104 25 mm nominal bore 105 providing and fixing gun metal non return valve of approved quality (screwed end) : 106 25 mm nominal bore horizontal 107 25 mm nominal bore vertical 108 providing and placing on terrace (at all floor levels) polyethylene water storage tank isi : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank 109 sanitary 110 providing and laying flanged c.i. standard specials such as tees, bends, collars, tapers, caps etc., suitable for flanged jointing as per is : 1538 : upto 300 mm dia. 111 providing and laying s&s centrifugally cast (spun) iron pipes (class la) conforming to is 1536 : 112 100 mm dia. pipe 113 125 mm diameter pipe 114 providing lead caulked joints to spun iron or c.i. pipes and specials including testing of joints but excluding the cost of pig lead : 115 100 mm diameter pipe 116 125 mm diameter pipe 117 supplying pig lead at site of work. 118 providing, laying and jointing glazed stoneware pipes grade ‘a’ with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 200 mm diameter 119 constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) r.c.c. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design : 120 inside size 90x80 cm and 45 cm deep including c.i. cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : with bricks with class designation 75 121 inside size 120x90 cm and 90 cm deep including c.i. cover with frame (heavy duty) 560 mm internal diameter, total weight of cover and frame to be not less than 208 kg (weight of cover 108 kg and weight of frame 100 kg) : with bricks class designation 75 122 providing and fixing square mouth s.w. gully trap grade a’ complete with c.i. grating brick masonry chamber with water tight c.i. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design : 100x100 mm size p type with bricks class designation 75. 123 constructing brick masonry road gully chamber 45x45x77.5 cm with bricks of class designation 75 in cement mortar 1:4 (1 cement : 4 coarse sand ) with precast r.c.c. vertical grating complete as per standard design with bricks. 124 constructing brick masonry road gully chamber 110x50x77.5 cm with bricks of class designation 75 in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm precast r.c.c. horizontal grating with frame and vertical grating complete as per standard design with bricks 125 fixtures 126 providing and fixing white vitreous china pedestal type water closet (european type) with seat and lid, 10 litre low level white vitreous china flushing cistern & c.p. flush bend with fittings & c.i. brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required : w.c. pan with isi marked white solid plastic seat and lid. 127 providing and fixing wash basin with c.i. brackets, 15 mm c.p. brass pillar taps,32 mm c.p. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : white vitreous china surgeon type wash basin of size 660x460 mm with a pair of 15 mm c.p. brass pillar taps with elbow operated levers. 128 providing and fixing kitchen sink with c.i. brackets, c.p. brass chain with rubber plug, 40 mm c.p. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required : white glazed fire clay kitchen sink of size 600x450x250 mm. 129 providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : 130 rectangular shape 453x357mm 131 rectangular shape 1500x450 mm 132 providing and fixing 100 mm sand cast iron grating for gully trap 133 providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. 134 providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors 100 mm inlet and 100 mm outlet 135 providing and fixing c.p. brass angle valve for basin mixer and geyser points of approved quality conforming to is:8931. 15 mm nominal bore 136 providing and fixing ptmt soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements. weighing not less than 106 gms. 137 providing and fixing stone slab table rubbed, edges rounded and polished of size 75x50 cm deep and 1.8 cm thick fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of engineer incharge and finished smooth. granite stone of approved shade 138 providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe. 139 providing and fixing g.i. pipes complete with g.i. fittings and clamps, including cutting and making good the walls etc. 140 internal work exposed on wall 15 mm dia. nominal bore 141 internal work exposed on wall 20 mm dia. nominal bore 142 internal work exposed on wall 25 mm dia. nominal bore 143 internal work exposed on wall 32 mm dia. nominal bore 144 concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall. 15 mm dia. nominal bore 145 concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall. 20 mm dia. nominal bore 146 providing and fixing g.i. pipes complete with g.i. fittings including trenching and refilling etc. external work : 147 15 mm dia. nominal bore 148 20 mm dia. nominal bore 149 25 mm dia. nominal bore 150 32 mm dia. nominal bore 151 painting g.i. pipes and fittings with synthetic enamel white paint over a ready mixed priming coat, both of approved quality for new work : 152 15 mm dia. nominal bore 153 20 mm dia. nominal bore 154 25 mm dia. nominal bore 155 32 mm dia. nominal bore 156 painting g.i. pipes and fittings with two coats of anti corrosive bitumastic paint of approved quality : 157 15 mm dia. nominal bore 158 20 mm dia. nominal bore 159 25 mm dia. nominal bore 160 32 mm dia. nominal bore 161 providing and fixing g.i. union in g.i. pipe including cutting and threading the pipe and making long screws etc. complete (new work) 162 15 mm nominal bore 163 20 mm nominal bore 164 25 mm nominal bore 165 water harvesting system 166 construction of tube well upto 100 meter depth and above in all type of rocks by dth system and over burden to accommodate casing pipe of following sizes in all types of soils and over burden including lowering of casing pipes but excluding cost of casing pipes as per is : 2800 (part i & ii) 1979 specifications. the work would be completed after obtaining sand free water. the tube well should have a throughout bore as per nominal dia of casing pipe: 200 mm dia nominal bore 167 supply of strainer pipes made of erw m.s. black pipe isi mark of following sizes at the site of work including required size of slotting as per is:8110 1985 of following nominal bore sizes at site of work. 200 mm dia 168 supply and fixing of m.s. clamp set of 50 ×6mm flat iron with nuts and bolts etc. for holding the riser pipe assembly of submersible pump set. 169 providing & lowering of g.i. flange pipe b class including rubber washer and nuts of 8 mm dia complete in all respect. 50 mm dia 170 development of tube well as per is specification using suitable compressor to give sand free water for required yield of the gravel packed tube well. 171 electrical g schedule 172 wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv gradeand 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) ofapproved make in surface / recessed isi markedmms ( is:9537 p iii ) pvc conduit & its accessories, round tiles,18 swg m.s. box with earth terminal, 6 a switch, 3.0 mm thick isi marked phenolic laminated sheet, zinc plated / brassscrews, cup washers, making connections, testing etc. as required. 173 short point (up to 3 mtr.) 174 medium point (up to 6 mtr.) 175 long point(up to 10 mtr..) 176 wiring of twin control light / fan / call bell point with 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv gradeand 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) of approved make in surface / recessed isi marked mms ( is:9537 p iii ) pvc conduit & its accessories, round tles,18 swg m.s. box with earth terminal, 6 a two way switch, 3.0 mm thick isi marked phenolic laminated sheet, zinc plated / brassscrews, cup washers, making connections, testing etc. as required. 177 short point (up to 3 mtr.) 178 medium point (up to 6 mtr.) 179 long point(up to 10 mtr..) 180 wiring of 3 pin 6 amp. light plug point with 1.5 sq. mm fr pvc insulated unsheathed 1.1 kv grade flexible copper conductor and 1.5 sq.mm fr pvc insulated unsheathed 1.1 kv grade copper earth conductor (is:694) of approved make double lock/ isi marked single lock pvc casing capping & its accessories, 18 swg m.s. box with earth terminal, screwless cage connectors for neutral looping in switch board & falce ceiling point, 6 a switch, 6 a socket, 3.0 mm thick phenolic laminated sheet, zinc plated / brass screws, cup washers, making connections, testing etc. as required. 181 on board 182 short point (up to 3 mtr.) 183 medium point (up to 6 mtr.) 184 long point(up to 10 mtr..) 185 s&f following sizes (dia.) of isi marked medium duty pvc conduit along with accessories in surface / recessed using saddles, clamps, fastener as required including cutting the wall and making good the same as required. 186 20 mm 187 25 mm 188 32 mm 189 supplying and drawing fr pvc insulated & unsheathed flexible copper conductor isi marked (is:694) of 1.1 kv grade and approved make in existing surface or recessed conduit/casing capping including making connections etc. as required. 190 3x 1.5 sq.mm 191 2 x 2.5 sq. mm. + 1x1.5sqmm 192 2 x 4.0 sq. mm. + 1 x 2.5 sq. mm. 193 2 x 6.0 sq. mm. + 1 x 2.5 sq. mm. 194 4 x 10.0 sq.mm 195 4 x 16.0 sq.mm 196 supplying and drawing pvc jacketed with annealed bare copper inner conductor & tinned copper conductor shielding foam pe dielectric coaxial cable of approved make in existingsurface or recessed conduit/casing capping including making connections as required. 197 rg 6 198 rg 11 199 supplying and drawing pvc/ polythene insulated and pvc sheathed unarmoured/ armoured telephone cable with 0.5 mm dia. tinned / annealed copper conductor taped &confirming to itd specification s/ws 112c &113 c of approved make in existing surface or recessed conduit/casing capping. 200 unarmoured 2 pair 201 unarmoured 10 pair 202 unarmoured 20 pair 203 unarmoured 50 pair 204 jelly filled armoured (pijf) 5 pair 205 jelly filled armoured (pijf) 10 pair 206 jelly filled armoured (pijf) 20 pair 207 jelly filled armoured (pijf) 50 pair 208 p&f recessed/ surface mounting heavy duty horizontal type sheet steel distribution board phophatised/ powder painted complete with copper bus bar, shorting link , neutral link, earth link and din bar masking sheet conforming to is13032 & is8623 including making internal db terminations with copper lugs , testing etc. as required. double door (three phase) per phase isolation 209 2+8 way 210 2+12 way 211 providing & laying xlpe insulated / p.v.c. sheathed cable of 1.1 kv grade with aluminium conductor armoured of is:7098 i/1554 1 approved make in ground as per is:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand, second class bricks covering, refilling earth, compaction of earth, making necessary connection, testing etc. as required of size. 212 2.5 sq. mm 4 core 213 4.0 sq.mm 4 core 214 6.0 sq.mm 4 core 215 10.0 sq.mm 4 core 216 16.0 sq.mm 4 core 217 25.0 sq.mm 3.5 core 218 35.0 sq.mm 3.5 core 219 50.0 sq.mm 3.5 core 220 70.0 sq,mm 3.5 core 221 95.0 sq.mm 3.5 core 222 120.0 sq.mm 3.5 core 223 150.0 sq.mm 3.5 core 224 240.0 sq.mm 3.5 core 225 300.0 sq.mm 3.5 core 226 supplying and making one end termination with heavy duty single compression brass gland sibg type, heavy duty aluminium lugs duly crimped with crimping tool, pvc tape etc for following size of armoured pvc insulated & pvc sheathed/ xlpe aluminium conductor cable of 1100 volt grade as required of size. 227 3.5 x 25.0 sq.mm 228 3.5 x 35.0 sq.mm 229 3.5 x 50.0 sq.mm 230 3.5 x 70.0 sq.mm 231 3.5 x 95.0 sq.mm 232 3.5 x 120.0 sq.mm 233 3.5 x 150.0 sq.mm 234 3.5 x 240.0 sq.mm 235 3.5 x 300.0 sq.mm 236 4 x 2.5 sq.mm 237 4 x 4.0 sq.mm 238 4 x 6.0 sq.mm 239 4 x 10.0 sq.mm 240 4 x 16.0 sq.mm 241 supply, fabricating & installing following sizes of perforated cable trays including horizontal and vertical bends, reducers tees,cross members and other accessories as required and duly suspended from the ceiling with suspenders and including painting as required. hot dipped galvanized. 242 150mm x 50mm x 1.6mm 243 300mm x 50mm x 1.6mm 244 450mm x 50mm x 2.0mm 245 600mm x 50mm x 2.0mm 246 maintenance free gel earthing with pipe in pipe /strip in pipe technology filled with anti corrosive conductive compound (cpri tested) below the ground in 150 200 mm dia earth pit and surrounding filled with required mineral filling compound (mfc should have hygroscopic proper ty to retain the moisture for long time to create low resistance zone) and c.c. finished chamber covered with hinge type with locking arrangement c.i cover. c.i. frame of size 300mm x300mm complete testing of earth resistance as required of following sizes with pipe in pipe technology (inner pipe dia / outer pipe dia) 80 100 micron g.i. coating with pipe in pipe technology with 80 100 micron g.i. coating g.i. pipe 3000 mm long , 80/40 mm , terminal 14 mm g.i. strip 247 s & laying following size earth wire/stripin horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required. 248 8 swg copper wire 249 25mm x 3mm copper strip 250 50mm x 6mm copper strip 251 25mm x 3mm g.i. ( hot dipped) strip 252 25mm x 6mm g.i. ( hot dipped) strip 253 p & f of ip20 led recessed/ surface mounted round/ sqaure non dimmable downlight with die cast aluminum housing & heat sink for heat dissipation, high purity reflector with external driver having efficiency > 85% and in compliance to iec standards. ( supplied together with luminaire) power consumption of =< 7w/10w/8w/12w/15w/18w with 100/500/750/1100/1250 lumens, system lumen, efficeancy of 70 lm / watt or 100 lm / watt output suitable to replace 1x18w/ 2x18w/2x26w cfl downlights, life time of 50000 burning hours with 70% of intial lumen maintained. cct 3000° k, 4000° k and 6000° k. fixture shall be ce compliance. 254 recessed mounting led downlight 18/20w 255 surface mounting led downlight 18/20w 256 p & f of ip20 led ceiling/ recessed/ suspended mounting light fixture made form crca sheet steel housing, high purity/ transmisivity diffuser for uniform light distrubution.high efficiency driver electronics having efficiency > 85% and in compliance to iec standards.(integral driver). power consumption of 40 w/50w/60w, 3000/3300/4200 lumens, system lumen efficiency of 70 80 lm / watt output suitable for 2x36w ftl/ 2x36w cfl/3x36w cfl light fixtures, life time of 50000 burning hours with 70% intial lumens maintained. cct 3000° k, 4000° k and 6000° k. fixture shall be ce compliance. surface mounting 36w led light 2’x2’ with acrylic/ prismatic front cover 257 p & f energy efficient direct fit (retrofit) led tube system (with integral driver), on existing fixture. power consumption of18w / 36w 1500 3000 lumens, system lumen efficiency 80 lm/watt output, life time of 50,000 burning hours with 70% initial lumen maintained. cct 3000°k, 4000°k& 6000°k. 4 led tube shape fixture 18w. 258 p/ f ip 65/ ip 66 protected street light luminaries on existing bracket. fixture made from powder coated single piece pressure die cast aluminum housing with heat dissipation fins on housing with high power leds . diffuser / glass cover for ensuring ip 65 protection for lamp and control gear compartment, system lumen output of 100 lum/watt high power led. integrated driver shall be high efficiency having efficiency more than 85 % and in compliance to iec standards. system life of 50000 burning hours with 70 % of initial lumens maintained. fixture shall be in ce compliance. ip 65 protected led street light luminaries led street light fixture 150 watt 259 supply and erection of octagonal pole of following length and dimension as per table 3 with base plate on the cement concrete foundation of m 15 /m 20 grade (1:1.5:3) with the help of anchor bolts of grade 6.8 (is 1367 p iii ). the pole shall be made of s 355jo grade steel sheet , folded lengthwise to obtained octagonal shape, having single longitudinal seam weld and hot dipped galvanised internally & externally in accordance with is 2629. the pole shall have a weatherproof flush door and locking arrangements. the complete work shall be supervised and certified by the manufacturers for satisfactory supply, erection, testing and commissioning. 9 mtr. 260 supply, installation, testing and commissioning of copper wound transformers 33/0.433 kv, three phase, 50 hz, dyn 11, onan type , standard accessories with off load tap changer (+5% to 10% in steps of 2.5%), winding / top temperature rise of 45°c/40°c first fill oil, having permissible total loss values not exceeding 7.5% of the maximum total loss values for 11 kv as per energy efficiency level 2 at basic insulation level conferming to iss 2026 (part i to part ii), latest ammended and is 1180 part i : 2014. transformers described as above and as per the following continuous rating. 315kva 261 supply, installation, testing and commissiong of indoor type floor mounted metal clad, 11 kv incomer vcb panel up to 630 a equipped with following switchgears and accessories designed & tested as per latest standard i.e. iec 62271 200, suitable for stc 25ka/3 and iac a flr for 25ka/1sec. make of ht panel, vaccum interrupter and vcb should be of same make. 11 kv / 110 volts pt class 0.5 accuracy and 100 va burden with 1no. voltmeter (0 12 kv), analog type, selector switch for voltmeter and protection fuses/mcb for ht metering upto 12 kv on incomer, ammeter, analog type, selector switches for ammeters, microprocessor based numerical relay with o/l, e/f and s/c protection, set of dual core dual ratio 3cts of suitable ratio with sec 1 of 15 va burden and accuracy class – 0.5 for metering and class 5p10 for protection, multifunction meter. 262 sitc of dg set complete with 1500 rpm diesel engine of suitable bhp & ac brush less spdp alternator mounted on a common base frame & coupled through a flexible coupling or close coupled.alternator shall be self regulated with standard alternator protection( over voltage, over speed & under voltage). engine shall have residential silencer, up to 10 m exhaust piping , electronic / mechanical governor, manual & electric start, batteries, fuel tank ( with stand) & piping, control panel (16 g) with mccb (4p; 25 ka), ammeter, voltmeter, frequency meter, energy meter & hour meter, engine instruments panel, avm and with weatherproof, powder coated accoustic enclosure for dg set for sound attenuation fabricated from 1.6 mm crca sheet steel (structure) with side wall fabricated from 1.6 mm crca sheet and filled with foam as per cpcb norms latest amendments & is 8183 .the doors are fabricated from 1.6 mm crca sheet packed with accoustic material, floor of ms chequrred plate 5.0 mmthick, all doors/ opening are sealed with neoprene/ epdn gaskets. the enclosure has built in fuel tank, residential silencer (isolated from main dg chamber) with protection and tripping of dg set against temperature of more than 50 °c. all controls for operation of dg set are from outside the enclosure with dg control panel having microprocessor based genset monitoring and control system mccb ammeter, voltmeter, pf meter, frequency meter, kwh meter, ind. lamps etc. mounted inside enclosure , visible and accessible from outside. the enclosure should be suitable for following capacity dg sets and alternator. noise level is less than 75 db (a) at a distance of 1 mtrs. duly certified by authorized agency. complete in all respect of following capacity : radiator cooled and turbo charged 250 kva at 0.8 pf 415v 50hz 3 ?. 263 supply, installation, testing & commissioning of ht metering cubical panel as approved by discoms fabricated out of 14 swg crca sheet steel in two compartment & ms angle of size 60mmx6mm having provision for following: (i) provision for fixing trivector meter (to be supplied by discoms) (ii) provision for fixing of combined ct pt set (to be supplied by discoms) (iii)tt block (iv) 6mm bakelite sheet on all sides. 264 supply, installation, testing and commissioning of 11 kv double pole structure with air break switch having following specifications : (a) dp : double pole structure made of two nos. 9 meter long pcc poles (400 kg) & 7 nos. ms channel each of size 100 mmx50mmx2500mm complete with earthing of the structure as per rec standards in all respect with nuts, springs washers, clamps as required. (b) go:off load type gang operated 3 pole vertical flute type switch suitable for 11kv ; 400a ,3 phase, central post rotating double break isolator complete with ms hardware , copper moving & fixed contact ,assembly of 9 nos pin insulator ,gi pipe of suitable length for operation.c) do: 3 nos. horizontal/vertical mounted 33kv horn gap fuse set / drop out fuse set, 33kv barrel fuses mounted on 6 nos. post insulators. (c) do: 3nos vertical / horizontal mounted 11kv horn gap fuse set /drop out 11kv barrel fuses mounted on 6no pin insulators (d) la:3 piece non linear resistor type. lighting arrestor of approved make suitable for 3 wire, 11kv oh linewith rated voltage of 9kv rms & nominal discharge current rating of 5 ka & complete with galvanized clamping arrangement gi bolts, nuts, washer etc as required. (e) jumpers: 3 no 11kv acsr conductors mounted on pin type insularors as required. general:the go shall be operated by hand operated liver properly earthed with provision for locking mounted at 3’ 265 fire alarm g schedule 266 sitc of microprocessor based 2 wire loop (each loop accessing 90 addressable units ) fire alarm control panel. the panel shall be able to give pin point location of addressable units via the address code for each unit. the panel shall also be able to automatically switch off all control switches when ever any alarm is triggered. the panel shall also be able to give voice announcement to individualized speakers. the panel shall have built in sounder, maintenance free batteries of minimum 15 ah of 24 volts capable of minimum of 12 hours with battery charger, rectifier. loop cards, lcd unit to indicate fire / fault signal of individual unit, built in built / external printer, to log all incoming data etc complete in all respect. 2 loop. 267 sitc manual call point complete with , glass, hammer and chain etc as required: analogue addressable type 268 sitc automatic commendable control switches for shutting downac plant, power supply, gas supply etc. response indicators. 269 sitc fault isolators for isolating shorted, dead wire and loose circuits between two successive fault isolators with automatic resetting arrangement. analogue addressable type. 270 fire fighting g schedule 271 sub head i (wet riser system pumping equipments)sitc of electric driven sprinkler / hydrant pump suitable for automatic operation consisting of the following (a) horizontal multi stage centrifugal suction type pump complete for delivery of below mentioned discharge complete with necessary sluice value on the suction side ( all items to be matching the suction side of the pump) and pressure gauge sluice value and non return valve on the delivery side side ( all of the necessary dia) and including bypass arrangement for testing of pump.(b) squirrel cage induction motor suitable for 415 v, 50 hz, ac supply of below mentioned hp for the above pump ,1450 rpm t.e.f.c confirming to ip:55 and flexible coupling and coupling guard with the pump. (c) common bed plate fabricated from mild steel channel or cast iron type1620 lpm at 70 mtr head ( 50 hp motor) 272 sitc of diesel engine drive standby pump suitable for automatic operation consisting of the following a, b, c. .the diesel driven pump shall be suitable for following discharge:(a) horizontal multi stage centrifugal suction type pump complete for delivery of below mentioned discharge complete with necessary flexible pipe, sluice value on the suction side (all items shall be matching the suction side of the pump) and pressure gauge, sluice valve and non return valve on the delivery side (all of the necessary dia) and including bypass arrangement for testing of pump.(b) water cooled diesel engine developing suitable bhp for the below mentioned discharge at 1800 rpm, flexible coupling and coupling guard with the pump, common bed plate for mounting of the engine and pump, d cushy foot, damping arrangement by cushy foot, diesel engine starting panel for starting of the engine automatically with a unit of battery of 12/24v, 88 ah, 13/21 plate, exhaust pipe of minimum 10 m length, with muffler, day oil tank of 300 1ts capacity with first charge and hand operated oil pumpingset, supply, installation, testing, & commissioning of electric driven automatic pressurization pump setc) horizontally mounted single stage centrifugal end delivery pump of below mentioned discharge with necessary sluice valve on the suction side (all items matching the suction side of the pump) and sluice valve, non return value, pressure gauge on the delivery side including by pass arrangement for testing of the working of the pumping set as required.1620 lpm at 70 mtr head ( 50 hp engine) 273 sitc of jockey pump having squirrel cage induction motor suitable for 415 v, 50 hz ac supply with synchronous speed of 2900 rpm t.e.f.c type confirming to ip:55 and flexible coupling and coupling guard with the pump ,common bed plate of fabricated mild steel channel or cast iron type. 180 lpm at 70 mtr (15 hp). 274 supplying & installing cylindrical type air vessel, 250 mm dia 1.5m high of thickness 6.0 mm m.s. complete with air release valve, safety valve, pressure gauge etc.along with two coats of red oxide and two coat of post office red enamel paint as required. 275 providing & fixing 100mm dia pressure gauge on pump deliveryline complete with shut off cock. 276 sitc of pressure switches for main, jockey, and standby pumps,including necessary wiring upto control panel and stop valve. 277 sub head ii (hydrants system) 278 providing and fixing single headed hydrant valves with flanged inletisi marked with 63 mm female instantaneous outlet of gun metalcomplete with blank cap and chain conforming to is : 5290 279 providing . 63 mm dia 15 m long reinforced rubber hose pipeconforming to is : 636 1962, part –a & isi marked with gun metalmale & female coupling wire wound with the pipe. 280 providing & fixing (1.0 m x .45 m x 0.6 m ) outdoor hosecabinet suitable for accommodating hydrants made of not lessthan 16 swg. m. s. sheet having central opening glazed doorincluding necessary locking arrangement, painting (one coat primer& two coats of paint ) and housing 2 nos. rrl hose pipe, 1 nobranch pipe. 281 providing and fixing swinging drum type hose reel isi marked 30m(l) x 20 mm (dia) rubber lined pipe with shut off nozzle of 6 mm diaincluding the cost of 25 mm dia pipe connection from riser to hosereel , all sockets, nipples, elbows and 25 mm globe valve. 282 providing and fixing isi marked three way fire brigade inlet to wetriser with non return valve complete in all respects 283 providing, fixing, jointing and testing of heavy gauge (c class ) mspipe isi marked with accessories like tees, elbows, flanged joints,reducers, compressed asbestos gaskets, nuts and bolts includingfixing the pipe with suitable flat iron strip clamps /bracket, paintingetc. complete as required for delivery/ suction manifold relating tothe pump including painting of two coats of red oxide and two coatof post office red enamel paint including all civil breakages andmaking good the same : 284 200mm dia 285 150 mm dia 286 80 mm dia 287 sub head iii (piping, valves and accessories) 288 ms (medium duty b class) pipe with cleaning,wrapping and coatingof the pipe as per is; 10221 in all kind of soil at 1.0 m depthincluding excavation as required. 289 150 mm dia 290 100 mm dia 291 80 mm dia 292 providing & fixing butterfly valve with cast iron body, cast iron discand seat of nitrile rubber bonded on bakelite with hard back to pn1.6 rating with following sizes complete with bolts, washers andcompressed asbestos gasket as required 293 150 mm dia 294 100 mm dia 295 80 mm dia 296 providing and fixing non return valve complete with bolts nuts washers and compressed asbestos gasket etc as required : 297 200 mm dia 298 150 mm dia 299 80 mm dia 300 carbon dioxide type fire extinguisher with cylinder fully charge of 4.5kg capacity. 301 providing, fixing, testing & commissioning of sprinkler heads of thefollowing type : pendant type with quartziod bulb, operating temperature at 68 deg cas per specifications. 302 providing & fixing 10 swg chrome plated brass 100 mm diadecorative flanges / escutcheon plates to be fixed at junction ofsprinkler piping with the false ceiling. 303 sub head iii (piping, valves and accessories) 304 sub head iv (fire electrical control panel) 305 supplying and making end termination with heavy copper lugs (pin/ring type) duty crimped with crimping tool, pvc tape etc of followingsize 306 1.5 sq.mm 307 10.0 sq.mm 308 35.0 sq.mm 309 supply, fabricating & installing following sizes of perforated cable trays including horizontal and vertical bends, reducers tees,cross members and other accessories as required and duly suspended from the ceiling with suspenders and including painting as required. 100mm x 50mm x 1.6mm 310 boundary wall g schedule 311 earth work in excavation in foundation, trenches etc. including dressing of sides and ramming of bottoms, including getting out the excavated material, refilling after laying pipe/ foundation and disposal of surplus excavated material at a lead upto 50m suitable site as per direction of engineer for following depths, below natural ground / road top level. in all types soils/ saturated soil such as moorum, sand, sandy silt, clay, black cotton soil, kankar, etc. depth upto 1.5 m 312 excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. 313 providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering all work upto plinth level : 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). 314 providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement all work upto plinth level : 1:1:2 (1 cement : 1 coarse sand : 2 graded stone aggregate 20 mm nominal size). (as per design mix) 315 reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto two stories excluding the cost of centring, shuttering, finishing and reinforcement: m 30 grade concrete. 316 centring and shuttering with plywood or steel sheet upto two stories or height upto 7.5 metre above plinth level including strutting, propping etc. and removal of form for foundations, footings, bases of columns, etc. for mass concrete. 317 lintels, beams, plinth beams, girders, bressumers and cantilevers. 318 reinforcement for r.c.c. work at all levels including straightening, cutting, bending, placing in position and binding all complete. thermo mechanically treated bars 319 pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) : raised and cut pointing. 320 random rubble stone masonry work in cement mortar with mechanical mixer in foundation (at any level) complete as per drawing and technical specification and as per clause 1000 and 1400 of mort&h specification including all scaffolding material, labour, machinery but excluding pointing and plastering. in cement mortar 1:4 (1 cement : 4 coarse sand) 321 structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete: 322 earth work 323 dressing of earth work in surface excavation including cutting and filling upto 30cm depth including disposal of excavated earth upto 50m and lift upto 1.5 m. 324 earth work in excavation in open area, stp, wtp, pumping station with mechanical means including dressing of sides and ramming of bottoms, including getting out the excavated material, disposal of excavated material lead upto 1000m at suitable site as per as per drawing and as per direction of engineer. (measurements for payment to be done as per standard drawings). in all type of soil upto 3.0 m depth. 325 external development 326 compacting original ground 327 loosening upto a level of 500 mm below the subgrade level watered, graded and compacted in layers by vibratory roller 8 10 tonne to meet requirement of table 300 2 for subgrade construction as per mort&h specification clause 305.3.4. 328 loosening and recompacting original ground below embankment including loosening leveling and recompacting original ground supporting embankment to facilitate placement of of first layer of embankment, scarified to a depth of 150 mm, mixed with water at omc and then compacted by rolling by vibratory roller 8 10 tonne so as to achieve minimum dry density as given in table 300 2 for embankment construction as per mort&h specification clause 305.3.4. 329 providing, laying, spreading (with paver finisher only) and compacting wet mix macadam (wmm) base course comprising of graded stone aggregate and granular material conforming to mort&h specifications (table 400 ii) in layers of equal compacted thickness each consolidated, including pre mixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tippers to site, laying in uniform layers in base course on a well prepared sub base/ base course and compacting with power vibratory roller to achieve the desired density complete as per mort&h specification clause 406 including all material, labour, machinery, lighting, guarding and maintenance of diversion. 330 cement concrete pavements 331 providing and laying lean cement concrete 1:4:8 in sub base over a prepared sub grade with coarse and fine aggregate conforming to is: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600 1, cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in a batching plant, transported to site, laid manualy, compacting with surface vibrator, finishing and curing complete as per clause 601, 112 of mort&h specification including all material, labour, machinery, lighting, guarding and maintenance of diversion. 332 providing and laying un reinforced, dowel jointed, plain cement concrete mix with concrete mixer & vibrator pavement over a prepared sub base with 43 grade cement , coarse and fine aggregate conforming to is: 383, maximum size of coarse aggregate not exceeding 25 mm, mixed as per approved mix design, laid, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, admixtures (if required) as approved, curing compound, finishing to lines and grades complete as per drawing and as per clause 602, 112 of mort&h specification including all material, labour, machinery, lighting, guarding and maintenance of diversion. pcc m 30. 333 providing and laying cast in situ cement concrete m 20 grade kerb stone channel top and bottom width 115 and 165 mm respectively, 250mm high laid with kerb laying machine, on 150 mm thick pcc m10 grade foundation (laid manually) as per design, including fixing at site as per clause 408 of mort&h specification including all material, labour, machinery, lighting, guarding and maintenance of diversion. using concrete mixer. 334 providing and fixing of 60mm thick precast cement concrete interlocking paver block casted with rubber moulds in approved reflective colour and design having minimun compressive strength of 300 kg/ sq cm. the cc paving blocks be laid on average 50mm thick bed of coarse sand and the joint is to be filled with fine sand. laying procedure on compacted sub base as defined. complete job is to be executed as per the instruction of engineer incharge. the rates to be inclusive of all lead & lifts etc. complete as per specifications. 335 flooring with cobble stone of approx. size 125x125x75 mm (thick) laid on 25 mm average thick cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the stone, laid in approved pattern complete in all respect as per direction of engineer in charge. 336 providing at site, lowering & laying in trenches, aligning & jointing of rcc pipes np4 class (with s/s ends) is: 458 2003 (amended up to date) marked and pipes from 300 mm and upto 1800 mm manufactured through vertical casting process at all depths with rubber gaskets (epdm/sbr) for sewer lines as per is: 5382 (including cost of rubber gaskets, lubricants) as per drawing, sectional hydro testing of the sewer pipe line (including cost and conveyance of water to site for testing) etc., complete as per specification and / or as directed by engineer. note : e/w to be measured and paid separately. 300 mm internal diameter. 337 horticulture work 338 grassing with doobs grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from weeds and fit for moving including supplying good earth if needed. in rows 7.5 cm apart in either direction. 339 supply and planting following in poly bags / earthen pots well branched, well established & free from disease of 900 mm min. height plants at site in 0.60 m dia holes, 1 m deep dug in the ground, mixing the soil with decayed farm yard/sludge manure, backfilling the hole watering etc as required. 340 ficus panda 341 tecoma capensis ( ratanjot) 342 clerodendron inermii ( choti aari) 343 tabernaemontana variegated ( chandni) 344 hamelia patens ( firebush, thal kamal) 345 hibiscus variegated ( guddal) 346 supply and planting following in poly bags / earthen pots well branched, well established & free from disease of 300 mm min. height ground covers at site in 0.3 m dia holes, 0.3 m deep dug in the ground, mixing the soil with decayed farm yard/sludge manure, backfilling the hole watering etc as required. 347 wedelia trilobata ( sunflower family) 348 alternathera green (parrot leaf) 349 iresine herbstii (blood leaf) 350 ophiopogon black ( lily turf, mondograss) 351 asparagus myerii (fox tail) 352 lantana sellowiana 353 rhoeo spathacea compacta‘ ( oyster, boat lily) 354 golden duranta 355 pennisetum setaceum (fountain grass) ...

Due Date : May 02, 2022

Tender Value : ₹ 14.99 Crore

View Tender
23
Urban Improvement Trust - Rajasthan

31756519 miscellaneous electrical work in art hill at city park ( oxyzone ) , kota electrical works information display 2 sitc of infomation kiosk having following specifications : floor standing kiosk enclosure in 1.5 mm mild steel with powder coated finish. space and provision for mounting 55 touch screen monitor, 6mm toughened glass,dual core celeron processor(industrial grade)space for cpu ,pcap touch ,provision of two service doors with security locks, spike guard,cooling fan .with 55 professional monitor with multi touch capacitive glass,native contrast 5000:1 brightness 3500 nits or better , cortex a72 quad core,ip56.display andwindows 10 professional os license,industiral weather controller having 1. temperature 2. wind speed 3. co2 4. humidity5. rainfall any other software required for the designated purpose and installation at site. complete in all respect including required accessories for installation.makes: sony/samsung/lg 3 mobile charging unit 4 sitc of mobile charging uinit having following specifications : ms metal enclosure with powder coating finish with the provision of charing the phone by mobile charger and usb without any security lock 1×1×5 size,12 charging point with fast charging, control auto cutoff system, back lit for branding.. complete in all respect including required accessories for installation. 5 led vedio wall 6 sitc of outdoor led display –display size (w x h) led display of 2.88 mtr. x 1.92 mtr., pixel pitch 6 mm±5% or better, led configuration rgb 3 in 1 smd,led lamp gold wired led lamp ,pixel densityminimum 14400pixels per sqm or higher half gain horizontal / vertical viewing angle h 140 deg / v 90 deg or better ,refresh rate >1920 hz or better temp range 20to +50 degrees c or better grey scale processing 14 bit or better colours 4.4 trillion colours brightness5000 cd/m² or better maximum power consumption 900 w/sqmor lower dimming capability 255 levels power input 100 ~ 240 vac contrast ratio 3000:1 or better access for maintenance front ip level front : ip65 , rear : ip 65 led tile/ cabinet calibrationled tiles/cabinets should be calibrated before being supplied. these screens should also be calibrated after the installation to ensure brightness uniformity. calibration should also be performed as and when it is required during the warranty period. offered product which does not support dot calibration shall be rejected brightness measurement tool emitted brightness measurement tool namely a luminance meter (which can provide direct brightness reading in cd/m²) for brightness measurement of offered led screen. oem of led display should provide details (model no. & date of purchase) of the luminance meter available with them in india along with its latest calibration certificate. the same instrument shall be used to check the minimum brightness levels as offered in the bid. please note illuminance meters are not acceptable as they are not for measuring emitted light international safety certifications( mandatory to submit along with the bid) bis registration (bureau of indian standards) as per standard: is 13252 ( part 1) :2010. offered model bis certificate should be on oem brand and their own manufacturing unit in india. valid bis certificate to be provided for the offered led tiles/cabinets.bis certificate for led module only shall not be considered as valid bis certificate for the product. the offered model should be clearly mentioned in the bis certificate. this certificate shall be submitted at the time of bid. quality/health & safety/environmental certifications of oem/oem subsidiary in india( copy to be submitted along with the bid quality management system 9001:2015 ,occupation health & safety management system ohsas 18001:2007 environmental management system14001: 2015 7 power distribution unit front door 2 hinges with rack wall mount clamp welded on rack frame rear side19 pillar front & 19 pillar rear bolted on rack side wall locking arrangement to be provided with a locking systemlimit switch the rack door to be provided with a limit switch earthing earthing studs should be provided in the rack for earthing purposes cable points cable entry and exit points should be provided in the rack mounting should be possible to mount the rack either on a pole or on a wall with options of different mounting typesmaterial gi 120 gsm thickness 1.5 mm ip rating ip54 ac input 380v/220v ac power load max as per led power requirement surge protectionclass c over temperature protection selectable from 30 deg to 60 deg c refrigerant r134a for harsh conditions anti theft should be mounted in an ant theft designsurface treatment outdoor type power coating display panel should be provided with a display panel to show parameters like cabinet temperature, indications for cooling, running of external fans, flashing on alarmapproved brand:daktronics/delta /mitsubishi /nec 8 led control systemcontrol port rs232/ lan signal interface1x hdmi, 1x dp1.2connectivity to displayrj45 minimum load capacity should be able to support the offered led screenapproved brandbarco/daktronics/delta /mitsubishi /nec 9 multi media & content management system api signage solution should provide an open software apirs 232 interface for controlling other equipment power consumption < 15 w power over ethernet poe should be supported by the device for redundancy purposes power supply 100~240 v ac network connectivity wifi: 802.11 ac (2.4 ghz & 5 ghz) & ethernet : 1 gbpsstorage minimum internal storage 16 gb output ports 1 x hdmi, 1 x audio output,input ports 1 x hdmi, 1 x line input, 1 x usb 2.0 ( type a), micro sd card slot, rj45 with poe, rs 232, 1 x usb 2.0 ( type c) minimum media formats supported images: jpeg, png, bmp: video: mp2, mp4, 3gp, avi, mov, wmv: audio : mp3, wmv, aac output orientation landscape or portraitdisplay resolutionsshould support up to 4k uhd cloud service for remote device and content management over the internetsecurity kensington security slot to be present in the device, dual network wifi & lan plug and play for east setup and auto device discovery screen mirroring should support screen mirroring for ios and android,nt live sender and receiver for wireless mirroringcontent support webpages, twitter, rss, google calendar, weather as a minimum security aes 256 encryption enhanced hardware capability airplay: discovery over bluetooth, 5ghz wifi hotspot wifi 802.11ac, b/g/n, 2.4ghz & 5ghz, 2t2r with 2 external antenna dual wifi modules byod supported windows, mac, ubuntu 18.04 & above, ios 11 & above, android 5.0 & aboveannotation should be supported signage & content manager (software & hardware) to be able to create playlists and send them over the network to media players or more for playout based on schedule and sequencing. this software to be loaded on suitable hardware to be supplied by the vendor. 10 playlist automation flexible scheduling based on day, date and time; playlist scheduling; content distribution should be done using oem cloud setup. cloud licence should be provided for three years minimum content management synchronize media content automatically from remote storage dropbox, ftp, etc.solution compatibilitycomplete solution( led display , led control system , multimedia & content management system )should be from same oem/ brand to avoid the compatibility issue at the later stageapproved makebarco/ delta / mitsubishi /daktronics/nec 11 mechanical structure for mounting of led wallmounting structure led wall should be mounted on building façade /customized structure. structure should be earthed properly and provided.material should be made from mild steel and painted black along with antirust coating. 12 auto brightness sensor rated voltage 5v ,operating temperature 30?~70? ,operating humidity 0~99% ,brightness range 0~65535 lux ,cable 5m ,features • monitor the ambient brightness to achieve automatic brightness adjustment of led display • asynchronous • outdoor use proofing• no external power supply required 13 scope for installation complete supply, installation, configuration, testing and commissioning of all the delivered equipment with necessary cables and accessories 14 structuresupply and provindingbrackets as outdoor wall mounted/unipol, front maintenance led wall , structure installation, structure painting, led mounting brackets, led mounting hardware , led screen outer border(acp sheet border) with connectivity as per oem drawing. 15 oem criteria 1.oem should have installed at least 100 outdoor led display based on smd technology only (dip technology is not acceptable) with at least 10 sqm area or higher connected in single network and content published from a central location in india for any psu/ government. these displays should be working satisfactorily for at least 3 years before the date of rfp. customer stratification letter to be submitted along with the bid.2. oem/oem subsidiary should be present in india for at least last 5 years with their own registered & service center managed by their own engineers. details to be provided along with customer confirmation. 3. oem should have bis certification of offered product on their own manufacturing unit details in india. 4. oem indian subsidiary/indian oem should have its own service center with at least 5 service engineers on their rolls.5. at least five or more outdoor led display wall with min 10 sqm or highershould be in working condition for minimum four years at the time of bid submission in kota district and out of five installation at least two displays installations should be in kota city . 16 audio system art hill 17 supply, installation, testing and commissioning of 2 way ip55 rated (as per iec 529) indoor/outdoor surface mounted music loudspeaker. the louspeaker shall meet the following performance criteria: usable frequency range ( 10db) of 65hz to 20khz; power handling of 200watt peak; nominal dispersion of130°(h) × 130°(v); sensitivity of 87 db spl and max spl of 110 db spl peak; nominal impedance of 8 ohms with an integral multi tap transformer with selectable tap settings of 6/12/25/50w@100v or better. the loudspeaker system shall be comprised of a powder coated aluminum grill; 5.25 inch weather treated woofer and 1 inch neodymium dome tweeter coaxially mounted enclosed in engineered plastics with an in built waveguide designed to provide uniform area coverage across the loudspeakers frequency range. ul 1480a rated. makes: biamp/bose/tw audioand other equivalent make maching with above specification and make is to be approved by department.complete in all respect with required accessories. 18 supply, installation, testing and commissioning ofclass d amplifier with2x1000 wload independent outputs deliver full channel power to either low impedance (4 8 o) or high impedance (70/100v) loads without bridging .amplifier shall havefrequency response of 20 hz to 20 khz (+/ 1 db) for lz mode,with thd+n at rated power less than 0.04%.the amplifier shall meet or exceed the following performance specifications: channel separation (crosstalk) greater than 80 db below rated power at 1 khz..the amplifier shall have2 line level inputs with selectable input sensitivity settings ( 10 dbv, 4 dbu and 14 dbu)for balanced line level inputs (6 pin euroblock connector) andpossiblity of4or more no .ofdigital audio channels. the amplifier shall offer a master mute connection for use with external dry contacts, normally open or normally closed, to mute all outputs of the amplifier.makes qsc/bose/lab gruppen and other equivalent make maching with above specification and make is to be approved by department.complete in all respect with required accessories. 19 supply, installation, testing and commissioning of integrateddigital soundprocessor with following functionalities and specifications;signal processor shall be cpu 32 bit fixed/floating point dsp + arm, 456 mhz.the dsp shall have8 mic/line inputs & 8 analog outputs, 8 additonal digital outputs; 24 bit a d and d a convertors; sampling rate : 48 khz;thd : < 0.002 % ; channel separation (crosstalk) : < 105 db ; frequency response 20 hz 20 khz ; dynamic range :> 115 db; 5 control inputs and outputs; rs 232 and ethernet port for third party control and monitoring;inbuilt dsp features like automatic mic mixing, multiband graphic and parametric eqs,signal generators, routers, mixers, agcs, duckers, gates, compressors, source selectors, and delays. etc. makes symetrix/bose/lab gruppenand other equivalent make maching with above specification and make is to be approved by department.complete in all respect with required accessories. 20 supply, installation, testing and commissioning of professional multisource cd/usb/sd card music player with unbalanced outputs 2 x rca + combi rca, integrated fm rds and tuner with rs232 control, ir remote included, rack mountable makes: apart /symetrix /ashly audio and other equivalent make maching with above specification and make is to be approved by department.complete in all respect with required accessories. 21 p/laying p.v.c./ xlpe insulated & p.v.c. sheathed cable of 1.1 kv grade with copper conductor of is:1554 p i / is :7098 p i of group 1 of approved makein ground as per is:1255 including excavation of 30cmx75cm size trench, 25 cm thick underlayer ofsand,iind class bricks covering, refilling earth,compaction of earth, making necessary connection, testing etc. as required of size. group 1 22 2 core *1.5 sqmm 23 supply , installation, testing and comissioning of wall mounted communication rack with glass doors, handles ,lock , top and bottom cable entries, supports for mounting rack on wall , cable managers, one fan, equipment mounting hardware, power supply box for supplying power to switches, fans etc along with earth continuity kit, mcb, indicator, moulded power supply cable group 1 24 12 u(44 mm ) wall mounted 25 internal wiring 26 wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv gradeand 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) ofapproved make in surface / recessed isi marked medium duty pvc conduit & its accessories, round tiles,hot dipped galvanized modular box of 20 swg with earth terminal, 6 a modular switch,modular plate with grid plate,screws,making connections, testing etc. as required. group 1 27 short point (up to 3 mtr.) 28 medium point (up to 6 mtr.) 29 long point(up to 10 mtr..) 30 wiring of twin control light point with 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv gradeand 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) of approved make in surface / recessed isi marked medium duty pvc conduit & its accessories, round tles, hot dipped galvanized m.s modularbox of 20 swg with earth terminal,6 a two way modular switch, modular plate with grid plate,screws,making connections, testing etc. as required. group 1 31 medium point (up to 6 mtr.) 32 long point(up to 10 mtr..) 33 wiring of 3 pin 6 amp. light plug point with 1.5 sq. mm nominal sizefr pvc insulated unsheathed flexible copper conductor 1.1 kv gradeand 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade(is:694) of approved makein surface / recessed isi marked medium duty pvc conduit & its accessories, hot dipped galvanized m.s modular box of 20 swg with earth terminal, 6 a modularswitch, 6 a modular socket, modular plate with grid plate, screws, making connections, testing etc. as required.group 1 34 on board 35 long point(up to 10 mtr..) 36 s & f following sizes ( dia.) of isi marked medium duty pvcconduit along with accessories in surface / recessed using saddles, clamps, fastener , as required including cutting the wall and making good the same as required. group 1 37 25mm 38 supplying and drawing fr pvc insulated & unsheathed flexible copper cunductor isi marked (is:694)of 1.1 kv grade and approved make in existing surface or recessed conduit/ casing capping including making connections etc. as required. group 1 39 1x4.0 sq. mm 40 1x2.5 sqmm 41 supplying and fixing of power plug poing modular accessories on hot dipped galvanized modular on surface or in recessed with suitable size of grid plate with cover plate including cost of modular 16 amp. switch and socket outlet . making connection testing etc. as required. group 1 42 p & f 240/415 v ac mcb with positive isolation of breaking capacity not less than 10 ka (b/c/d tripping characteristics) isi marked 8828(1996)/conforming to iec 60898 in existing board/ sheets including making connections, testing etc. as required. group 1 43 6 a to 32 a rating 44 p & f 240/415 v isolator conforming to is:13947 iii/iec 60947 3 on existing board/ sheet including making connections,testing etc. as required. group 1four pole isolator 45 63 a rating 46 p & f recessed / surface mounting heavy duty horizontal type sheet steel distribution board phophatised/powder painted complete with suitable rating insulated copper bus bar, shorting link, neutral link, earth link, and din bar, masking sheet, conforming to is13032 & is8623 including making internal db terminations with copper lugs testing etc. as required. group 1 47 double door three phase 4 way 48 double door three phase 6 way 49 double door three phase 8 way 50 double door three phase 12 way 51 p & fflushsurface type enclosoure for housing mcb/isolator with din rail including making connections with lugs repairs etc as required with sheet steel enclosuretwo way 52 p & f following modular acessories made out of unbreakable and fire retardant poly carbonate with silver contacts including making connections testing etc. as required. group 1 53 5 step fan regulator 2 module 54 p & f of heavy duty capacitor start, double ball bearing 900/1400 rpm single phase isi marked exhaust fan, is: 2312 marked in existing opening including making connections testing etc. as required. group 1 55 300 mm sweep (900/17400 rpm) 56 p & f of capacitor start, metal body, metal blade three speed wall mounting fan of following sweep with the help of anchor bolts including making connection testing etc. as required. 57 400 mm sweep (oscillating type) 58 p & f extra downroad of 15 mm dia. erw of 1.6 mm nominal thick medium duty steel pipe including cutting threading drilling fixing quarter pin etc .as required. 59 p & f of gravity louver shutter of superior quality made out of frame of 18 swg m.s. sheet and louvers made from 24 swg m.s. sheet with enamal paint including cost of nuts and bolts etc .as required. 60 upto 380 mm size 61 p & f is:371 marked 6 a surface type ceiling rose including making connection testing etc. as required. 62 p & f isi marked 6 a bakelite batten/ angle holder including making connection testing as required. 63 sitc of air cooled splittype air conditioners complete with indoor unit (idu), out door unit (odu), surface / concealed copper refrigerant piping with insulation (ep foam pipe section) upto 3.0 mtr (idu to odu), copper power cable upto 4.0mtr(idu to odu) r 22/r 410 refrigerant, remote, drain pump suitable for 400/230v+10% of 50hz, 1/3 phase. ac supply capable of performing cooling, dehumidification, air circulation of following capacity with scroll/reciprocating /rotary compressor as specified.group 1hi wall/ ceiling : wall split 64 1.50tr with 5 star rating of bee 65 floor standing(tower type)3.0 tr 66 p&f of 18swg m.s. recessed fan box hexagonal/round of size 130mm dia depth 75mm, 12mm dia rod fan hook with 100mm length extended on each side. 67 p&f of follwing modular accessories made out of unbreakable fire retardant poly carbonate with silver contacts including making connections testing etc as required. 68 rj 11 telephone jack single two line 69 rj 45 computer jack with shutter 70 t.v coaxial socket 71 sitc of self contained drinking water cooler with energy efficient hermetic sealed type compressor, non cfc refrigerant suitable for operation on230v/1ph/50hz ac supply, full stainless steel [s304)body and tank, stainless steel water tray, minimum two nos faucets and suitable drainage system complete in all respect with 300mm height ms fabricated and painted plateform. complete in all respect of the following capacity 72 cooling capacity 150 ltr./hr. and storage capacity 150 ltrs 73 sitc of ro water system with filtration stage = particilate filter membrane life enhancer filter sediment filter pre carbon filter ro membrane filter post carbon filter, input power rating 230 v ac , 50 hz, percentage of rejection tds 90% or better having following features (a) double purification by ro with ess or latest technology with tds indicator.(b) spin welded ro membrane housing to prevent tempering. (c) push fit components for leak proof performance (d) fully automatic operation with auto start and auto off. (e)ss/abs construction for corrosion free lifespan. (f) equally suitable for water from all bore wells, overhead storage tanks, water tankers and even municipal taps.(g) ro membrane flushing auto flush @ every start, every stop and every one hour of working for one minute. complete in all respect with following capacity group 1 74 purification capacity 50 lph, duty cycle 270 500 liters/dav 75 p & f of ip20 surface/recess mounted led downlight made of pressure diecast aluminium housing, with heat sink and good quality reflector, high efficiency external driver, power consumption 14/15 watt, system lumen efficiency >80 lumen/watt. cct 6000k (minimum) k, cri >80, pf >0.9 life time 50,000 burnins hours.group1 76 p & f of 36 watt ip 20 led 2x2 fixture, recessed / surface type, having efficacy of not less than 100 lumen / watt, made out from crca housing and with high purity /transmisvity duffuser for uniform light distribution high efficiency driver electronics and in compliance to iec standard (integral with light fixture), life time of more than50000 burning hours, cct 6000k (minimum), cri>80 driver maintaining pf>0.9 group 1 77 p & f of ip 20 led tube light 20 watt with external batten made from crca sheet steel suitable to replace t 8/t 12 tube light, integral driver, 2000 luman + 5% tolerarrce system luman efficiacy of 100 lm/ watt minimum expected life time of 25000 burning hours, cct 5700 k ansi, cri 80, driver efficiency >85%, life expectancy of driver rnin 30000 hrs. pf 0,95 at full load/ 230 volt ac. group 1 78 p & f 1200mm sweep bee 5 star rated double ball bearing capacitor start, aluminium body & blade ceiling fan complying to is 374:l979, i/p 50 watt at max speed & 230 volt, air delivery > 210 cmm, speed > 330 rpm with down rod upto 30 cm with 3 x 1.5 sqmm pvc insulated flexible copper conductor making connection testing etc as required group 1 79 sitc of interconnecting refrigerantpipe work withclosed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor units as per specifications including chase cutting, supports etc. as required. 80 6.35 mm 1/4 81 12.7 mm 1/2 82 15.88 mm 5/8 83 19.05 mm 3/4 84 s & f of rigid cpvc (25mm) drain piping of 6 kg/ cm2 with 6mm thick nitrile rubber insulation. 85 s & f of hard rigid pvc (20/25mm) drain piping with 6mm thick nitrile rubber insulation. 86 s & f of fr pvc insulated & sheathed 3 core flexible copper conductor isi marked (is:694) of 1.1 kv grade of following rating: 87 4.0 sq.mm 88 6.0 sq.mm 89 p & f of 0.38 mm thick aluminium sheet cladding on eisting refrigerant copper pipe /insulated chiller pipe or any other surface suitable for suction and discharge line complete as required. 90 sitc of auto main failure (amf) panel fabricated from crca sheet steel 2 mmthick , powder coated finish , engine start & stopcommands, control relays , selector switches for ammeter & voltmeter, ammeter & voltmeter , control & power contactors, timers, electronic hooter ,visual & alarm indication for faults, ups, operator interface panel complete in all respect suitable for following capacity dg sets:plc based: 91 50 to 63.5 kva 92 sitc of silent dg set (as per latest cpcbemission norms) complete with 1500 rpm diesel engine of suitable bhp & ac brush less spdp alternator mounted on a common base frame & coupled through a flexible coupling or close coupled. alternator shall be self regulated with standard alternator protection( over voltage, over speed & under voltage, under speed warning & shutdown). engine shall have residential silencer (isolated from main dg chamber), up to 3 m exhaust piping (with insulation & cladding), electronic governor, manual & electric start ,batteries, engine instruments panel, avm and with weatherproof, powder coated accoustic enclosure for dg set for sound attenuation fabricated from 1.6 mmcrcasheet steel (structure) with side wall fabricated from 1.6 mm crcasheet & filled with 100mm thick glass wool (96kg/m3)/foam. as per is 8183 the doors of 100 mm thick and fabricated from 1.6mm crca sheet packed with accoustic material, all doors/ opening are sealed with neoprene/epdn gaskets. 93 the enclosure has built in fuel tank, with protection and tripping of dgset against temperature of more than 50 degree centigrade. all controls for operation of dg set are from outside the enclosure with dg control panel having microprocessor based genset monitoring & control system, mccb/acb of suitable rating, ammeter, voltmeter, pf meter, frequency meter, kwh meter, ind.lamps etc. mounted inside enclosure , visible and accessible from outside. the enclosure should be suitable for following capacity dg sets and alternator. noise level shall be less than 75 dba at a distance of 1 mtrs. duly certified by authorised agency etc. complete in all respect of following capacity: 94 62.5 kva at 0.8 pf 415v 50hz 3 ø group 1 95 providing, fixing, jointing, testing & commissioning of medium duty ms b class pipes conforming to is3589 / 1239 part t for dg exhaust applications including cutting, welding etc & fittings like elbows,flanges, tapers, reducer, gaskets etc. fixing the pipe on the wall/ceiling with suitable clamps, hanger and nuts bolts. including the cost of thermal insulation with 50 mm thick layers of lrb rock wool (64 kg/m3 density) & 24 swg aluminium sheet c1addings etc complete as required. 96 150 mm dia 97 supply , installation testing and commissioning of cascading pump with auto level sensor having following specifications flow 186700l/h,head 10.08 m,efficiency 80.9%,moter efficiency class :ie 3,pump housing : cast iron,impeller :stainless steel(ss 304),seal :mechnical seal,moor kw :7.5 hp,rpm/pole1460/4,with auto level sensor make:grundfos and other equivalant make maching with above specification.and make is to be approved by department. 98 run ,operation ,maintanance and security for complete audio system,mobile charging unit,information display system,led vedio wall system , air conditioning system,watercooler/ r.o.system and dg setat art hill/ city park (oxyzone) ( including all accessories installed by contractor) with material of make of approved company used in initial installationfor round the clock with skilled and sufficient man power including replacing any of all damage parts and running satisfactory in all respect ...

Due Date : April 18, 2022

Tender Value : ₹ 1.96 Crore

View Tender
28
West Central Railway - Rajasthan

29805197 supply of indication inside boardindication inside board,indication inside board written on retro sheet and pasting on 03 mm acp sheet withlamination & stopper board size 10%u2019%u2019x8%u2019%u2019 with stopper j type length %u2013144 mm back side strip 100 mm, j type bend 40 mm, middle gap of both strip 4 mm, width 25 mm ,thickness 3 mm aluminium sheet and joint bracket length 135 mm, both side 50 mm with both side eye 4mm, inside strip width 25 mm, thickness 3 mm, both side bracket center 02 hole 4 mm %u2013 as perjustification (manufacturing item) *be sure to check the oem certificate & sample pass certificate bysse/c&w/rm/kota when delivering to the firm. => limited...

Due Date : November 24, 2021

Tender Value : ₹ Ref. Documents

View Tender
29
Indian Army - Rajasthan

29791339 bids are invited for gi nipple 20x100mm gi nipple 20x100mm , gi nipple 40x100mm gi nipple 40x100mm , gi nipple 40x150mm gi nipple 40x150mm , gi nipple 50x100mm gi nipple 50x100mm , gi nipple 50x150mm gi nipple 50x150mm , gi tee equal 25mm gi tee equal 25mm , gi union 20mm gi union 20mm , gi union 40mm gi union 40mm , gi union 50mm gi union 50mm , tc 15 coupling with nut & bolt suitable for 60 hp tc 15 coupling with nut & bolt suitable for 60 hp , ac three phase static energy meter capacity 5 30a lcd type ac three phase static energy meter capacity 5 30a lcd type , led 5w thread type led 5w thread type , m seal 100 gms pkt m seal 100 gms pkt , test lamp bulb 100w test lamp bulb 100w , exhaust fan motor 250/300mm copper winding exhaust fan motor 250/300mm copper winding , exhaust fan motor 350 mm copper winding exhaust fan motor 350 mm copper winding , exhaust fan motor 450 mm copper winding exhaust fan motor 450 mm copper winding , acrylic shelf plain 450 mm long and 5.5mm thick acrylic shelf plain 450 mm long and 5.5mm thick , acrylic side corner self size 10 acrylic side corner self size 10 , alum bow handle 200mm alum bow handle 200mm , alum haples and staples 150mm alum haples and staples 150mm , aluminium hasp and staple 150mm aluminium hasp and staple 150mm , aluminium sheet 0.56mm width 4 aluminium sheet 0.56mm width 4 , anti termite treatment in 10 ltr anti termite treatment in 10 ltr , araldite rasine araldite rasine , black powder for spirit polish black powder for spirit polish , butt hings 50mm butt hings 50mm , cane plastic 2mm white cane plastic 2mm white , cane plastic 4mm white cane plastic 4mm white , cloth mal mal white cloth mal mal white , cloth cotton green blazer cloth cotton green blazer , cp coupling 38mm did for urinal cp coupling 38mm did for urinal , cp curtain rod bracket l type 15mm cp curtain rod bracket l type 15mm , cpvc coupling `15mm cpvc coupling `15mm , cpvc ...

Due Date : November 09, 2021

Tender Value : ₹ Ref. Documents

View Tender
30
Indian Army - Rajasthan

29760518 bids are invited for pre fabricated shelterwith accessories pre fab shelter , false ceiling with accessories pre fabricated shelter (45ft x 30 ft) for development of motivational hall at laungewala, rajasthan , pre painted galvalumesheets pre fabricated shelter (45ft x 30 ft) for development of motivational hall at laungewala, rajasthan , heat reflective aluminum sheet pre fabricated shelter (45ft x 30 ft) for development of motivational hall at laungewala, rajasthan , windows with curtain rod pre fabricated shelter (45ft x 30 ft) for development of motivational hall at laungewala, rajasthan , doors various types pre fabricated shelter (45ft x 30 ft) for development of motivational hall at laungewala, rajasthan , sun shade for cooler windows pre fabricated shelter (45ft x 30 ft) for development of motivational hall at laungewala, rajasthan , aluminum ventilators pre fabricated shelter (45ft x 30 ft) for development of motivational hall at laungewala, rajasthan , frame for doors pre fabricated shelter (45ft x 30 ft) for development of motivational hall at laungewala, rajasthan , frp doors pre fabricated shelter (45ft x 30 ft) for development of motivational hall at laungewala, rajasthan , cement base with non skid ceramic tiles pre fabricated shelter (45ft x 30 ft) for development of motivational hall at laungewala, rajasthan , water proofing compound pre fabricated shelter (45ft x 30 ft) for development of motivational hall at laungewala, rajasthan , pcc blocks pre fabricated shelter (45ft x 30 ft) for development of motivational hall at laungewala, rajasthan , exhaust fans pre fabricated shelter (45ft x 30 ft) for development of motivational hall at laungewala, rajasthan , ceiling fan pre fabricated shelter (45ft x 30 ft) for development of motivational hall at laungewala, rajasthan , window acs for air conditioning pre fabricated shelter (45ft x 30 ft) for development of motivational hall at laungewala, rajasthan , electrical fittin...

Due Date : November 13, 2021

Tender Value : ₹ Ref. Documents

View Tender
33
Indian Army - Rajasthan

29587379 bids are invited for aluminium lugs aluminium lugs 400 sqmm , switch socket combination switch socket combination 6/16 amps , tester lamp tester lamp bulb 100 watt , exhaust fan motor copper winding exhaust fan motor 250/300mm copper winding , exhaust fan motor coppr winding exhaust fan motor 450mm coppr winding , alum bow handle alum bow handle 200mm , aluminium sheet aluminium sheet 0.56mm width 4 , aluminium handle 100 aluminium handle 100mm , anti termite treatment anti termite treatment in 20 ltr , araldite araldite rasine , black powder black powder for spirit polish , cp curtain rod bracket cp curtain rod bracket l type 15mm , cpvc female adopeter (plastice) cpvc female adopeter (plastice) 15mm , cpvc male adopter (rass thread) size 15x25mm cpvc male adopter (rass thread) size 15x25mm dia , cpvc pipe 15mm 3 mtr cpvc pipe 15mm 3 mtr length , cpvc tee 15 cpvc tee 15mm , curtain bracket fancy type 25 curtain bracket fancy type 25mm , curtain bracket plain chromium plated 20mm dia curtain bracket plain chromium plated 20mm dia fancy , emery pape 100mm 60 no emery pape 100mm with 60no , emery pape 100mm 80 no emery pape 100mm with 80no , epoxy resine prime epoxy resine primer , flushing cistern pvc bend small flushing cistern pvc bend small for ewc , gi elbow 15mm gi elbow 15mm , gi nipple 15x50 gi nipple 15x50mm , gi socket reducer 20x15 gi socket reducer 20x15mm , machine screw half threaded machine screw half threaded 6x60 , nut & bolt with washer 3x16, 1 nut & bolt with washer 3x16, 1 long , nut bolt with washer 3x16, 1/2 nut bolt with washer 3x16, 1/2 long , putty oil putty , paint enamel paint synthetic enamel , peg set peg set , piano type hinges ss 20mm thick & 6 ft piano type hinges ss 20mm thick & 6 ft long , playwood commercial of size 3672x12mm thick playwood commercial of size 3672x12mm thick (20 nos) , pvc pipe 50mm dia 3 mtr pvc pipe 50mm dia 3 mtr long , pvc role plug p...

Due Date : October 20, 2021

Tender Value : ₹ Ref. Documents

View Tender
34
Urban Improvement Trust - Rajasthan

29302967 miscellaneous works in oxyzone , kota civil work &f looking mirror 5mm thick of approved make with ornamental frame size 50x12 with 6mm ply board on back side complete as per approved sample 2 p&f rigid pvc pipe (is:4985 mark) class ii/ (4 kg. /cm2.) approved quality /makeincluding joining the pipe with solvent cement rubber ring and lubricant.63 mm dia 3 provding and fixing stainless steelgate gratting and made of stainless steel pipe with hold fast and fitting and complete as per design and driwing including cutting welding etc.the stainless steel shall be 304 grade and shall confirm to relevant i.s. specifications. 4 providing& fixing door, window, chowkhats and other frames, including antitermite treatment, m.s. flat, hold fasts of size 250 x 40 x 3mm fixed with m.s. bolt 5mm dia 50mm long duly embedded in cement concrete m 15 grade : kiln seasoned and chemically treated hollock wood. grade i 5 supply & stacking good soil of earth at site complete including loading unloading & transportation etc. good soil of earth 6 supply of dry manure including loading unloading, transportation & stacking at site. 7 goat dungmanure. 8 vermi compost 9 spreading of manure and good earth in required thickness (cost of manure and good earth to be paid separately). 10 supply of different varities of tree/shrubs/climbers according to height and age of the plant at side including loading/unloading & transportation etc.complete 11 different flowering plants 900mm to 1500 mm 12 different varieties of shrubs 600mm to 900 mm 13 earthwork in rough excavation,banking excavated earth in layers not exceeding 20cm in depth,breaking clods watering,rolling each layer with 1/2 tonne roller,or stone or steel rammers and rolling every 3rd and top most layer with power roller of minimum 8 10 tonne capacity and dressing up in embankment for roads,flood banks marginal banks and guide banks or filling up ground depressions, lead up to 50 mtr. and lift up to 1.5 mtr. :all kinds of soil 14 providing, laying and spreading of granular sub base by providing close graded material, mixing in a mechanical mix plant at omc carriage of mixed material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401.plant mix methodgrading iii 15 providing and laying in position cement concrete including curing,compaction etc.complete in specified grade excluding the cost of centering and shuttering all work upto plinth level.m10 grade nominal mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stoneaggregate 20mm nominal size). 16 random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in:cement mortar 1:4 ( 1 cement : 4 sand). 17 providing and fixing 15 to 20 mm thick granite stone slab mirror polished and machine edge cut in walls, pillars, steps, shelves, sills counters, floors etc. laid on 12 mm (av.) thick base of cement mortar 1 : 3 (1 cement : 3 coarse sand) jointing with white cement mortar 1 : 2 (1 white cement : 2 marble dust) with pigment to match the shade of the granite slab complete including rubbing and polishing of :good quality south black above 3601 cm2 slabs 18 supply andmixing of cocopeat for miyawaki plantation work as per norms direction given by site engineer incharge. 19 supply andmixing of rice husk and jeevamrutfor miyawaki plantation work as per norms direction given by site engineer incharge. 20 supply and planting of trees of specified species on existing prepared tree pit develop by miyawaki method of height 1 2 feet 21 providing and fixing of smooth clay brick cladding 2.5 thick as per drawing attached and under the direction of engineer incharge and approval from architect. 22 providing & fixing natural stones in garden area including fixing,transportation, loading, unloading complete in all respect as per the direction of engineer incharge and architect with all lead & lift. 23 mandna art work on wall of with prepration of base and mandna withacrylic exteriar paint etc as per attetch typical drawing and direction of engineer in charge. 24 providing & making artistic/heritage painting with the using oil paint/apex ultima or equivalent exterior paint having anti algal and dust pick up resistance with finish as per direction of engineer in charge on wall faces/panels etc. with approved colour in following patterns including painting base works of required exterior paint in approved quality/brand: the painting shall be based on themes related to flora & fauna like creepers flower pots, animals, birds & natural figures. as the work shall be at the level of similar to enclosed drawing. 25 drip irrigation using combination of 16mm pvc pipes, using a driper of 8 liter per hour dischrge which can be un screw and clean in case of salt accumulation including pressure compensatingdriper, elbow, end cap, main,sub main, lateral, sub lateral of appropriate is standard. 26 supply / installation / testing / commissioning of spray pop up having 15 70 psi flow minm. 3.7 gpm & ½” female threaded inlet with 1” body diameter, and pop up ht. 4” complete with nozzle and other fittings with adjustable angle 0 degree to 360 degree and radius 0 to 15 make rain bird/vyrsa as per direction of engineer in charge. 27 supply / installation / testing / commissioning of 20 mm pop up connecting asembly . the tubing shall be made of polypropylene having wall thickness 2.3 mm, with working pressure of 5.5kg/cm2at 43opop up connecting asemmbly with 4 elbow, as per direction of engineer in charge. 28 supply / installation / testing / commissioning of service saddle 63 mm x 20mm made of polypropylene . the body of saddle made of vergin polypropylene in master batch uv stablized galvanized nut and bolt paraller female thread (pressure tight) make, as per direction of engineer in charge. 29 supply / instalation / testing / commissioning of50mm dia solenoid valve should be made of abs plastic having isi marked complete in all fittings as per direction of engineer in charge. 30 providing and fixing pvc valve having flow indicator when lever is removed security pivot to maintain lever in space double water tight joint direct injection stm non maximum penitration into the valve as per direction of engineer in charge.pvc valve 63mm 31 supply / instalation / testing / commissioning ofelectronically functioningcontroller unit station for automatic irrigation system as per direction of engineer in charge. 32 providing and fixingof panel box for recirculation drainage 15.0 hp pump of steel sheet snclosure with front door stand mounting hut type outdoor panel with detechable bottom platewith provision for incoming & outgoing cable, red oxide under coat and paint finish panel comprasing 1 no main incomming 2 pole mcb three nos back up hrc fuse for pump circuit contractors unit with over load relay start stop push button switch contractors unit with overload relay. all accesssories must be or cat. i dully tested complete in all respect & as per directed by engineer in charge. 33 providing and fixingof a double acting air release valve 2 made of high strength aluminium/plastic with fiber glass reinforced. the air release valve shall be capeble of both releasing and admitting air from and into the line. the working pressere shall be 10 bars and testing pressure shall be 16 bars as per directed by engineer in charge. 34 providing and fixing of auto flush hot dip galvanised screen filter 40m3/hr confirming to is 12785:1994 having inlet & outlets connection;s of 3, 2 pressure gauge ports of 3/4 ,2 outlet for flushing of at bottom of filter & maximum working pressure of 14 bars with 2 pressure gauze (glycerine filled). 4 (0 10 kg/cm2) as per direction of engineer in charge. 35 supply, installation, commissioning and testing of 15 hp monoblock submersible pump, ac 3 phase 380/440 volt, 50 cycle, each supply with foundation bolt, suction stainless steel mesh filter cover with 10 mtr. of 2.5 sq mm submersible cable duly insulated. 36 providing and fixingguide map of size 2400x1500mm board size 2100x1500mm surrounded with 50x50x5mm ss box section frame on vertical post of 75x100mm. ss box section frame 5mm thick ss plate with acrylic sheet to cover as per drawing complete in all respect & as per directed by engineer in charge. 37 providing and fixing river pabbals (size 150mm to 200mm) for annicuts,side wall protection of streem, properly laid embeded/interlocked and jointed complete in all respect & as per directed by engineer in charge. 38 providing and fixing bamboo bird feeding tray of size 1350mm x 350mm dia with aluminium sheet inside with all treat antitermite treatment and water proofing as per directed by engineer in charge. 39 supply, installation, testing and commissioning ofhollow cone spray nozzles mount with unique design generates a precise, uniform spray, distribution for spray performanceand reliabilty that superiornto conventional insert dependdent tangential full cone nozzles with top and bottom mounting featuress on 32 mm hdpe pipe. the spray nozzles having inlet size 3/8 bsp material of construction nylon 6(pvdf) having operating temprature nylon 800c, pp 680c, pvdf 1150c as per direction of engineer in charge. 40 supply, installation, testing and commissioning ofbend with 22.50 for above hollow cone spray nozzles. the work should be carried out as per direction of engineer in charge. 41 supply, installation, testing and commissioning ofriser outlet ofnylon made for above hollow cone spray nozzles. the riser should be one side hinged and other side openable system as per direction of engineer in charge. 42 supply, installation, testing and commissioning ofmounting stand of gi pipe of 50mm dia having height 10 12 with fabricateed locking arrangement of 32mm dia pipe hdpe pipe on top as per direction of engineer in charge. 43 providing and applying saint globain certainteed roofing shingles lnandmark ar, as per approved shade. application includes bitumen primer single coat, applying swift start starter strip at eve end on plastered surface as per direction of engineer in charge. the shingle should confirm to following standards: 1. construction 3 piece laminated fiber glass.2. astm d3081 asphalt shingles combined with glass felt and surfaceed with mineral granules.3. astm e108 class a fire resistance.4. astm d3161 for 110 mph wind resistance.5. ul (under writer lab) certification for all the above. 44 sitc of architecturally designed planter pole of height 3.00 meter having cast ironflower basket 12nos with hanging arrangement bracket with two arms. pole thickness not less than 2.9mm and should be processed with epoxy zink phosphate primer and finished with environmentally stable polyurethen based paint, complet in all respect as per direcion of engineer in charge. 45 fabrication and instalation of ornamental cast ironwork onlyfor dome and tree atcity park, kota as perapproved drawing including all required bolts, nuts and welding, with anti corrosive primer and coated with two coats of polyurethane paint coating in glossy colour as per direction of engineer incharge. 46 providing and fixing of kinectic tower sculpture having height 2.10 to 2.40 meter withmetal blade and self rotating bearing by wind pressure complete in all respect as per drawing and direction of engineer incharge. 47 providing and fixing of concrete flower pots having dia 800mm and height 900mm with base dia 550mm, consisting meenakari work on around outer side withembosed text city park kota, complete as per attached drawing and as per the direction of engineer incharge. 48 supply / installation / testing / commissioning tower clock size 2.25 meter, clock body, aluminum hands (made up of aluminum with a strong substructured static and dynamic balanced)• gps based clock movement with stepper strong gearing motor, bronze bearings with protection tube mechanism assembled in aluminium die cast enclosure the clock system will run in the electricity and will directly change over battery in event of power failure. our master clock connected ac main from the master clock four set of wire connected to each slave mechanism which is fixed at the back of the dial. master clock pulse signal are set periodically to islave clock which make the hand to move. the slave machine works independently and can only run in receiving the signal from master clock*ms dial ms frame with acrylic cover[ 6mm*time controller gps antenna*battery back up 48 hours •power supply and batteryautomatic light system [5pm 6am] *contractor has to maintain the clock for five years from any defect 49 providing and fixing touch free flushingsensor urinal with inbuilt sensor and all accessories having size 29.5x32.5x57.5 cm as per approved make by site engineerengineer in charge. make jaquar, cera, hindware or equivalent. 50 electrification 51 wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv gradeand 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) ofapproved make in surface / recessed isi marked medium duty pvc conduit & its accessories, round tiles,hot dipped galvanized modular box with earth terminal, 6 a modular switch,modular plate with grid plate,screws,making connections, testing etc. as required.gr i 52 short point (up to 3 mtr.) 53 medium point (up to 6 mtr.) 54 long point(up to 10 mtr..) 55 wiring of twin control light point with 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv gradeand 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) of approved make in surface / recessed isi marked medium duty pvc conduit & its accessories, round tles, hot dipped galvanized m.s modularbox of 20 swg with earth terminal,6 a two way modular switch, modular plate with grid plate,screws,making connections, testing etc. as required.gr i 56 long point(up to 10 mtr..) 57 wiring of 3 pin 5 amp. light plug point with 1.5 sq. mm nominal sizefr pvc insulated unsheathed flexible copper conductor 1.1 kv gradeand 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade(is:694) of approved makein surface / recessed isi marked medium duty pvc conduit & its accessories, hot dipped galvanized m.s modular box of 20 swg with earth terminal, 6 a modularswitch, 6 a modular socket, modular plate with grid plate, screws, making connections, testing etc. as required.gr i 58 on board 59 medium point (up to 6 mtr.) 60 long point(up to 10 mtr..) 61 supplying and drawing fr pvc insulated & unsheathed flexible copper conductor isi marked (is:694) of 1.1 kv grade and approved make in existingsurface or recessed conduit/casing capping including making connections etc. as required.gr i 62 1 x 1.5 sq.mm 63 1 x 2.5 sq.mm 64 1 x 4.0 sq.mm 65 supplying and fixing of power plug point modular accessories on hot dipped galvanized modular on surface or in recessed with suitable size of grid plate with cover plate including cost ofmodular 16 amp. switch and socket outlet, making connection, testing, etc. as required.gr i 66 p&f 240/415 v ac mcb with positive isolation of breaking capacity not less than 10 ka (b/ c/ d tripping characteristic) isi marked is 8828(1996)]/ conforming to iec 60898 in existing board/sheets including making connections, testing etc. as required.gr i 67 6 a to 32 a rating 68 double pole mcb 69 6 a to 32 a rating 70 triple pole mcb 71 40 a 63 a rating 72 p&f recessed/ surface mounting heavy duty horizontal type sheet steel distribution board phophatised/ powder painted complete with suitable rating insulated copper bus bar, shorting link , neutral link, earth link and din bar,masking sheet, conforming to is13032 & is8623 including making internal dbterminations with copper lugs, testing etc. as required.gr i double door (three phase) 8 way 73 p&f recessed/ surface mounting heavy duty vertical type 16 swg sheet steel distribution board with provision of incomer suitable for mccb and sp / tp mcb as outgoing ,phophatised ,powder painted complete with insulated suitable ratingcopper bus bar , neutral link, earth link and din bar, masking sheet & conforming to is13032 & is8623 including making internal db terminations with copper lugs , testing etc. as required. 74 single door with provision of incomer mccb 100/ 125 a rating 4 way 75 p&f metal clad industrial plug top & socket unit with pin and sleeve type contact on porcelain/ bakelite base in sheet steel enclosure (without mcb) including making connections, testing etc.as requiredgr isingle / double pole(three pin) 76 32 a 77 p & f socket size flush type 120/280 watt rotary 5 step fan regulator including making connection testing etc. as required.gr i 78 p & f following size mounting grid plates with cover plates 79 1/2 module 80 p & f following size hot dip galvanized m.s. box of 20 swg with earthing terminal in recess/ surface suitable for modular accessories as required. 81 1 2 module 82 sitc of quick make and quick break4 polecurrent limiting mccb having following current rating, short circuitbreaking capacityat 440/415 v, 50 hz; o/l & s/c settings and conforming to is 60947 2 / iec 60947 2 with front face and centralised adjustable, line load interchangeability, having positive isolation capability, provision for uvr , shunt trip ,earth fault trip, push( test) to trip , including making connections with lugs & spreaders,etc. as required.gr i with thermal magnetic release 83 up to 100 amp , 25 ka, fixed o/l & s/c setting 84 p/laying p.v.c./ xlpe insulated & p.v.c. sheathed cable of 1.1 kv grade with aluminium conductor of is:1554 p i / is :7098 p i of group 1 of approved makein ground as per is:1255 including excavation of 30cmx75cm size trench, 25 cm thick underlayer ofsand,iind class bricks covering, refilling earth,compaction of earth, making necessary connection, testing etc. as required of size.gr i 85 16.0 sq.mm 86 4 core 87 25.0 sq.mm 88 4 core 89 plate earthing as per is:3043 with g.i. earth plate of size 600mm x 600mm x 6.0mm by embodying3 to 4 mtr. below the ground level with 25mm dia. g.i. b class watering pipe including all accessories like nut, bolts, reducer ,nipple, wire meshed funnel, and c.c.finished chamber covered with hinged type with locking arrangement c.i. cover,c.i. frame of size300mm x 300mm complete with alternate layers of salt and coke/charcoal, testing of earth resistance as required. 90 s & laying following size earth wire/stripin horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required. 91 10 swg gi. wire 92 p & f star rated double ball bearing capacitor start, aluminium body & blade ceilingfanwith down rod up to 30 cm with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required.gr i 93 1200 mm sweep 5 star rated 94 p & f 18 swgm.s. recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm,12 mm dia rod fan hook with 100 mmlength extended on each side . 95 p&f of double ball bearing, capacitor startsingle phase metallicblade fresh air fan, in existing opening including cost of hardware , flexible copper conductor, making connections, testing etc. as required.gr i 96 225 mm sweep 97 p & f of gravity louver shutter of superior quality made out of pvcincluding cost of nuts, bolts, etc as reqd. 98 up to 380 mm size 99 p & f 9/11/13/ watt cfl mirror light with crcapowder coated housing, diffuser, end covers, copper ballast, holder prewired upto terminal block including making connection testing etc. as required(without tube)gr i 100 p & f isi marked6 amp bakelite batten/angle holder including making connection testing etc. as required. 101 p & f is:371 marked6 amp surface type ceiling rose including making connection testing etc. as required. 102 p & f of ip 20 led tube light 20 watt with external batten made from crca sheet steel suitable to replace t 8/t 12 tube light, integral driver, 2000 luman + 5% tolerarrce system luman efficiacy of 100 lm/ watt minimum expected life time of 25000 burning hours, cct 5700 k ansi, cri 80, driver efficiency >85%, life expectancy of driver rnin 30000 hrs. pf 0,95 at full load/ 230 volt ac. 103 p & f of ip20 led recessed / surface mounted, round / sqaure non dimmable downlight with dle cast aluminum housing & heat sink for heat dissipation, high purity reflector with external bis certified 2.5 kv surge protected driver having efficiency > 85% and in compliance to iec standards. system lumen efficacy of ~ 100 1m / watt and life time of minimum 35000 burning hours with 70% of intial lumen maintaned, cct 30000k / 40000k / 60000k , maximum power consumption should not more than the specified rating and fixture shall be of cecompliance. surface mounting 104 led downlight 18/20w 105 p&f bus bar chamber housed in sheet metal box made out from 1.2 mm thick powder coated crca sheetfront openable bus bar made out of aluminium or wrought aluminium alloy suitable for 100 amp. capacity, bus barfixed on porcelain insulators at approved spacingincluding making connections etc. as required. 106 300 mm long , 4 strip 107 s & f of street light bracket made out from following size of b class gi pipe with heavy duty pole clamp, saddles suitable fastners etc. as required. 108 32 mm dia. ...

Due Date : October 11, 2021

Tender Value : ₹ 5 Crore

View Tender
35
Ministry Of Defence - Rajasthan

29262670 bids are invited for ( a ) supply & fixing aluminnium section ( squere section ) 82mm and thikness 3.5 mm un keep and maintenance items for briefing room , ( b ) m&l section as a fixing for binding purpose un keep and maintenance items for briefing room , ( c ) m&l tape for jointing acp sheets for binding purpose un keep and maintenance items for briefing room , ( d ) suplly and fixing aluminium sheets cover ( 1.5mm ) un keep and maintenance items for briefing room , ( e ) supply and fixing composite panel sheets ( 3.5mm ) un keep and maintenance items for briefing room total quantity : 1...

Due Date : September 21, 2021

Tender Value : ₹ 1.10 Lakhs

View Tender
37
Public Works Department - Rajasthan

28929487 miscellaneous work in pwd sub dv didwana earth work in excavation including stacking/ disposal of surplus earth with all lifts and lead upto 1000 meters exclusive of compensation of earth (morth specification clause 301 to 305). in hard soil mixed with kankar, boulders etc. upto 20% mechanically using bulldozer, f.e. loader and carriage upto 1 km by tipper/dumper. 5500.00 providing and laying granular sub base material having p.i.not more than 6, including compacted thickness and consolidation by 8 10 tonne power roller at omc to achieve desired density to required camber and grade including cost of water and hire charges of machinery, including t&p and all lead of material from quarry (compacted thickness to be measured).grading as per morth specification : table 400 1, 400 2 with cbr value not less than 15 to achieve 95% proctor density. 8250.00 providing and laying mechanically mixed and vibrated cement concrete in foundation upto a depth of 1.5 metres below ground level and 1.50 metres above ground/bed level as per morth specification : clause 1000 & 1700 p.c.c. 1:3:6 mix with crushed stone aggregate 20 mm nominal size. 70000.00 executive engineer pwd. dn. didwana executive engineer pwd. dn. didwana providing and laying plain cement concrete mix with stone aggregate 20 mm nominal size mechnically mixed and vibrated in foundation up to a depth of 1.50 metres below ground level and/or 1.50 metres above ground/bed level as per morth specification : clause 1000 & 1700. with all lead r.c.c. grade m 20 in bed plates upto ground level excluding cost of steel reinforcement but including the cost of centering & shuttering. providing and laying granular sub base material having p.i.not more than 6, including compacted thickness and consolidation by 8 10 tonne power roller at omc to achieve desired density to required camber and grade including cost of water and hire charges of machinery, including t&p and all lead of material from quarry (compacted thickness to be measured). grading as per morth specification : table 400 1, 400 2 with cbr value not less than 15 to achieve 95% proctor density supply of informatory / retro reflective sign board size 60 x 80 cm made out of 2.0 mm thick aluminum sheet face to be fully covered by white / blue high intensity grade retro reflective sheeting with red/ white symbol, cut out or screen printed background with epoxy paint, complete confirming to morth specifications clause 801 with angle iron post 65 x 65 x 6 mm, 3 mtr. long. providing and fixing of reinforced ferro cement drain cover designed duly marked on cover with adequate steel reinforce ment having thickness 75mm to 150 mm, anti corrosive bitumen painted m.s. plate, rim and on m.s. lifting hooks, admixture like plastisizer bond improving compound, shrinkage resistant compound, abrasion resistant complete as per approved design etc a class loading .1000 x 800 mm (150 mm thick...

Due Date : September 28, 2021

Tender Value : ₹ 3.94 Lakhs

View Tender
38
Rajasthan Rajya Vidyut Utpadan Nigam Limited - Rajasthan

28841712 supply of ferrous and non ferrous items , ss shims, aisi 304, 1200 x 2000 mm in following sizes : , 0.1 mm 410 mm x 18 mtr. ( 7.38 mtr.² ) , 0.2 mm x 410 mm x 18 mtr. ( 7.38 mtr.² ) , 0.1 mm , 0.2 mm , ss shims confirming to aisi – 304 ( non magnetic ) 350 mm width, in following thickness , 0.05 mm , 0.07 mm , 0.10 mm , 0.15 mm , 0.20 mm , 0.30 mm , 0.35 mm , 0.25 mm , 0.50 mm , s.s. shims conforming to aisi 304 ( non magnetic ) 350 mm width in following thickness , size .03 mm , 2 mm thk. , width 1.5 mtr. x 0.30 mm thk , g.i. elbo confirming to is 1879 , size –15 mm , size – 20 mm , size – 40 mm , g.i. elbow 25 mm , g.i. socket confirming to is 1879 , size – 40 mm , size – 15 mm , g.i. socket 25mm , g.i. nipple ( heavy duty ) confirming to is – 1879 , 1” × 6” , ½” × 6” , 1¼ x6 , g.i. union confirming to is –1879 , size – 20 mm , size – 40 mm , size – 15 mm , size – 25 mm , size – 32 mm , g.i. tee confirming to is –1879 , 20 × 20 × 20 , 15 × 15 × 15 , 25 × 25 × 25 , g.i. reducer ( heavy duty ) confirming to is 1879 , 1.25” × 1” , 1” × ¾” , 1” × ½” , g. i. plug confirming to is– 1879 outer threaded , size – 20 mm , size – 25 mm , size – 15 mm , g. i. plug confirming to is– 1879 inner threaded , size – 25 mm inner threaded , s.s. shim plates ( 350 mm width ) , size –0.05 mm , size –0.1 mm , size –0.2 mm , size –0.5 mm , brass rod ( circular ) , confirming tois : 319 / 1974 type k, composition cu 56 to 60 % , lead 2 to 3.5 % , iron 0.35 % total impurities excluding iron shall be 0.7 % only and remainder zinc, in 1 mtr. length in following sizes , 12 mm dia , 14 mm dia , 16 mm dia , 18 mm dia , 25 mm dia , aluminum sheet in following sizes , 1000 ×1000 ×0.3 mm , 1200×1200×1 mm , copper tube , size 8.4 mm x 10.0 mm x 2240 , bronze rod ( circular ) , size 75 mm , size 90 mm , size 110 mm , brass rod , size 1 mtr. × 50 mm , size 1 mtr. × 75 mm , size 1 mtr. × 90 mm , brass rod ( circular ) , confirming tois : 319 / 1974 type k, composition cu 56 to 60 % , lead 2 to 3.5 % , iron 0.35 % total impurities excluding iron shall be 0.7 % only and remainder zinc, in 1 mtr. length in following size 140mm dia , ss 410, circular rod, dia 60 mm , gi pipe heavy duty class c as per is 1239 , 1 / 2 , 1 , 3 / 4 , s.s. fittings , ss pipe size 1 / 2 ( 15mm ) , ss pipe size 1 ( 25 mm ) , ss 304 fittings bend ( s / r ) size 1 , bend ( short radius ) 1 / 2 for ss304 , gi fitting as per is –1879 , tee – 100 nb...

Due Date : September 27, 2021

Tender Value : ₹ 28.87 Lakhs

View Tender
42
Rajasthan Rajya Vidhyut Utpadan Nigam Limited - Rajasthan

28747468 supply of ferrous & non ferrous items 1 ss shims, aisi 304, 1200 x 2000 mm in following sizes : 1.01 0.1 mm 410 mm x 18 mtr. (7.38 mtr.²) 1307010005 nos. 9 1.02 0.2 mm x 410 mm x 18 mtr. (7.38 mtr.²) 1307010006 nos. 7 1.03 0.1 mm 0307010070 nos. 8 1.04 0.2 mm 0307010071 nos. 8 2 ss shims confirming to aisi – 304 (non magnetic) 350 mm width, in following thickness 2.01 0.05 mm 0307010056 mtr. 42 2.02 0.07 mm 0307010058 mtr. 13 2.03 0.10 mm 0307010057 mtr. 60 2.04 0.15 mm 0307010063 mtr. 25 2.05 0.20 mm 0307010072 mtr. 47 2.06 0.30 mm 0307010073 mtr. 17 2.07 0.35 mm 0307010060 mtr. 20 22 2.08 0.25 mm 0307010059 mtr. 45 2.09 0.50 mm 0307010088 mtr. 30 3 s.s. shims conforming to aisi 304 (non magnetic) 350 mm width in following thickness 3.01 size .03 mm 0307010080 mtr. 5 3.02 2 mm thk. 0307010042 mtr. 11 3.03 width 1.5 mtr. x 0.30 mm thk 0307010076 mtr. 5 4 g.i. elbo confirming to is 1879 4.01 size –15 mm 1503000066 nos. 270 4.02 size – 20 mm 1503000090 nos. 150 4.03 size – 40 mm 5003000015 nos. 130 4.04 g.i. elbow 25 mm 1509000039 nos. 180 5 g.i. socket confirming to is 1879 5.01 size – 40 mm 1503000055 nos. 115 5.02 size – 15 mm 2216020067 nos. 195 5.03 g.i. socket 25mm 1503000064 nos. 177 6 g.i. nipple (heavy duty) confirming to is – 1879 23 6.01 1” × 6” 4302020003 nos. 168 6.02 ½” × 6” 4302020002 nos. 310 6.03 1¼ x 6 4302020008 nos. 130 7 g.i. union confirming to is –1879 7.01 size – 20 mm 4306010016 nos. 97 7.02 size – 40 mm 4306010002 nos. 80 7.03 size – 15 mm 4306010009 nos. 232 7.04 size – 25 mm 4306010007 nos. 140 7.05 size – 32 mm 4306010003 nos. 30 8 g.i. tee confirming to is –1879 8.01 20 × 20 × 20 1503000059 nos. 50 8.02 15 × 15 × 15 1503000067 nos. 175 8.03 25 × 25 × 25 1503000053 nos. 70 9 g.i. reducer (heavy duty) confirming to is 1879 9.01 1.25” × 1” 4307010009 nos. 15 9.02 1” × ¾” 4307010008 nos. 35 24 9.03 1” × ½” 4307010033 nos. 70 10 g. i. plug confirming to is– 1879 outer threaded 10.01 size – 20 mm 4304000031 nos. 55 10.02 size – 25 mm 2216010176 nos. 125 10.03 size – 15 mm 4304000030 nos. 135 11 g. i. plug confirming to is– 1879 inner threaded 11.01 size – 25 mm inner threaded 1503000063 nos. 70 12 s.s. shim plates (350 mm width) 12.01 size –0.05 mm 0307010083 mtr. 5 12.02 size –0.1 mm 0307010019 mtr. 2 12.03 size –0.2 mm 0307010020 mtr. 2 12.04 size –0.5 mm 0307010064 mtr. 6 13 brass rod (circular ), confirming to is : 319/ 1974 type k, composition cu 56 to 60 % , lead 2 to 3.5 % , iron 0.35 % total impurities excluding iron shall be 0.7 % only and remainder zinc, in 1 mtr. length in following sizes 13.01 12 mm dia 1503000026 kgs. 2 13.02 14 mm dia 1503000255 kgs. 4 13.03 16 mm dia 1503000020 kgs. 4 25 13.04 18 mm dia 1503000256 kgs. 9 13.05 25 mm dia 1503000197 kgs. 156 14 aluminum sheet in following sizes 14.01 1000 ×1000 ×0.3 mm 1503000050 nos. 12 14.02 1200×1200×1 mm 3425000014 nos. 6 15 copper tube 15.01 size 8.4 mm x 10.0 mm x 2240 1503000102 nos. 6 16 bronze rod (circular ) 16.01 size 75 mm 1503000280 mtr. 6 16.02 size 90 mm 1503000281 mtr. 6 16.03 size 110 mm 1503000101 mtr. 6 17 brass rod 17.01 size 1 mtr. × 50 mm 1503000022 mtr. 7 17.02 size 1 mtr. × 75 mm 1503000024 mtr. 7 17.03 size 1 mtr. × 90 mm 1503000025 mtr. 8 18 brass rod (circular), confirming to is : 319/ 1974 type k, composition cu 56 to 60 % , lead 2 to 3.5 % , iron 0.35 % total impurities excluding iron shall be 0.7 % only and remainder zinc, in 1 mtr. length in following size 140mm dia 1503000270 mtr. 10 26 19 ss 410, circular rod, dia 60 mm 0107040018 kgs. 600 20 gi pipe heavy duty class c as per is 1239 20.01 1/2 1509000040 mtr. 535 20.02 1 1509000044 mtr. 490 20.03 3/4 1509000054 mtr. 310 21 s.s. fittings 21.01 ss pipe size 1/2 (15mm) 5010120021 mtr. 500 21.02 ss pipe size 1 (25 mm) 5010020021 mtr. 200 21.03 ss 304 fittings bend(s/r) size 1 3502010191 nos. 50 21.04 bend (short radius) 1/2 for ss304 3502010194 nos. 90 22 gi fitting as per is –1879 22.01 tee – 100 nb ...

Due Date : September 27, 2021

Tender Value : ₹ 28.87 Lakhs

View Tender
43
Government Ayurvedic College - Rajasthan

28734823 purchase of laboratory items plant implant , system equipment for rasshashtra laboratory & pg department gravity balance readability , tharmocouple tharmometer , digital lab tharmometeter , tlc kit thin layer chromatography , tlc chamber , tlc plate silica gel , aluminum sheets solvents , hexane , carbon tetrachloride , benzene toluence , dichloromethane , diethyl ether ethyl acetate , spirit lamp glass , silic crucible with lid feathers , curcible graphite , digital tharmocouple , moisture balance analizer , bunsen burner material stainless steel , table machine , ...

Due Date : August 11, 2021

Tender Value : ₹ 2.80 Lakhs

View Tender
44
Rajasthan Rajya Vidhyut Utpadan Nigam Limited - Rajasthan

28732684 supply of consumable items for turbine area against tender notice no. for unit1&amp2 of 600mw, katpp, rvunl, jhalawar teflon tape roll 3 / 4 wd 40 spray ( 420 ml ) hold tite ( liq. seal compound 500 gm ) loctite 567, 50 ml ( thread sealant ) loctite 406 6 molykote 1000 7 i hylomer universal blue rtv 732 silicon sealant in 300 rustolene 500 ml anabond 610 dpt set ( each 03 nos ) oil stone amri fine paper tap set 6mm to 24 mm threaded nrv 1 body:brass i 50 aluminum sheet size 0.5 mm thickness ( 1.25mtr.x3mtr. ) ss wire mesh 250 micron 1.5 mtrx10 mtr. 18 55 sim a 0.20x1000x500 mm sheet 0.50x1000x500 mm lapping past medium consumables for turbine area fine etc ...

Due Date : August 10, 2021

Tender Value : ₹ 1.45 Lakhs

View Tender
46
Central Public Works Department - Rajasthan

28313248 providing and fixing aluminum sheet on expansion joint of building and covering of paragola in gpra nirman vihar i, ii at sector 2, niraman vihar iii at sector 3 and niramn parisar at sector 7, vidhyadhar nagar, jaipur...

Due Date : July 02, 2021

Tender Value : ₹ 20.12 Lakhs

View Tender
47
Central Public Works Department - Rajasthan

27662908 providing and fixing aluminum sheet on expansion joint of building and covering of paragola in gpra nirman vihar i, ii at sector 2, niraman vihar iii at sector 3 and niramn parisar at sector 7, vidhyadhar nagar, jaipur...

Due Date : April 20, 2021

Tender Value : ₹ 20.12 Lakhs

View Tender
48
Public Works Department - Rajasthan

27574848 various civil work , topiary figures , swings , gym equipments at various location i . e . sunset point garden area etc . for devdelopment and beautification of nagadari hills in historical mandore garden campus , jodhpur. 1 1 dismantling tile work in floors and roofs laid in cement mortor including stacking of serviceable material and disposal of unserviceable material within 50 meter lead : for thickness of tiles 10 mm to 25 mm. nat mandore garden bi01010001010000000000000515bi0100001113 100 sqm 2 2 dismantling stone rubble masonry including stacking of serviceable material and disposal of unserviceable material within 50 meters in cement mortar. bi01010001010000000000000515bi0100001114 184.5 cum 3 3 fine dressed stone flooring over 20 mm ( average ) thick base of cement mortar 1:4 ( 1cement : 4 coarse sand ) with joints finished flush. red sand stone size not less than 1350 cm2, a ) 40mm bi01010001010000000000000515bi0100001115 1099 sqm 4 4 earth work in excavation by mechanical means ( hydraulic excavator ) / manual means in foundation trenches or drains ( not exceeding 1.5 m in width or 10 sqm on plan ) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. all kinds of soils bi01010001010000000000000515bi0100001116 282.2 cum 5 5 carriage of earth, sand , line morrum, manure or sludge lead above 1 km. upto 10 km. bi01010001010000000000000515bi0100001117 522.2 cum 6 6 providing and laying in position cement concrete including curing compaction etc. of specified grade excluding the cost of centering and shuttering all up to plinth level is 456 2000: 1:3:6 ( 1cement :3 course sand :6 graded stone aggregate 20 mm nominal size ) bi01010001010000000000000515bi0100001118 213.9 cum 7 7 random rubble stone masonary for foundation and plinth in cement sand mortar above 30 cm. thick wall is 1597 ( part i ) 1992 in : cement sand mortar 1:6 ( 1 cement:6 sand ) . bi01010001010000000000000515bi0100001119 92.48 cum 8 8 random rubble stone masonary for superstructure above plinth level one storey height above 30 cm. thick walls is 1597 ( part i ) 1992 in : cement sand mortar 1:6 ( 1 cement:6 sand ) . bi01010001010000000000000515bi0100001120 238.82 cum 9 9 extra for facing as per design and detailed specifications is 1597 ( part ii ) 1992 including additional cost of stones over item no. 6.1 & 6.2 for : course rubble facing second sort. bi01010001010000000000000515bi0100001121 545.13 sqm 10 10 rough chisel dressed stone flooring over 20mm ( av. ) thick base in cm 1:6 including pointing with cement mortar 1:2 ( 1 cement:2 stone dust ) with and admixture of pigment to match the shade of stone with joint thickness upto 15 mm:45 mm thick white sand stone. bi01010001010000000000000515bi0100001122 90 sqm 11 11 plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finished: 25 mm thick. bi01010001010000000000000515bi0100001123 258 sqm 12 12 providing and laying chequerred plain cement concrete embossed specially manufactured non slipping tiles of approved make 20 mm thick laid on 20 mm thick bed of cement mortar 1:6 jointed with neat cement slurry complete. add extra for chequerred coloured plain cement concrete or specially manufactured non slipping tiles of approved make 20 mm thick. bi01010001010000000000000515bi0100001125 200 sqm 13 13 providing and fixing jodhpur red stone jali ( three line dressed ) with thambali as per the picture shown and as per the old pattern as constructed at canal bridge of mandore garden. height of middle portion of jali is 21, width at middle portion is 7.5 , thickness of bottom and top portion is 9.5 ( bottom design stone in 2 pieces as per old design and bottom & top dasa made perfectly even ) . work must be done as per the old design approved by engineer incharge including cost of material, labour and chiesel dressing ( talpai ) . bi01010001010000000000000515bi0100001126 90 m 14 14 supply and fixing jodhpur sand stone machine cut kerb stone ( 10cm wide 40 cm. height ) fixed in white cement sand mortar 1:4 with pigment including earthwork. bi01010001010000000000000515bi0100001127 64 mtr. 15 15 clearing grass and removal of rubbish maximum 150mm in thickness upto a distance of 100 mtr outside the periphery of the area by manual means . note ; where only grass is met with , the area clear shall be measured & paid for under this item ( morth clause 201 ) bi01010001010000000000000515bi0100001128 0.12 hectare 16 16 cutting & moulding by hand power grinder including polishing etc. complete in all type of kota / marble / granite / jodhpur stone etc. 25 mm. bi01010001010000000000000515bi0100001129 4100 mtr. 17 17 providing and fixing steel gate grating and grills made of angles, tees, square bars or other flats black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide. nadd extra if square, rectangular hollow tubular sections are used. bi01010001010000000000000515bi0100001130 1100 kg. 18 18 p & f pvc storage tank ( is:12701 marked indicating the bis license no. ) of approved make with cover, 25 mm dia 1 m long g.i. over flow pipe & 25 cm. long wash out pipe with plug & socket, including making connection etc. complete of approved design. 1000 litres capacity. bi01010001010000000000000515bi0100001131 3 nos. 19 19 p & f european type white glazed vitreous china ist quality w.c. pan ( is:2556 mark ) with p or s trap including cutting and making good the wall and floor. bi01010001010000000000000515bi0100001132 1 nos. 20 20 p & f water closet seat covers with brass hinges complete is 2548 1996 : solid pvc ( isi marked ) grade i white for ewc. bi01010001010000000000000515bi0100001133 1 nos. 21 21 p & f low level flushing cistern of 10 litres capacity ( is:2556 mark ) of approved make with complete fittings c.i. brackets duly painted, brass ball cock with ball, ( is:1703 mark ) complete including cutting and making good the wall : wvc with c.p. brass bend. bi01010001010000000000000515bi0100001134 1 nos. 22 22 p & f wvc wash basin ( ist quality is:2556 mark ) of approved make with c.i. brackets duly painted 1 no. 15 mm c.p. pillar cock ( is:8934 mark ) & 32 mm c.p. brass waste coupling of approved make 25 mm g.i. waste pipe complete including cutting & making good the wall : size 580 mm x 430 mm bi01010001010000000000000515bi0100001135 3 nos. 23 23 p&f towel rail or ring of approved quality / make: c.p. brass towel rail elbow type with concealed screws size 600mm ( heavy duty ) bi01010001010000000000000515bi0100001136 3 nos. 24 24 p & f inlet connection ( angle valves ) superior quality, of approved make, for wash basin, gyser etc. c.p. inlet connection 15 mm brass ( is:8931 marked ) . bi01010001010000000000000515bi0100001137 4 nos. 25 25 p & f bib cock ( is:8931 mark ) superior quality of approved make : c.p. brass long body, 15 mm nominal bore weight not less than 690 gm. bi01010001010000000000000515bi0100001138 3 nos. 26 26 construction of manhole in all type of soil inner size 90 x 60 cm. thick masonry in cm 1:6, 10 cm. thick cement concrete 1:5 10 in foundation, 20 mm thick inside plaster in cm 1:6, finished with floating neat cement, 50mm thick m 15 grade c.c. flooring, making channels, 80mm thick stone slab covering with 40mm thick m 15 grade c.c.flooring , 25 kg. ci cover with frame of 40mm dia, earthwork etc. complete as per design including disposal of surplus earth within 50 mtr. lead. depth upto 0.5mtr bi01010001010000000000000515bi0100001139 3 nos. 27 27 p & f 15 mm. dia connection pipe of approved quality / make: c.p. brass pipe with cp brass nuts upto length 600 mm. bi01010001010000000000000515bi0100001140 2 nos. 28 28 renewing glass panes, with puty and nails wherever necessary: 4 mm thick plain glass panes. bi01010001010000000000000515bi0100001141 40.44 sqm 29 29 providing and fixing granite stone slab mirror polished and machine edge cut in walls, pillars, steps, shelves, sills, counters. floors etc. laid on 12mm ( av. ) thick base of cement mortar 1:3 jointing with white cement mortar 1:2 ( 1 white cement: 2 marble dust ) with pigment to match the shade of the marble slab complete including grinding, rubbing and polishing of is 3316 1974 : jhunjhunu / jalore ( red / choclate colour ) above 3601 cm2 slab bi01010001010000000000000515bi0100001142 2.25 sqm 30 30 marble stone flooring table rubbed, 18 20 mm thick over 20 mm ( av. ) thick base of cm 1:4 ( 1 cement:4 coarse sand ) jointing with white cement mortar 1:2 ( 1 white cement:2 marble dust ) with pigment to match the shade of the marble slab including grinding rubbing and polishing complete is 1130 1969. makrana second quality plain. upto 801 to 1500 cm2 tiles bi01010001010000000000000515bi0100001143 10.8 sqm 31 31 deep groove pointing on stone masonry in white cement sand mortar ( 1:3 ) with colour pigment of approved shade for all type of masonry incl. racking of joint as per specification complete in all respect. bi01010001010000000000000515bi0100001144 1300 sqm 32 32 cement concrete flooring grade 1:2:4 ( 1 cement:2 coarse sand:4 graded stone aggregate ) rounding off edges etc. but excluding the cost of nosing of steps etc. complete is 2571 1970 : 50 mm thick with 20 mm thick nominal size aggregate. bi01010001010000000000000515bi0100001145 360 sqm 33 33 providing & fixing of topiary figures as shown in picture in different shape make by gi hot dip wire size 10 no. gauge and bar size 10mm tmt and other material as required, fixing with cement concreat with ratio of 1:2:4 complete in all respect directed by engineer incharge n ( a ) horse size 9 ft length and height 8 ft bi01010001010000000000000515bi0100001146 2 each 34 34 cow size 7 ft length and height 6 ft bi01010001010000000000000515bi0100001147 2 each 35 35 giraffe size 10 ft length and height 12 ft bi01010001010000000000000515bi0100001148 2 each 36 36 giraffe size 9 ft length and height 9 ft bi01010001010000000000000515bi0100001149 2 each 37 37 elephant size 8 ft length and height 8 ft bi01010001010000000000000515bi0100001150 2 each 38 38 elephant size 6 ft length and height 6 ft bi01010001010000000000000515bi0100001151 2 each 39 39 welcome elephant size 7 ft length and height 5 ft bi01010001010000000000000515bi0100001152 2 each 40 40 camel size 9 ft length and height 12 ft bi01010001010000000000000515bi0100001153 2 each 41 41 camel size 8 ft length and height 9 ft bi01010001010000000000000515bi0100001154 2 each 42 42 frog size 3 ft length and height 2 ft bi01010001010000000000000515bi0100001155 2 each 43 43 kangaroo size 7 ft length and height 6 ft bi01010001010000000000000515bi0100001156 2 each 44 44 butterfly size 6 ft length and height 4 ft bi01010001010000000000000515bi0100001157 2 each 45 45 peacock 7 ft length and height 5 ft bi01010001010000000000000515bi0100001158 2 each 46 46 deer 6 ft length and height 5 ft bi01010001010000000000000515bi0100001159 2 each 47 47 supply and fixing of ornamental and floral garden benches with pwd logo as shown in picture of decorative cast iron ( fe 15 grade as per is:2101:1993 standard amended upto date ) sides with 12 nos. of m.s. tubuler pipe of size 65 x 22 mm medium section with provision of grouting at all the four base ends one m.s. support at middle of the benches for extra strength and durability benches ends suitably grinded for smooth surface finish and primer coated and painted with coloured with wooden powder coated ( polyurthane type of powder paint ) over all length 150 cm., 70 cm. width and 80 cm height having over all weight 50.00kg + 05% kg. bi01010001010000000000000515bi0100001160 100 each 48 48 double swing : swing in which two children can enjoy at one time. the arch shaped side frame is made of 75mm nb b class gi pipe and top pipe is made up of 50mm nb b class gi pipe. the frame is powder coated to give an aesthetic look. the swing is made up of 5mm thick anti skid canvas top. the rubber belt seat is suspended on 6mm rubber coated gi chain. the ball bearings shall be mounted inside a specially designed nylon clamp. frame pipes firmly embeded in ground by 60 cm. depth in m 15 cc block. nheight of swing 2.60 mtr. ndistance between frame post 1.80 mtr. ndistance between frames 3.20 mtr. bi01010001010000000000000515bi0100001161 2 each 49 49 deluxe slide : deluxe slide chute is made from stainless steel ( ss ) of 304 grades with 16 swg sheet. the structure comprises of 20mm nb and 25mm nb b class gi pipe. the centre support is made in 100mm nb b class gi pipe and 15mm nb gi pipe. the ladder cum railing is made up of 20mm nb and 25mm nb b class gi pipe. the platform is made up of 14 swg aluminium sheets with anti skid for firm foot grip. there are triangular steps of 16 swg sheets. the chute has its end such as it causes safe landing of the child. the pipes are powder coated to aviod rusting. structure firmly fixed in ground in m 15 cc blocks. noverall length of slide 4.88 mtr. ( 16 ft. ) nwidth 0.90 mtr. riser 0.25 mtr. nht. of platform 2.13 mtr ( 7 ft ) bi01010001010000000000000515bi0100001162 2 each 50 50 providing and fixing of frp wave slide its required area 4.6 mtr x 0.9 mtr plat form height should be 5 ground level and should be made by 32mm nb and 25 nb and 20 mm nb pipe ms pipe slide length 10 all components paint by pu paint in multi colours. structure firmly fixed in ground in m 15 cc blocks. bi01010001010000000000000515bi0100001163 2 each 51 51 spiral slide : the chute of the sprial slide is made of frp ( fibre reinforced plastic ) having thickness of 4mm. slide centre support shall be 80mm nb b class gi pipe. landing module shall be supported by 20mm nb b class gi pipe. slide extension platform is made form frp ( fibre reinforced plastic ) . the ladder main frame is 25mm nb gi pipe. the railing shall be made from 15mm nb and 20mm nb b class gi pipe. all powder coated to aviod rusting. structure firmly fixed in ground in m 15 cc blocks. nlength of slide 3.6 mtr. nwidth 0.90 mtr. nriser 0.25 mtrs. nht of slide 1.80 mtrs. bi01010001010000000000000515bi0100001164 2 each 52 52 providing and fixing steel gate grating and grills made of angles, tees, square bars or other flats black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide. add extra if square, rectangular hollow tubular sections are used. bi01010001010000000000000515bi0100001165 1830 kg 53 53 painting with enamel paint of approved brand and manufacture to give an even shade: two or more coats on new work. bi01010001010000000000000515bi0100001166 400 sqm 54 54 painting with enamel paint of approved brand and manufacture to give an even shade: one or more coats on old work. bi01010001010000000000000515bi0100001167 205.2 sqm 55 55 welding by electric plant. bi01010001010000000000000515bi0100001168 500 per cm length. 56 56 dustbin of stain less steel with dustbin tank of size 700 mm. ( ht ) and 350 mm dia. of 1 mm thick ss sheet. dustbin frame of 1.20 mm thick ss square pipe of size 40x40 mm, ht 1200 mm., upper cover size 500x500 mm of 1 mm thick ss sheet including fixing system of nut and bolts ( the drum is mounted on movable round hinges to provide it complete rotation to facilitate the garbage romoval and safe from monkey etc. ) bi01010001010000000000000515bi0100001169 30 nos. 57 57 dustbin of hdpe material with roller as shown in picture of size nsize : 1370 x 1060 x 1340 mm nweight : 55 kg nmaterial : hdpe ncolour : green ncapacity : 1100 ltrs nload capacity : 440 kgs bi01010001010000000000000515bi0100001170 20 nos. 58 58 sky walker : narea 1.72 mtr x 0.63 mtr nsafe area : 2.54 mtr x 1 mtr nproviding and fixing sky walker made from b class gi pipe the main frame pipe is of a dia 100 mm made from c class g i pipe. the outer ring of sky walker is of 32 mm dia made from c class g i pipe for connecting the handle frame to main pipe of 60 mm diac class g i pipe is used. the bottom support of ms round plate of 250mm x 10mm dia thickness is welded at bottom. the leg movement frame is of 50 x 50 mm x 2 mm thick crc square pipe. tha handle frame is of 40 mm dia made from c class g i pipe. the foundation used for fixing is 80 x 40mm x 3 mm thickness c channel. the footrests is made from aluminum casting material, its sizes are 130x310x5 mm. closing caps made from top quality frp material with 5 mm thickness & plastic cap are used. the pins used are made up of 25mm dia bright bar. the bearings used are 6205zz & 6203zz permanent libricated sealed bering of reputed make. high tensile steel with galvanized nut bolts are used for assembly. the secrlips used for assembly are of 25mm dia. the powder coat is done by poly urethane & epoxy powder giving 60 to 70 micron thickness. bi01010001010000000000000515bi0100001171 2 nos. 59 59 leg press : area 0.40 x 1.77 mtr nsafe area : nleg press: providing, designing and fixing of leg press of size 2000 x 550 x 1600 mm fabricated with main post of 125mm dia and 3.0mm thick and rest of the pipe 40mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using akzo nobel or equivalent of 80 120 micron thick. all joints of pipe are robotic welded with joints scalloped as necessaryand dressed off removing sharp edges and burrs. zinc primer paint to be applied at all welding points prior to finishing. handle bars to be provided with high quality grip rubber on top end. pedals shall be made up of nylon alloy with rounded edges to prevent any impact of injury. seat and base plate cover to be made up from virgin lldpe manufactured by rotational moulding with minimum thickness of plastic as 3mm, colorful and uv resistant and environmental friendly. bearing used shall be maintenance free, duly oil sealed and nself lubricated made by reputed company to be approved by engineer in charge. equipment to be fitted with inbuilt limiters to prevent nunwanted movements. all open ends of pipe to be closed by gi / lldpe caps for user safety. the equipment to be fixed on ground. structure firmly fixed in ground in m 15 cc blocks. bi01010001010000000000000515bi0100001172 2 nos. 60 60 sit up board: ndimensions: 1820 mm ( length ) x 430 mm ( width ) x 580 mm ( height ) nsafe area : 2.8 mtr x 0.6 mtr. nsit up board equipment made from b class gi pipe of different nb nnb stands for nominal bore sizes i.e. internal diameter of pipe in millimeters. nthe main frame is of 75 mm nb made from b class g i pipe supported with the m.s. round plate of ø 250 x 10 mm thickness. fibre reinforced plastic sheet of 3 mm thickness is bounded on 25 mm nb ( g.i. ) b class pipe of main frame nthe base support of the sit up board is made 40 mm nb ( g.i. ) b class pipe nthe foundation used for fixing is structure and made from center pipe of gi of 80 mm nnb b class welded with ms. round plate of ø250 mm & 10 mm thick main pipe. nsupported with 25 mm x 25 mm m.s. angles of 3 mm thickness and 20 mm x 40 mm ncrc square pipes of 3 mm thickness nthe powder coating is done with pure polyester powder paints with 60 to 70 micron thickness of paint approved brand by engineer incharge. bi01010001010000000000000515bi0100001173 2 nos. 61 61 rower : narea : 1.2 x 1 mtr nsafe area : 1.5 x 1.5 mtr nproviding and fixing rower made from b class g.i. pipe the main frame is of 100 mm x 40 mm & 40 mm x40mm crc pipe with 2 mm thickness the handle frame is of 32 mm dia c class gi pipe the foundation used for fixing consists the three equal items i.e. of 40 mm dia made from c class gi pipe, c channel of 75 mm x 40 mm x 5 mm & 25 mm x 25 mm x 3 mm m.s. angle to join the movement frame to main frame seamless pipe of 50 mm dia & 3 mm thickness is used. the seats which are fitted on the main frame is made up of high equality frp material of size 330 mm x 300 mm of thickness 3 mm & ms plate of size 250mm x 200 mm x 5mm is used to support it. cloosing caps are made from top quality frp material which is of 2 mm thickness. the pins used are made up of 17 mm dia hardened bright bar. the bearnings used are of 6203zz permanent lubricated sealed bearing of reputed mde the handles used are of rubber grip high tensile steel with galvanized nut bolts are used for assembly in the bushes ( stopper ) used to avoide the collosion. the serclips used for assembly is of 17 mm dia. the powder coat is done by poly urethane & epoxy powder with 60 to 70 micron thickness. bi01010001010000000000000515bi0100001174 2 nos. 62 62 surf board ndiamensions : 910 mm ( length ) x 860mm ( width ) x 1400 mm ( height ) nsafe area : 1.39 x 1.27 mtr nsurf board equipment made from b class gi pipe of different nb. nnb stands for nominal bore sizes i.e. internal diameter of pipe is millimeters. nthe center pipe is of 15 mm nb made from b class gi pipe. the sleeve pipe is of 125 mm ob seamless pipe with thickness of 05 mm and bolted to main frame with m 10 ss bolts. nthe bottom support welded of m.s. plate of 250 mm dia & 10 mm thickness. nthe handle frame is of 25 nb made from b class g i pipe nthe handle frame is of 50 nb made from b class g i pipe is supported with 70 x 8 mm bend m.s. flat and can be replaceable. the foundation used for fixing is a structure and made from center pipe of gi of 80 nb b class welded with ms. round plate of 250 mm dia & 10 mm thick. main pipe supported with 25 mm x 25 mm m.s. angles of 03 mm thickness and 20 mm x 40 mm crc square pipes of 3 mm thickness bushes are used 70 mm outer diameter with 05 mm thickness is used. nthe footrests made from injection moulded plastic lldpe / hdpe for support to footrest 200mm x 250mm with 3mm thickness m.s. plate used. nclosing caps are made up of injection moulded plastic lldpe / hdpe. nthe pins used are made up of 35 mm dia sae 8620 bright material nthe bearing used are of :6007zz permant lubricated sealed bearing of reputed brand. nhigh tensile steel with galvanized nut bolts are used for assembly. nthe cerclips used for assembly is of a 34. nthe power coating is done with pure polyester power of ackzonoble or berger with 60 to 70 micron thickness. bi01010001010000000000000515bi0100001175 2 nos. 63 63 air walker : nmachine part description of the air walker n ( a ) mounting plate n ( b ) center pillar n ( c ) trapezium shaped pipe n ( d ) cap n ( e ) holding pipe n ( f ) hings supporter n ( g ) outuse l shaped pipe n ( h ) rectangular pipe n ( i ) standing pad n ( j ) triangular hinge supporter n1. a circular mounting plate of diameter 233 mm and thickness 8 mm 4 holes on this plate at 90 degree of which pcd 170 mm hole diameter is 20 mm. n2. on circular moving plate a center pillar is welded. diameter of center pillar is 125 mm and height is 233 mm. n3. jrapezium shapped pipe is welded to the center pillar from the middle at the base. jrapezium shapped pipes upper portion is open with two branches. n4. cap is on the two branches of upper portion / top of the branches are 925 mm wide and length of each branch is 885m. at the base of the branches the gap is 925 mm with a redius bend 235mm. n5. open end of trapezium shaped pipe is welded with a holding pipe. holding pipe has a straight length of 810mm and a 90 degrees radius on the both sides, then a small straight length of 246 mm. through this small straight length holding pipe is welded to trapezium shaped pipe. holding pipe is welded at an angle of 40 degrees to the open ends of trapezium shaped pipe height of joint is 1212mm n6. hinge support of length 126 mm is welded on the branches of trapezium shaped pipe at a height of 1117 mm from the base. n7. 2 obtuse l shaped pipes are connected to the hinge supporter by the bushes. bushes are welded at the upper portion of the obtuse l shaped pipe, lower portion of obtuse l shape pipe is welded with rectangular pipe of length 705 mm, radius 124 mm and short length 137 mm n8. on rectangular pipe standing pad are tightly screwed standing pad ( foot rest ) can be of plastic or metal. n9. triangular hinge supporter are welded to the hinge supporter to provide better strength. nnote : all the movable joints have a pin bearing in between, tightened with the allen bolt poly drive head bolt having plastic caps on the ends since plastic caps are fixed on the ends, the bolt cant be opened until they will be broken. bi01010001010000000000000515bi0100001176 2 nos. 64 64 tripe hip twister : nmachine parts description of tripe hip twister n1. mounting plate n2. center pillar n3. plastic cap n4. circular handle n5. connecting rod n6. floor rest pipe n7. standing pad nfoundation of machine is cemented and bolted with base channel and circular nmounting plate which dimension is below : n1. measurement of base channel is 3x6x2 n2. circular mounting plates diameter 233 mm and thickness is 8mm. 4 hole on this plate at 90 degree which pcd is 170 mm hole diameter is 20mm nmechanical dimension and measurement of machine are following : n1. a circular mounting plate which dimension is same of above circular mounting plate and it is tightened with nut and bolt. n2. on this circular mounting plate a center pillar is welded. diameter of center pillar is 150 mm and height is 1288mm. n3. plastic cap is fixed on the top of center pillar and tightened with help of screw. diameter and height is 120mm and 69mm. n4. circular handle is welded at the height of 1171 mm from the base of circular mounting plate. od of circular plate is 557 and id is 493mm. three pipe rod which diameter 32mm are welded at 120 degree. n5. connecting rod for floor rest pad which diameter is 48mm. it is being bended after 131mm at angle of 30 degree and bending radius is 124. bending length is 185mm. again it is being bended at angle of 30 degree and bending radius 76. bending length is 71mm. three pipes of same dimensioris are welded at the angle of 120 degree and collinear to 32 diameters pipe rod of circular handle. n6. three floor rest pipe which diameter 114 mm and height 105mm and welded at linear center with each connecting rod. n7. three plastic standing pad which diameter is 280mm and height is 36mm and attached with each floor rest with help of ball bearing which od 60mm. all plastic standing pad and floor rest pipe is connected with shaft which diameter is 28mm. nnote : all the movable joints have a pin bearing in between, tightened with the allen bolt polydrive head bolt having plastic cap on the ends. since plastic caps are fixed on the ends, the bolt cant be opened until they will be broken. bi01010001010000000000000515bi0100001177 2 nos. 65 65 chest press cum seated puller : ndimensions : 2000mm ( length ) x 710mm ( width ) x 2200 mm ( height ) nsafe area : 3.00 mtr x 1.7 mtr. nchest press cum seated puller equipment made up of b class g i pipe of different nb. nb stands for nominal bore sizes i.e. internal diameter of pipe in millimeters. nthe center pipe is of 125 nb made up of b class g.i. pipe. nthe bottom welded with support of m.s. round plate of ? 250 mm & 10 mm thickness. nthe connecting pipes are made up from 25 nb b class gi pipe. nthe handle frame is made up from 32 nb b class gi pipe nto build structue bushes are used which are mde fro seamless pipe of 50mm od and 6 mm thickness as well as 50 mm diameter solid bar is used. nthe foundation used for fixing is a structure and made from center pipe of gi of 80 nb b class welded with ms round plate of ?250mm & 10 mm thick. main pipe supported with 25mm x 25 mm. ms angles of 3 mm thickness and 20mm x 40mm crc square pipes of 03 mm thickness. nthe seats and back rests are fitted on the outer frames are made up of ms sheet of size 330 mm x 300 mm x 2 mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges. nclosing caps are made up of injection moulded plastic lldpe / hdpe. nfoundation cover cap is made from injection moulded plastic lldpe / hdpe. npins used of diameter 25mm and 17mm are made up from sae 8620 bright material nthe bearing used are of 62052zz & 6203zz permanent lubricated sealed bearing of reputed brand. nhigh tensile steel with galvanized nuts & bolts are used for assembly. nthe cerclips used for locking is made up of a24 a a16 nthe powder coating done with pure polyester powder from ackzonoble or berger paints with 60 to 70 micron thickness. bi01010001010000000000000515bi0100001178 2 nos. 66 66 multi functional trainer : n ( single user ) nmachine part description: n1. mounting plate 1 n2. cap n3. handle connecting pipe 1 n4. connecting pipe 1 n5. center piller 1 n6. holding pipe 1 n7. holding pipe 2 n8. movable pipe n9. square pipes n10. stepping plates n11. stepper base n12. standing plate n13. center pipe n14. mounting plate 2 n15. handle connecting pipe 2 n16. nylon pad n17. hinged pipe 1 n18. hinged pipe 2 bi01010001010000000000000515bi0100001179 2 nos. 67 67 shoulder builder nmounting plate ncenter pillar n2 hinge holding pipe n2 bending pipe ncap n2 u shapped pipes nhandles n2 straight pipe ( no. 1 ) nstraight pipe ( no. 2 ) nstraight pipe ( no 3 ) nseat base pipe nseat bending pipe nseat nback seat nhinge box nbracket holder n1. a circular mounting plate of diameter 233 mm and thickness 8 mm, there are 4 holes on this plate at 90 degree which is p.c.d. 17 mm hole diameter is 20 mm. n2. on circular mounting plate a center pillar is welded. diameter of the center pillar is 119mm and height is 1838mm. n3. cap is fixed on the top of the pillar with rivets. n4. at 1528mm vertical distnace 2 hinges holding pipes are welded in opposite directions. hinge holding pipes have clear hole for screw at 177mm distance. n5. bending pipes are welded to the hinge holding pipes and the center pillar to provide mechanical strength to the hinge holding pipe. n6. hinge box is fitted to the hinge holding pipes with a steel screw and bush. hinge box has a clear hole at the base. n7. u shapped pipes are welded at the upper part of the hinge box. n8. at the opening end of the u shapped pipe. handless are fitted with steel screw. n9. straight pipe no. 1 is fitted to the hinge box at the base with pin bearing n10. lower end of the straight pipe no. 1 is fitted to straight pipe with a pin bearing. n11. straight pipe no. 2 and no. 3 are joined to the center pillar and seat base pipe one over the other respectively with a gap of 490mm, through bracket jointers, which are welded to the centre pillar and seat base pipe also. n12. seat base pipe is connected with straight pipe no.2 and no. 3 with pin bearing. n14. seat and back seat are fitted on the seat bending pipe with pin bearing. these seats are of plastic. nnote : all the movable joints have a pin bearing in between, tightened with the allen bolt polydrive head bolt having plastic caps on the ends . since plastic caps are fixed on the ends, the bolt cant be opened until they will be broken. bi01010001010000000000000515bi0100001180 2 nos. 68 68 cycle : ndimensions : 1570mm ( length ) x 570 mm ( width ) x 900 mm ( height ) nsafe area : 2.50 mtr x 1.5 mtr. ncycle equipment made from b class g i pipes of different nb ( nb stands for nominal bore size i.e. internal diameter of pipe in millimeters ) nthe main frame of 75 nb made from b class g.i. pipes. nm.s. round plate of 300mm & 10mm thickness used to form a paddle assembly. nthe handle frame is of 25 nb made from b class g.i. pipe. nthe seat and back rests are fitted on the outer frames are made up of m.s. sheet of size 330 mmx300mmx2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20mm with no sharp edges. nthe foundation used for fixing is a structure and made from center pipe of g.i. of 80 nb b class welded with m.s. round palte of 250mm & 10mm thick main pipe supported with 25 x 25 mm m.s. angles of 3mm thickness and 20mm x 40mm crc square pipes of 3mm thickness. nclosing caps are made up of injection mounlded plastic lldpe / hdpe. npins used of diameter 25mm are made up from sae 8620 bright material. npins used of diameter 13mm are made up from enb material with crca pipe 20x20mm of thickness 3.00mm for paddleassembly. nthe bearing used are 6001zz & 6205zz permanent lubricated sealed sealed bearing of reputed brand. nhigh tensile steel with galvanized nuts and bolts are used for assembly. nthe circlip used for assembly are of a24 type. nthe powder coating done with pure polyester powders from ackzonoble or berger paints with 60 to 70 micron thickness. bi01010001010000000000000515bi0100001181 2 nos....

Due Date : April 09, 2021

Tender Value : ₹ Ref. Documents

View Tender
49
Central Public Works Department - Rajasthan

27508010 providing and fixing aluminum sheet on expansion joint of building and covering of paragola in gpra nirman vihar i, ii at sector 2, niraman vihariii at sector 3 and niramn parisar at sector7, vidhyadhar nagar, jaipur...

Due Date : March 31, 2021

Tender Value : ₹ 20.12 Lakhs

View Tender
50
Department Of Local Bodies - Rajasthan

27456569 tender for fire vehicle repair work , a ) spare parts , water pump empuler , water pump empuler shaft , water pump empular bearing , water pump packing , water pump o ring set , water pump main line betterfly valve , water pump fork , water pump oil seal important , water pump glaan , water pump shifter , water pump valve , water pump tickle , water pump side plate , water pump side valve , water pump valve nob , water pump suction gear gun metal , water pump suction gear gun metal , water pump hydraulic pipe , water pump pressure pipe , water pump cooling pipe reditor , water pump shaft coupling , water pump shaft yok , water pump shaft teeth , water pump shaft cross , water pump delivery valve , water pump main line pipe , water pump foundation , water pump rhls valve , water pump monitor seal kit , water pump monitor valve , water pump monitor nozzle , water pump glaan bush , water pump empuler bush , water pump bolt gun metal , water pump gun metal washer , water pump foundation bolt , pto bearing , pto gear main shaft , pto gear counter , pto counter bearing , pto gear oil seal , pto housing , pto fork , pto leaver , pto side plate , pto complete assembly , pto spring set , pto foundation , denger light solpin big , hooter assembly , speaker , denger light small , mouth , syran assembly , front glass jail , door glass jail , denger light jail big , water pump cable , denger light jail small , tire supply , forward side tire , backward side tire , battery supply , battery branded company , b ) labor work , water pump opening fitting labour , water pump empuler repair labour , water pump empuler opening fitting labour , water pump empuler shaft opening fitting labour , water pump empuler shaft repair labour , water pump main line wall opening fitting labour , water pump section gear opening fitting labour , water pump shifter gear opening fitting labour , water pump glan fitting labour , water pump shifter shaft repair labour , water pump head opening fitting labour , water pump head repair labour , water pump plate opening fitting labour , water pump front hosing repair labour , water pump rear hosing repair labour , water pump side wall opening fitting labour , water pump coupling opening fitting labour , water pump foundation opening fitting labour , water pump foundation repair labour , water pump butterfly wall opening fitting labour , water pump empuler centre hosing opening and fitting labour , water pump section hosing repair labour , water pump overflow wall opening fitting labour , water pump socket opening fitting labour , water pump main line university pipe opening fitting labour , water pump vaccum pump meter opening fitting labour , water pump meter repair labour , water pump pressure meter wall opening fitting labour , water pump pressure pipe opening fitting labour , water pump shaft coupling opening fitting labour , water pump shaft opening fitting labour , water pump radiator cooling wall opening fitting labour , water pump transfer gear shaft opening fitting labour , water pump transfer gear shaft repair labour , water pump transfer gear coupling opening fitting labour , water pump delivery wall opening fitting labour , water pump delivery wall coupling opening fitting labour , water pump delivery wall lock opening fitting labour , water pump main ball wall opening fitting labour , water pump main wall plate opening fitting labour , water pump main line pipe opening fitting labour , water pump main line pipe steel rod welding repair labour , water pump tank cap opening fitting labour , water fom tank wall opening fitting labour , water pump water tank opening fitting labour , water tank repair labour , water tank parda new fitting labour , water tank foundation new fitting labour , water tank foundation repair labour , water fom tank repair labour , water tank relief wall opening fitting labour , water tank over flow wall opening fitting labour , water tank coupling opening fitting labour , water tank over flow line pipe opening fitting labour , water tank shower opening fitting labour , water tank shower line pipe opening fitting labour , water tank rs side line pipe opening fitting labour , water tank rh side line wall opening fitting labour , water tank rh side wall coupling opening fitting labour , water tank meter assembly opening fitting labour , water tank monitor opening fitting labour , water tank monitor coupling opening fitt labour ing , water tank monitor mounting opening fitting labour , water tank monitor liver opening fitting labour , water tank monitor repair labour , water tank excelator wire repair labour , section controller opening fitting labour , rh side tool box opening fitting labour , rh side tool box lock opening fitting labour , rh side tool box repair labour , rh side aluminium sheet opening fitting labour , rh side rebeating labour , rh side tool box fersj checker plate opening fitting labour , rh side tool box angle support plate opening fitting labour , rh side tool box colour opening fitting labour , rh side tool box under sheet rebeating opening fitting labour , rh side tool box under sheet opening fitting labour , lh side tool box opening fitting labour , lh side tool box lock fitting labour , lh side tool box repair labour , lh side aluminmum sheet opening fitting labour , lh side rebeating labour , lh side tool box fresh checker plate opening fitting labour , lh side tool box angle support plate opening fitting labour , lh side tool box colour labour , lh side tool box under sheet rebeating labour , lh side tool box under sheet fitting labour , pto shaft repair labour , pto shaft opening fitting labour , pto gear opening fitting labour , pto hosing repair labour , pto body repair labour , pto gear garari repair labour , pto gear rod repair labour , pto foundation opening fitting labour , pto foundation repair labour , chhat complete rebeating labour , cabin rebeating labour , chhat checker plate opening fitting labour , fire chhat pipe opening fitting labour , fir chhat pipe cd stand repair labour , fire chhat hose real opening fitting labour , rear body rs side seat opening old jal opening new jal fitting welding with labour , rear body ls side seat opening old jal opening new jal fitting welding with labour , water tank checker plate opening old jal opening new jal fitting welding with labour , denger light opening and fitting labour charge , hooter speaker syran opening and fitting labour charges , frant glass jail opening fitting labour charges , door glass jail opening fitting labour charges , water pump cable new fitting labour charge , complete wiring repairing labour charge , cabin door repairing with labour charge...

Due Date : March 30, 2021

Tender Value : ₹ 10 Lakhs

View Tender