Military Engineer Services - Rajasthan

40896071 tender for provision of certain sanctioned works in zone b under ge banar; 1 surface excavation not exc. 30 cm deep and averaging 15cm deep and getting out in soft / loose soil complete all as specified. 2 excavation in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc n exc 10 sqm on plan and n exc 1.5m in depth and getting out any type of soil complete all as specified. 3 excavating in post holes ( or similar holes ) each n exc 0.5 cum, getting out, returing, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm watering and removing surplus soil to a distance n exc 50m and making and removing surplus soil to a distance n exc 50m and making good surface in hard / dense soil complete all as specified. 4 returning, filling in, including spreading, levelling, watering and wellramming in layers not exc 25cm in soft / loose soil complete all as specified. 5 removing excavated material n.exc. 50 m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified. 6 m&l cement concrete 1:4:8 type d2 ( 40mm graded stone aggregate ) in foundations, filling and mass concrete complete all as specified. 7 all as per ser item no 6.00 but pcc 1:3:6, type c2. 8 use & waste formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits ( if any ) of foundation and plinth beams; and similar work; vertical or to batter flat and rough finished surfaces of concrete complete all as specified. 9 use & waste formwork to edges of concrete flats, treads breaks in floors, window cills, concrete rallings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of rcc / pcc bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20 cm wide and rough finished surfaces of concrete complete all as specified. 10 use & waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick ( horizontal or sloping ) flat and rough finished surfaces of concrete complete all as specified. 11 m&l forrcc ( design mix ) m 25, using 20 mm graded stone aggregate in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete complete all as specified. 12 m&l forrcc ( design mix ) m 25, using 20 mm graded stone aggregate in beams, cantilevers, bressumers, lintels over 1.5m span complete all as specified. 13 m&l forprecast 1:2:4 rcc, using 20 mm graded stone aggregate in cover slab complete all as specified. 14 m&l forrcc ( design mix ) m 25, using 20 mm graded stone aggregate in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified. 15 m&l mild steel tmtbarsin reinforcement 10mm dia and overcut to length bent to shape required including crankingbindingspirally, hooping for columns hooking ends and binding with and including mild steel wire ( annealed ) not less than 0.9mm dia complete all as specified. 16 m&l mild steel tmt barsin reinforcement5mm dia and over up to 10mm dia in stirups andcut to length bent to shape required including crankingbindingspirally, hooping for columns hooking ends and binding with and including mild steel wire ( annealed ) not less than 0.9mm dia complete all as specified. 17 m&l for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, modular bricks in cement mortar built in cm 1:6 complete all as specified. 18 m&l for 15mm thick rendering in cm 1:4 mixed with wpc on fair faces of brick work or concrete surfaces of wall complete all as specified.note: wpc shall be measured and paid separately. 19 material and labour for preparation of newly plastered surface of walls and applying two coats of cement base paint over one coat of alkali resistance primer complete all as specified. 20 m&l for integral water proofing compound in external plastering complete all as specified. 21 m&l for preparation of newly plastered or unplastered surfaces of and applying three coats of white wash complete all as specified. 22 all as per ser item no 21.00 but on wall ceiling. 23 m&l for 100 mm thick cement concrete for sub base type d2, 1:4;8 ( using 40 mm graded aggregate ) complete all as specified. 24 m&l 25 mm thick cement concrete for sub base b 1, 1:2:4 ( 20mm graded aggregate ) complete all as specified. 25 m&l for non skid ceramic colour tiles ( 300 x 300 mm ) x 7 mm thick in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15mm thick bedding of cm 1:4 layer in floor finishes complete all as specified. 26 m&l for coloured glazed ceramic tiles in vertical surface 350x250x7mm / 450x350x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles in vertical surface including 10mm thick renderingin cm 1:4 complete all as specified. 27 m&l for hardcore of gauge n exc. 63mm ( broken stone or boulders ) , deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified. 28 m&l 75 mm thick pcc ( 1:3:6 ) type c1 ( by using 20mm aggregate ) in plinth protection and similar work complete all as specified. 29 s&f 125 mm long aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified. 30 s&f 100 mm long extruded aluminium alloy handles, fabricated type., anodised complete all as specified. 31 m&l solid pvc door frame of size 50mm x 47mm made out of 5mm plain colour pvc sheet reinforced with m.s square tube, supplying & fixing in opening as per specification complete all as specified. 32 m&l factory made solid panel of pvc door shutter 30mm thick ( style ) consisting of frame made out of m.s. tubes for top & bottom rails, m.s. frame shall be covered with heat moulded plain colour pvc `c channel heaving a pvc sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour pvc sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour pvc sheet to be fitted in the m.s frame wedded / sealed to the stiles, & rails with suitable pvc sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified. 33 s&f 100 mm long butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type b 21 complete all as specified. 34 s&f steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified. 35 s&f sheet glass 4 mm thick, figured glass, pin headed type and glazing with oil putty or wooden beads supplied with shutters in square n.exc 0.5 sqm in each pane complete all as specified. 36 m&l two coats of synthetic enamel paint over a red oxide primer including prepration of newly treated steel surfaces of girth exc 10cm complete all as specified. 37 all as per ser item no 36.00 but n.exc 10 cm width or girth. 38 s&f 15mm dia galvanized steel tubing, medium grade, with all fitting and fixed complete to walls celling or laid in floors complete all as specified. 39 s&f 20mm dia galvanized steel tubing, medium grade, with all fitting and fixed complete to walls celling or laid in floors complete all as specified. 40 all as per ser item no 39.00 but 25 mm bore. 41 m&l for vitreous china wash basin, white, flat back, size 550x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified. 42 m&l for vitreous china squatting pan, `orissa pattern, size 580 x440 mm white, with integral foot rests ( excluding flushing cistern and flush pipe ) complete all as specified. 43 m&l for pvc valveless, syphonic action type, flushing cistern, 10 ltr capacity, low level, white, with inlet, ball valve, float and handle including brackets and including flushing pipe 32 mm dia of bore, high density polyethylene pipes of pressure rating 6 kg / sqcm complete all as specified. 44 s&f pvc connections 15mm size with ptmt nuts of length 450mm complete all as specified. 45 m&l for 15mm dia of bore cast copper alloy stop valves, fancy type, chromium plated, screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed complete all as specified. 46 s&f 15mm pillar taps, cast copper alloy, with capstand heads, chromium plated, screwed down high pressure, with or without lettered hot or cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed to 15 mm size pipe complete all as specified. 47 s&f pvc waste pipe 32mm dia for whb complete all as specified. 48 s&f 15mm dia bib tap cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified. 49 m&l for 110mm pvc ( swr ) pipes, single socketed, in any length, with rubber rings joints, laid in trenches or in floors complete all as specified. 50 m&l for 75mm pvc ( swr ) pipes, single socketed, in any length, with rubber rings joints, fixed to walls complete all as specified. 51 m&l for 75mm dia of bore pvc ( swr ) floor trap plain with grating including jointing with solvent cement complete all as specified. 52 m&l for 110mm pvc ( swr ) bends any radius complete all as specified. 53 all as per ser item no 52.00 but 75 mm. 54 m&l for 75mm dia pvc ( swr ) vent cowl complete all as specified. 55 s&f 110mm pvc ( swr ) p trap complete all as specified. 56 m&l 110 mm pvc ( swr ) branch piece, single ( y ) equal or unequal complete all as specified. 57 cutting of bituminous / pcc / pqc road for laying of pipe line not exceeding 1.5 m depth / width inculding making good to distributed portion to match with existing road / path with pcc complete all as specified. 58 m&l 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick ac building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified. 59 s&f 500 litre capacity rotational moulded polyethylene water storage tanks ( cylinderical vertical with closed top ) hoisted and fixed in position all as specified in ssr part i including 20mm brass ball valve high pressure complete all as specified. 60 material and labour for square rubble walling jodhpur type regular course well bonded bedded and solidly hearted built in cement mortar ( 1:6 ) complete all as specified. 61 extra over on stone walling for hammer dressing to face stone with maximum depression on face from straight edge n.exc 20mm and dressing faces beds and joints as specified to square rubble walling regular course jodhpur type complete all as specified. 62 m&l for structural steel in roof trusses ( framed ) trussed, purlins, crane gantries, rails and fastening and heavy bracket framing ( beam, tee, angle, channel or flat sections ) including distance pieces, columns, cleats etc ) 63 s&f rolled sections as in fencing post or similar work fe 410w ( gde e 250 ) quality a complete all as specified. 64 s&f pre painted galvalume aluminium zinc coating gi based corrugated steel sheet 0.50mm of an colour having tensile strenght of 550 mpa as in roof covering / cladding to wall fixed with self tapping screws complete all as specified. 65 s&f pre painted galvalume aluminium zinc coating gi based plain steel sheet 0.50mm of an colour having tensile strenght of 550 mpa as in roof covering / cladding to wall fixed with self tapping screws complete all as specified. 66 mild steel screw bolts ( machine made ) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut n exc 15 cm long dia of shank 11 to 15 mm complete all as specified. 67 m&l for sand filling under floor including watering and consolidation 25 mm thick complete all as specified. 68 m&l for glossy finished machine pressed precast concrete interlocking paver block any shape and size conforming to is 15658 2006 of 60 mm thickness m 35 grade with white cement glossiness in pigments and laid in position / patterncomplete all as specified. 69 m&l for pre cast concrete block as in kerb stone ( machine made ) with solid blocks type b1, 1:2:4 ( 20mm graded stone aggregate ) exc 10 cm in width and setting in cement mortar 1:4 complete all as specified. 70 pcc ( 1:4:8 ) type d2 using40mm graded crushed stone aggregatein concretebedding to drain pipes, including packing under and haunching against the sidesof pipes after they are laid and tested complete for 150mm bore pipe complete all as specified. 71 m&l reinforced concrete pipes 150mm bore, class np 2, laid and jointed complete all as specified. 72 m&l precast cement concrete block masonary with solid block of ( 1:4:8 ) type d2 exc 10 cmin width & setting in cm ( 1:6 ) complete all as specified. 73 m&l cement concrete ( 1:2:4 ) type b1 using 20 mm graded crushed stone aggregate in surface channels or drains and benching including finishing the top of benchingeven and smooth using extra cement complete all as specified. 74 extrafor formingfairfinisheddrain orchannel 30cminner girth in cementconcreteusing extracementincluding forms, moulds, mitred / stoppedends etc complete all as specified. 75 add to srl item no. 74.00 above for each 25mm girth or part thereofover 30cm. 76 m&l rendering 5 mm thick in cement mortar 1:3 on caling / roof projection / chajja complete all as specified. 77 m&l for pcc 1:2:4 type b 1 as in coping incl necessary form work complete all as specified. 78 m&l for keyed pointing in cm 1:3 to squared rubble, coursed or uncoursed stone masonary complete all as specified. 79 m&l for rendering screed bed or bedding layer of mortar 10 mm thick in cm 1:3 as in floor / roof to be finished smooth without using extra cement mixed with water proofing compound as per manufacturer instruction complete all as specified. 80 m&l for moorum / red bajri filling in floors or pavings, spreading and levelling in layers and well ramming including watering as required complete all as specified. 81 s&f viterous china bowl urinal flat back, size 465x355x265 mm white ( minimum ) , with grating and union for discharge pipe ( excluding flushing cistern, flush pipe and waste pipe ) complete all as specified. 82 s&f viterous china urinal partition white of size 310x700 mm complete all as specified. 83 m&l for urinal spreader of ptmt any colour for fixing with 15 mm dia pipe ( minimum weight 60 gms ) complete all as specified. 84 s&f for 32 mm bore waste coupling of ptmt ( half full threaded ) ( minimum weight 32 45 gms / 40 60 gms ) complete all as specified. 85 cutting into existing manholes for connecting new drains ( internal dia of pipe 150 mm ) making good to pipe and rendering, cutting out existing benching for and forming branch channel ( 1 / 2 round or 3 / 4 section ) in cement concrete 1:2:4 type b 1 smooth finished and reforming benching complete all as specified. 86 m&l for providing polythene film, black, 200 micron laid in floors complete all as specified. 87 m&l for cement concrete work in pavement / hardstanding of flexural strength, 40 kg / per square centimeter in field using 400 kg of cement per cubic meter thickness of concrete upto 20 cm complete all as specified. 88 m&l for finishing surfaces with brooming complete all as specified. 89 m&l for forming contraction ( dummy ) joints 65mm deep x 10mm wide and filled with sealing compound grade a complete all as specified. 90 m&l plain cement concrete 1:2:4 type b 1 using 20 mm graded stone aggregate asin cast in situ in lintels up to 1.5 m span, cills and other similar bands, plinth courses, parapets, copings, bed plates and the like including weathering, slightly rounded or chamfered angles and throating as directed including use and waste of form work complete all as specified. 91 supply only ms galvanized chain link fencing of size 100mmx100mm square mesh of 10 gauge type complete all as specified. 92 fixing only chain link fencingincluding line wires, any mesh, size andy type of standards, rails, straining bolts etc. complete including provision of binding wire complete all as specified. 93 m&l galvanized, 2 strand, steel barbed wire, 2.24 mm dia barbed with 2 mm dia barbs at 75 mmspacing and straining and fixing to any type of standard rails, straining boltsincluding securing or tying atcrossing with and provision of galvanized ms wire staples or steel pins etc ( each line wire to be measured ) complete all as specified. 94 m&l for point wiring of one light point controlled by one, one way switch complete with any length using approved colour coding as per is, with stranded copper conductor 1.5 sq.mm ( nominal area ) , single core, pvc insulated and unsheathed stranded frlscable 1100 volts grade, isi 694 marked, in pvc rigid conduits heavy duty isi marked totally concealed in wall / floor / roof including all accessories etc. with sunken boxes suitable for mounting switches / sockets etc. and pvc insulated stranded copper conductor 1.5 sq.mm single core cable as earth and connecting to common earth dolly complete all as specified for the following: note ( i ) cutting in chases and pointing in will be done by contractor without any cost. ( ii ) making good of distrubed surfaces matching with existing finishes will be done by contractor without any extra cost. 95 one 5 pin 5 amp socket outlet point on same board with other switches including earth wire. 96 s & f piano flush type switch 5 amps single pole all as specified. 97 s & f multipurpose socket outlet with piano flush type 3 pin 5 amps all as specified. 98 s&f ceiling rose surface type three terminalscomplete all as specified. 99 s & f led lights fitting 1x 20w, 220v, ac decorative box type with driver, holder including led tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified. 100 supply and fixing earthing complete with gi earth plate eletrode 60 cm x 60 cm x 6.0 mm thick barried directly in ground vertically to a depth note less than 2.25 metres below ground level with top edge of earth plae at a depth note less than 1.5 metres below level ground, connected to gi iron or steel earth wire 4 mm dia ( 8 swg ) by means of nuts , bolts checks nuts, washers andearth wire protected by gi iron pipe 15 mm bore, medium grade and connected to main switch board or main control board as directed and including concrete pit in pcc ( 1:3:6 ) type c1, pre cast rcc coverslab 30cmx30cmx10cm with one lifting handle made of 8mm dia ms bar funnel wire mesh, 20mm bore gi or steel pipe medium grade for watering, charcoal or coke and salt in alternate larges, necessary excavatin and earth work in any type of soil complete all as shown electrical plate no 3 of mes schedule part i and testing after completion. 101 s&f mcb spn db 4 way, double door, with 200 amp rated busbar 240 v, complete all as specified. 102 supply and fixing mcb sp 6 32 amp 240 volts. 10 k complete all as specified. 103 mcb spn32 amp 240volt c series 10ka complete all as specified. 104 s & f led lights fitting 1x 10w, 220v, ac decorative / mirror type type with driver, holder including led tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. 105 drilling ofwater pipe line of any type and size upto 50 mm size for connection of 25 / 20 mm gi pipe with clamp and other assesries complete all as specified. 106 supply and fixing 20 mm bore gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe, non rising forged brass spindle class i and fixed with required necessary gi fittings complete all as specified. 107 all as per ser item no 105.00 but 15 mm. 108 all as per ser item no 105.00 but 25 mm. 109 m&l for clean, dry sand in trenches / ducts for cushioning to cable complete all as specified. 110 supplying and laying pcc cable cover, flat, class lv, type 2 of size 300mm x 180mm x 40mm complete all as specified. 111 supply laying and testing cable xlpe insulated, screened, pvc bedded galvanised steel strip or wire armoured, electric power cables ( heavy duty ) 1100 volts grade with standed allumiuium conductor of size 10 sqmm 2 core complete all as specified. 112 supply and lay galvanised medium grade including fitting 40 mm dia with all fittings laid in trenches / floor complete all as specified. 113 supply and fix heavy duty metal bodyexhaust fan 300 mm sweep, including louvers, grounting with nut bolts complete all as specified. 114 s & f led security lightluminaries 35 watt complete with all accessories andwall mounting bracket of suitable size including clamps, nut bolts etc. prewired complete all as specified....

Military Engineer Services - Rajasthan

40876286 tender for periodical services including certain b / r and e / m repair work to various ascon nodes under age b / r ii at suratgarh mil stn ; 1 demolition of brick work, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed by engineer in charge. 2 dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing ) and rubbish off the premises complete all as specified and directed by engineer in charge. 3 dismaintling of wall and ceiling boards ( fibre, pulp, insulation, etc. ) or insulation boards / slabs / blankets, any thickness, including cover fillets including cover fillets complete all as directed by engineer in charge. 4 dismantling asbestos cement sheet ( corrugated, semi corrugated etc ) as in roofs etc including ridges complete all as specified and directed by engineer in charge. 5 dismantlig of timber scantling unframed work under 40 sqcm in section as in fillets, rails, posts, rafters, purlins in any position complete all as specified and directed by engineer in charge. 6 taking down steel window / ventilator of any description and of any type with or without guard bars and making good the disturbed portion complete all as specified and directed by engineer in charge. 7 taking down cement plaster or cement lime plaster on stone surface / brick surfaces of walls including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed by engineer in charge. 8 taking down chowkat or frame with shutters including fitting and fixtures area not exc 1.5 sqm each ( without taking off the wooden shutters from the frame ) including cutting holes for hold fasts and making good disturbed surface with cement mortor or pcc after fixing new chowkats complete all as specified and directed by engineer in charge. 9 taking down chowkat or frame with shutters including fitting and fixtures area exc 1.5 sqm but not exc 4 sqm each ( without taking off the wooden shutters from the frame ) including cutting holes for hold fasts and making good disturbed surface with cement mortor or pcc after fixing new chowkats complete all as specified and directed by engineer in charge. 10 taking down and refixing door shutters of any description having area exc 1.00 sqm but not exc 2.00 sqm, each in the same opening including easing of door / window / cup board shutters for easy closing / opening incl tighening of hinges or changing the position of hinges adjustment of tower bolts, sliding bolts etc complete all as specified and directed by engineer in charge. 11 supply only integral water proofing compound ( isi marked ) complete all as specified and directed by engineer in charge. 12 m & l for plain cement concrete ( 1:3:6 ) type c 1 using 12.5mm graded stone aggregate as in filling of pressed steel frame, chowkats, hold fast blocks and other similar items etc complete all as specified and directed by engineer in charge. 13 m&l for brick work with sub class ‘b’ old size burnt bricks, straight or curved on plan exc 6m mean radius built in cement mortar ( 1:6 ) complete all as specified and directed by engineer in charge. 14 m&l for 30mm thick flush shutter solid core construction with block board core & ply wood face panels, commercial type on both faces complete all as specified and directed by engineer in charge. 15 s&f 35mm thick factory made glazed and skeleton shutters made of second class hard wood ( bonsum / hollock ) , open rebated and prepared to receive glass, gauze etc ( without sash bars ) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in ssr part i section 8 clause 8.24 ( a ) kiln seasoned and chemically pressure treated fixed to chowkat complete all as specified and directed by engineer in charge. 16 s&f factory made solid pvc door frame of size 50mm x 47mm made out of 5mm thick plain colour pvc sheet reinforced with ms square tube complete all as specified & shown in relevant drawing of item no. 08095 in mes schedule ( part ii ) and directed by engineer in charge 17 s&f 30mm thick factory made solid core pvc door shutter ( style ) consisting of frame made out of mild steel tubes for top and bottom rails, mild steel frame shall be covered with heat moulded plain colour pvc sheet, c channel having pvc sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour pvc sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail; panelling of plain colour pvc sheet to be fitted in mild steel frame welded / sealed to the styles and rails with suitable pvc sheet beading and joined together with solvent cement, complete, all as specified & shown in relevant drawing of item no. 08080 in mes schedule ( part ii ) and directed by engineer in charge. 18 s&f 200 mm long aluminium anodized barrel tower bolts of extruded section ( isi marked ) complete all as specified and directed by engineer in charge. 19 s&f as in repair 200 mm long aluminium anodized barrel tower bolts of extruded section ( isi marked ) complete all as specified and directed by engineer in charge. 20 s&f as in repair 150 mm long aluminium anodized barrel tower bolts of extruded section ( isi marked ) complete all as specified and directed by engineer in charge. 21 s&f 100mm size mild steel butt hinges cold rolled medium weight ( isi marked ) complete all as specified & directed by engineer in charge. 22 s&f as in repair 100mm size mild steel butt hinges cold rolled medium weight ( isi marked ) complete all as specified & directed by engineer in charge. 23 s&f 100mm size butt hinges of extruded aluminium alloy with galvanized mild steel hinge pin, anodized type b 21 ( isi marked ) complete all as specified and directed by engineer in charge. 24 s&f as in repair 100mm size butt hinges of extruded aluminium alloy with galvanized mild steel hinge pin, anodized type b 21 ( isi marked ) complete all as specified and directed by engineer in charge. 25 s&f 300mm long aluminium alloy anodised sliding door bolts with hasp, staple ( bolt type ) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy ( isi marked ) complete all as specified & directed by engineer in charge. 26 s&f as in repair 300mm long aluminium alloy anodised sliding door bolts with hasp, staple ( bolt type ) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy ( isi marked ) complete all as specified & directed by engineer in charge. 27 s&f 150mm long extruded aluminium handles, anodised, fabricated type ( isi marked ) complete all as specified and directed by engineer in charge 28 s&f as in repair 150mm long extruded aluminium handles, anodised, fabricated type ( isi marked ) complete all as specified and directed by engineer in charge 29 s&f as in repair galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staple complete all as specified and directed by engineer in charge. 30 s&f as in repairs powder coated mild steel drapery rod of 20 mm inner dia ( in lengths as directed ) of approved colour with & including decorative finial at both ends and pair of powder coated mild steel brackets fixed at both ends with pvc rawl plug & steel screws on walls / beam, including pvc curtain rings of matching colour @ 10cm c / c all as specified & as directed. 31 s&f as in repair mild steel 300mm, ordinary rat tail rod patttern springs including roller & roller plate fixed to wooden frame or welded to steel frame making suitable cut out in wall and making good in cm 1:4 complete all as specified and directed by engineer in charge. 32 s&f as in repair pvc strips for wooden shutter for insects / dust proofing complete all as specified and directed by engineer in charge 33 m&l for mild steel roof trusses ( framed ) , trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing ( beam, tee, angle, channel or flat sections ) including distance pieces, cleats etc complete all as specified and directed by engineer in charge. 34 s&f factory made steel window with side hung shutters including projecting type hinges with steel handle, steel peg stay, fixing lugs etc complete with glazing bars including one shop coat of red oxide primer and cutting holes in brick wall built in cement mortar for inserting lugs and making good dismantled portion in cement mortor ( 1:3 ) or cement concrete ( 1:2:4 ) type b i complete all as specified & directed by engineer in charge 35 s&f factory made steel ventilator with top hung shutter including hinges, steel peg stay, handle including one shop coat of zinc chromate primer and cutting holes in brick wall built in cement mortar for inserting lugs and making good dismantled portion in cement mortor ( 1:3 ) or cement concrete ( 1:2:4 ) type b i complete all as specified and directed by engineer in charge. 36 s&f pressed steel frames for door of size 125x60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc made out of mild steel sheet of 1.25mm thickness complete all as specified and as directed. 37 s&f pressed steel frames for door of size 105x60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc made out of mild steel sheet of 1.25mm thickness complete all as specified and as directed. 38 m & l for pre painted galvalume aluminum zinc coating gi based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed by engineer in charge. 39 m & l for pre painted galvalume aluminum zinc coating gi based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed by engineer in charge. 40 s&f as in repair 18 / 19 mm thick prelaminated particle board exterior grade, prelaminated both sides with decorative choice lamination fixed with screws to timber frame including 6mm thick teak wood lipping fixed with head less nails / screws for shelves / partition / pelmet boxes / kitchen cabinet / cupboard shutter complete all as specified and directed by engineer in charge. 41 s&f as in repair anodised aluminium snap grid frame work of size 605mm x 605mm for false ceiling including necessary notching. the snap grid shall consist of anodized aluminium main & cross tee of size 36.5mm x 25mm x 1.4mm weighing 0.24 kg / rm and 23.5mm x 26.4mm x1.40mm weighing 0.191kg / rm respectively. the main and cross tee shall be jointed at junction crossing with anodized aluminium angle bracket of size 15mm x 15mm x 1.5mm weighing 0.12kg / rm fixed with suitable ms bolts, nuts and washer. the snap grid ( main / cross tee section ) shall be supported at ends all along the wall with anodized aluminium angle of size 35mm x 25mm x 2mm weighing 0.36 kg / rm fixed to wall with suitable arrangement duly suspended with 3mm dia gi wire length as required @ 600mm c / c with adjustable device including plugging in brick / concrete work with steel raw plugs including making good all the disturebed portion complete all as specified and directed by engineer in charge. 42 m&l for 8mm thick non asbestos fibre cement building boards fixed or laid / inserted to timber / gi / aluminium framework with screws complete all as directed. & directed by engineer in charge. 43 m&l for non skid ceramic joint free coloured tiles 7 to 8mm thick ( square / rectangular ) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar ( 1:6 ) complete all as specified and directed by engineer in charge. 44 m&l for non skid ceramic joint free coloured tiles 7 to 8mm thick ( square / rectangular ) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick rendering in cement & sand mortar ( 1:4 ) complete all as specified and directed by engineer in charge. 45 m&l for glazed ceramic tiles ( coloured ) 450mm x 350mm x 7mm thick on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick rendering in cement & sand mortar ( 1:4 ) including necesary cutting as per site requirment complete all as specified and directed by engineer in charge. 46 m&l for vitrified ceramic light shade ( as approved ) coloured tiles 10mm thick ( square / rectangular ) , polished, area of each tile not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar ( 1:4 ) complete all as specified and directed by engineer in charge. 47 m&l for 15mm thick rendering in cement mortar ( 1:4 ) on brick walls / concrete surfaces mixed with water proofing compound as per manufacturer’s instructions including finishing the surfaces even and smooth without using extra cement complete all as specified and directed by engineer in charge.note : supply only water proofing compound shall be measured and paid for separately under respective item of boq. 48 m&l for 10mm thick rendering in cement mortar ( 1:6 ) on fair faced surface of brick masonary or concrete surface of walls, finished even & smooth without using extra cement complete all as specified and directed by engineer in charge. 49 m&l for rough cast finish plaster with a mixture consisting of crushed stone or fine gravel aggregate mixed with coarse sand and cement in the ratio of 1:1:1 over & including 12mm thick rendering in cement mortar 1:3 on fair faces of brick masonry or concrete surfaces of walls complete all as specified and directed by engineer in charge. 50 m&l for preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed by engineer in charge. 51 m&l for preparation of newly plastered surface of walls & applying two coats of cement base paint of approved shade / tint and filling cement based putty in cracks complete all as specified and directed by engineer in charge. 52 m&l for preparation of old decorated, plastered or pointed surfaces of ceiling by brooming down or steel wire brushing, scrapping down smoke soot moulds, moss and efflorescent, salts and treating oil & greasy spots etc and applying one coat of white wash complete all as specified & directed by engineer in charge. 53 m&l for preparation of old decorated, plastered or pointed surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot moulds, moss and efflorescent, salts and treating oil & greasy spots etc and applying two coat of white wash complete all as specified & directed by engineer in charge. 54 m&l for preparation of old decorated, plastered or pointed surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot moulds, moss and efflorescent, salts and treating oil & greasy spots, washing, rubbing down and stopping of distempered surface etc and applying two coat of distemper oil emulsion complete all as specified & directed by engineer in charge. 55 m&l for preparation of new plastered and unplastered surfaces of wall and applying two coats of oil bound distemper including alkali resistant priming preparatory to distempering complete all as specified & directed by engineer in charge. 56 m&l for preparation of old decorated plastered or unplastered surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot mulds, moss and efflorescent, salts, filling of cracks etc and applying a coat of cement based paint complete all as specified & directed by engineer in charge. 57 m&l for preparation of new wooden or wood based surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by engineer in charge. 58 m&l for preparation of old painted wooden or wood based surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by engineer in charge. 59 m&l for preparation of old painted steel and iron surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint of approved tint complete all as specified and directed by engineer in charge. 60 hacking out old broken glass any thickness, size, quality or description from wooden / metal frame and punching or drilling out old glazing pins / spring clips complete all as specified and directed by engineer in charge. 61 s&f 3mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane including painting / oiling to new putty to match with the existing / new surfaces, complete all as specified and as directed. 62 s&f 4mm thick figured glass pin head type and glazing with oil putty in square not exc 0.5 sqm in each pane complete all as specified and directed by engineer in charge. 63 taking up or down 15mm dia, steel tubing & connections including cleaning for refixing or removal to store complete all as specified and directed by engineer in charge. 64 s&f 15mm bore galvanized steel water tubing medium grade with & including all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed by engineer in charge. 65 taking up or down 20mm dia, steel tubing & connections including cleaning for refixing or removal to store complete all as specified and directed by engineer in charge. 66 s&f 20 mm bore galvanized steel water tubing medium grade with & including all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed by engineer in charge. 67 s&f as in repair gun metal globe or gate valve 20mm bore with iron wheel head, screwed both ends for iron pipes complete all as specified and directed by engineer in charge. 68 s&f as in repair ptmt swivel shower rose of any colour with swivel joints including shower arm of 15mm bore, 195 mm long with bend of 45 degree with flanges of ptmt ( complete minimum weight 80 grams ) complete all as specified & directed by engineer in charge. 69 s&f as in replacement 600mm long pvc connection suitable for 15 mm bore with ptmt nuts on both sides complete all as specified and directed by engineer in charge. 70 s&f as in repair rotational moulded polyethylene water storage tank isi marked ( cylindrical vertical three layered with closed top ) hoisted and fixed in position of capacity 500 litres including ball brass valve, high pressure with polythene float and flynut screwed for 20 mm dia gi pipe, 25mm bore gi washout pipe 15 cm long fitted with check nut, 20mm bore over flow pipe 1.50 metre long fitted with brass anti mosquito nest coupling at the end of over flow pipe & 15mm bore gi air vent pipe 1.30 metre long fitted with tee at the end of air vent pipe ( all gi pipes shall be medium grade ) complete all as specified and directed by engineer in charge. 71 all as per srl item no. 70 here in before but 1000 ltrs capacity 72 s&f as in repair 15 mm bore bib tap, cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed by engineer in charge. 73 s&f as in replacement ball valves, high pressure of ptmt with epoxy coated aluminum rod & high density plastic ball, screwed for iron pipe 15mm dia ( minimum weight 210 gms ) complete all as specified and as directed by engineer in charge. 74 s&f as in repair vitreous china wash basin white flat back of size 630 x 450mm including a pair of angle iron brackets, pvc connection of size 450mm, 15mm dia fancy type, cast copper alloy chromium plated pillar tap with capastan head screwed down high pressure with long screwed shank and fly nuts, 32mm dia full threaded ptmt waste coupling and 32mm dia waste pipe including cutting for and pinning in ends of brackets and 32mm dia high density polythelene ( hdpe ) pipes for pressure rating 6 kg / sqcm with all fittings such as sockets, bends, tapers, etc complete all as specified and directed by engineer in charge. 75 s&f as in repair vitreous china squatting pan orissa pattern, white of size 580x440mm with integral foot rests ( excluding flushing cistern and flush pipe ) including cast iron p or s trap, pcc filling and connection to trap and flushing pipe, antisyphonage pipe etc complete all as specified and directed by engineer in charge. 76 s&f as in repairs vitreous china wash down water closet pan ( pedestal pattern ) , white including connection to drain ( or outgoing pipe ) and to flushing pipe, anti sypohonage pipe etc. & with plastic wc seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device and jet spray complete all as specified & as directed by engineer in charge. 77 s&f as in repair 10 litre capacity pvc valveless symphonic action type low level flushing cistern ( isi marked ) including 32 mm dia pvc flush pipe connected to water closet with inlet, ball valve, float and handle complete all as specified and directed by engineer in charge. 78 s&f as in repair vitreous china half stall type, flat back urinal of size 390 x 375 x 590mm, white including providing & fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with & including 60 mm long brass screws, pointing around urinal back in cement, with & including ptmt grating and union for discharge pipe, chromium plated urinal spreader including waste pipe of polythelene of low or high density or pvc 32mm dia complete all as specified and directed by engineer in charge. 79 s&f as in repairs pvc waste pipe 32 to 40mm bore suitable for whb or sink complete all as specified and directed by engineer in charge. 80 s&f as in repair 600mm x 450mm beveled edge looking mirror of selected quality glass not less than 5.5mm thick, mounted on 6mm thick commercial plywood including pvc moulded framing and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed by engineer in charge. 81 s&f as in repair 100mm bore cast iron sand cast soil, waste and vent pipe in any length with or without ears fixed with cement joints, laid in trenches or in floor complete all as specified & directed by engineer in charge.note : cost of excavation & earthwork is deemed to included to in the unit rate of this items nothing extra shall be paid on this account. 82 s&f 100mm bore cast iron bends ( any radius ) , diminishing pieces or tapers ( larger bore measured ) with oval access door complete all as specified and as directed by engineer in charge. 83 m&l as in repair 100mm dia cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete ( 1:2:4 ) type b 1 using 20mm graded stone aggregate complete all as specified and directed by engineer in charge. 84 s&f in replacement 110mm bore pvc ( swr ) pipes single socketed in any length jointed with adhesive fixed to walls fixed with and including requisite number of clamps made out of flat iron 25x4mm complete all as specified and as directed by engineer in charge. 85 s&f in replacement 75mm bore pvc ( swr ) pipes single socketed in any length jointed with adhesive fixed to walls fixed with and including requisite number of clamps made out of flat iron 25x4mm complete all as specified and as directed by engineer in charge. 86 s&f 110 mm bore pvc ( swr ) bends any radius jointed with adhesive complete all as specified and as directed by engineer in charge. 87 s&f 75 mm bore pvc ( swr ) bends any radius jointed with adhesive complete all as specified and as directed by engineer in charge. 88 s&f in repair stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100mm pvc pipe complete all as specified and directed by engineer in charge 89 s&f in repair stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 75mm pvc pipe complete all as specified and directed by engineer in charge 90 taking down carefully or drawn out from conduit, existing copper / aluminium point wiring for light, fan, bell, socket, power point etc complete including fixture and fittings such as switches, sockets, ceiling rose, pendent holder, light fittings, top sheet covers, fan regulators, mcb, db, lamp, earth plug etc ( excluding ms sunken boxes ) and making good the disturbed surfaces of wall / ceiling complete all as specified and as directed by engineer in charge. note : taking down of serviceable fittings shall be measured and paid separately. 91 m&l for point wiring complete with 1.5 sqmm ( nominal cross sectional area ) frlsh pvc insulated multistandard unsheathed copper conductor cable with colour coding drawn in and including new pvc rigid conduit medium grade 20mm dia and suitable fittings, fixed onconcealed or above ceiling with accessories such as pipe hooks, elbows, junction box, terminated in new sunken box and covered with new 3mm thick bakelite plastic laminated sheet top cover fixed flush with wall using brass screws & cup washers including cutting chases in wall for conduits and making good the disturbed surfaces of wall and including 1.5 sqmm pvc insulated unsheathed multistandard copper conductor wire as earth continuity to common earth and connecting to earth dolly for one light point, fan point controlled by one way switch complete all as specified and directed by engineer in charge. 92 all as per serial item no. 91 here in before but for one 3 pin 5 amp socket outlet on the same board with other switches. 93 all as per serial item no. 91 here in before but for one 3 pin 5 amp socket outlet on independent board. 94 all as per serial item no. 91 here in before but for one bell or buzzer point controlled by by one push button on independent board. 95 all as per srl item no. 91 above, but wiring with cable of cross sectional area 2.5 sqmm ( nominal area ) multi stranded copper conductor frlsh, pvc unsheathed cable 1100 volts shade for one switch socket combination 6 pin, 5 / 15 amps on independent board including 2.5 sqmm pvc insulated multistandard unsheathed copper conductor wire as earth continuity to common earth dolly. 96 m&l for point wiring complete with 1.5 sqmm ( nominal cross sectional area ) frlsh pvc insulated multistandard unsheathed copper conductor cable with colour coding drawn in open conduit or existing concealed conduit in existing sunken box and covered with new 3mm thick bakelite plastic laminated sheet top cover fixed flush with wall using brass screws & cup washers including cutting chases in wall for conduits and making good the disturbed surfaces of wall and including 1.5 sqmm pvc insulated unshethed multistandard copper conductor wire as earth continuity to common earth and connecting to earth dolly for one light point, fan point, bell point controlled by one switch complete all as specifiedand directed by engineer in charge. 97 all as per serial item no. 96 here in before but for one 3 pin 5 amp socket outlet on the same board with other switches. 98 all as per serial item no. 96 here in before but for one 3 pin 5 amp socket outlet on independent board. 99 all as per serial item no. 96 here in before but for one light point controlled by two way switches. 100 all as per serial item no. 96 here in before but for one bell or buzzer point controlled by by one push button on independent board. 101 all as per srl item no. 96 above, but wiring with cable of cross sectional area 2.5 sqmm ( nominal area ) multi stranded copper conductor frlsh, pvc unsheathed cable 1100 volts shade for one switch socket combination 6 pin, 5 / 15 amps on independent board including 2.5 sqmm pvc insulated multistandard unsheathed copper conductor wire as earth continuity to common earth dolly. 102 s&f switch piano flush button 5 amps single pole, one way complete all as specified and directed by engineer in charge. 103 s&f switch piano flush button 5 amps single pole, two way complete all as specified and directed by engineer in charge. 104 s&f switch piano flush button 15 amps single pole, one way complete all as specified and directed by engineer in charge. 105 s&f socket outlet 3 / 5 pin, 5 amps 240 volts, flush type complete all as specified and directed by engineer in charge. 106 s&f socket outlet 3 / 5 pin, 15 amps 240 volts, flush type complete all as specified and directed by engineer in charge. 107 s&f bell push, flush type, 5 amp, 230 volts grade complete all as specified and directed by engineer in charge. 108 s&f lamp holder, insulated body with back plate etc complete all as specified and as directed by engineer in charge. 109 s&f ceiling rose surface bakelite 65mmx50mm with two or three terminal complete all as specified and directed by engineer in charge. 110 s&f electric bell ( ding dong ) , ac, 230 volts, single pole & connecting up complete all as specified and directed by engineer in charge. 111 s&f electronic fan regulator suitable for ceiling fan 1200mm / 1400mm sweep, socket size, rotary type complete all as specified and directed by engineer in charge. 112 s&f sheet metal plug & socket db, sp, with a two pin and earth plug with socket, 230 volts with & including one mcb sp ‘c’ curve 10 ka, 20 amps complete all as specified and directed by engineer in charge. 113 s&f energy efficient decorative ultra slim, prewired, maxoled batten for t 8 led retro lamp, polycarbonate body, 1.2m length, ultra bright, glass shell, glare free, wide angle single / double side connection retrofit led tube with g 13 lamp holder / patti 20 watt led light fitting ( day cool light ) including 20 watt led tube with all accessories prewired fixed on wall / hanging complete all as specified and as directed by engineer in charge. make : havells cat part no lhfxcenntn1w020 & lhlddcxcml8q020 / crompton cat part no dijb12lt8 20 & lgt8 16 865 2 or equivalent cat part no of makes mentioned in appendix a here in after. 114 s&f energy efficient decorative ultra slim prewired 9 / 10watt ( 600mm length ) led light fitting ( mirror light ) ( day cool light ) , surface and wall mounted led batten, extruded aluminium housing with polycarbonate diffuser & integrated electronic driver and all accessories fixed on wall / hanging complete all as specified and as directed by engineer in charge. make : havells cat part no lumilinebs9wled865s pcwh / syska cat part no ssk t5t 9w / crompton cat part no lctln 10 cdl or equivalent cat part no of makes mentioned in appendix a here in after. 115 s&f energy saving 9 / 10 watt environmental friendly, ultra modern, energy saving, surface mounted, decorative oval bulk head edge lit led luminaire comprising of high brightness leds, ip 65 protection fixed on wall complete all as specified and as directed by engineer in charge. make : havells cat part no hexaft10wled857ssy mbopc / syska cat part no ssk bh 9w / crompton cat part no lbhe 10 cdl or equivalent cat part no of makes mentioned in appendix a here in after. 116 supply and fixing led lamp minimum 3 star rated 10w led b 22 base complete all as specified and directed by engr in charge with following specifications ( a ) lumen system efficacy of lamp should be minimum 100 lumen per watt. ( b ) input voltage range : 140 to 270 volts ( c ) temp operating range : minus 10°c to plus 45°c ( d ) power factor : minimum 0.90 ( e ) cri: morethan80 117 supply, fixing and testing led street / security light fitting of 25 watt, 5700k 6500 k ( including led drive and internally prewired ) complete with body robust, corrosion resistant, superior finish and without any cracks or through holes, made in a single piece by high pressure die cast aluminum alloy. the luminaries shall be monolithic construction totally enclosed dust and water proof with ip 65 / 66 protection as per is 10322 1982 ( part i ) with latest amendments and input voltage range 140 300 v, ac, frequency 50 60 hz , p.f should be more than 0.9 with total harmonic distortion thd ( i ) less than 15% , cool white colour and lamp starting time should not be more than 10 second including 10 kv surge protection in built or external. driver should be constant current constant voltage driver. driver should have high voltage withstanding capacity upto 300 v, ac. driver should also have double phase protection, no load , open circuit and short circuit protection .led light fitting should be suitable for ambient temperature from 10 degree centigrade to 50 degree centigrade and humidity level 10% to 90 % rh. covers should be polycarbonate / toughened glass to ensure minimum ip 65 degree protection. cover should not degrade due to heating and ageing. the efficiency of led luminaries system shall be more than 100 lumens per watt and must be certified by the lm 79 test report and including connection for street light from pole box with 1.5 sqmm, 3 core pvc insulated stranded copper conductor frlsh cable, 1100 volts grade isi marked including addition / alteration in bracket ( if required ) for fixing light fitting complete all as specified and directed by engineer in charge. 118 notes for srl item no 117 : ( a ) tenderer shall submit test report of led street light fitting from government accredited test laboratory for lm 79 and lm 80 . ( b ) contractor has to furnish a replacement warranty of 05 years for led light fittings complete including lamps from the date of completion of ca. contractor shall obtain warranty from the manufacturer of product on their letter head and submit the same to deparment alonwith his letter head. the product will be replaced free of cost in the following case : ( i ) manfacturing defects ( ii ) failure due to mechanical and electrical impact. ( iii ) drop in lumen ( or lux at 1 m ) below 90% of clamied values of lumen ( or lux at 1 m ) of the led / luminaries. ( c ) all led light / luminare must meet the provision laid down in is 16101 , 16102 part i / ii , 16103 part i , 16104 , 16105 , 16106 , 16108 / 2012 and 15885 part ii / section 13. ( d ) scope of work shall include supply and fixing street light fittings on street light bracket fixed on poles, if street light fitting requires to fixed on existing street light bracket and any addition alterration required in bracket for fixing street light, in that case cost of additional / alteration is included in the unit rate of this item, which also includes needfult & p andrequired accessories such as 1.5 sqmm, 3 core pvc insulated stranded copper conductor cable for connection from pole box to light fitting etc complete including making connection, testing etc complete .no extra payment is admissible on this account. ( e ) light fittings shall be provided with 10 kv surge protection as mentioned in description of item. if 10 kv surge protection is not provided in light fitting for which cat part is mentioned in boq. contractor has to provide light fitting with 10 kv surge protection without any extra cost to department. ( f ) contractor shall write ca no on street light fitting with synthetic enamel paint which should be visible from ground level. cost of the same is included in the unit rate of this item nothing shall be extra paid on this account. 119 s&f as in repair flush mounting factory made spn db 4 way, 240 volt, double door, ip 43 protection, ik 09 with metal door with 100 amps copper bus bar, with neutral bar, earth bar and cables ties for cable management fully insulated bus bar complete all as specified and directed by engineer in charge. 120 s&f as in repair flush mounting factory made spn db 8 way, 240 volt, single door, ip 43 protection, ik 09 with metal door with 100 amps copper bus bar, with neutral bar, earth bar and cables ties for cable management fully insulated bus bar complete all as specified and directed by engineer in charge. 121 s&f as in repair flush mounting factory made tpn db 4 way, 415 volt, double door, ip 43 protection, ik 09 with metal door with 160 amps copper bus bar, with 02 neutral bar, 02 earth bar and cables ties for cable management fully insulated bus bar complete all as specified and directed by engineer in charge. 122 s&f mcb 6 to 32 amps, single pole 240 volts, 10 ka, ‘c’ curve, complete all as specified and directed by engineer in charge. 123 s&f as in repair mcb 40 63 amps, single pole & neutral 240 volts, 10 ka, ‘c’ curve, complete all as specified and directed by engineer in charge. 124 s&f as in repair mcb 63 amps, triple pole & neutral 240 volts, 10 ka, ‘c’ curve, complete all as specified and directed by engineer in charge. 125 s&f as in replacement switch piano flush button 5 amps single pole, one way complete all as specified and directed by engineer in charge. 126 s&f as in replacement switch piano flush button 5 amps single pole, two way complete all as specified and directed by engineer in charge. 127 s&f as in replacement switch piano flush button 15 amps single pole, one way complete all as specified and directed by engineer in charge. 128 s&f as in replacement bell push, flush type, 5 amp, 230 volts grade complete all as specified and directed by engineer in charge. 129 s&f as in replacement socket outlet 3 / 5 pin, 5 amps 240 volts, flush type complete all as specified and directed by engineer in charge. 130 s&f as in replacement socket outlet 6 pin, 15 amps 240 volts, flush type complete all as specified and directed by engineer in charge. 131 s&f as in replacement lamp holder, insulated body with back plate etc complete all as specified and as directed by engineer in charge. 132 s&f as in replacement ceiling rose surface bakelite 65mmx50mm with two or three terminal complete all as specified and directed by engineer in charge. 133 s&f as in replacement switch socket combination 3 pin, 15 amps, 240 volts, flush type complete all as specified and directed by engineer in charge. 134 s&f as in replacement electric bell ( ding dong ) , ac, 230 volts, single pole & connecting up complete all as specified and directed by engineer in charge. 135 s&f as in replacement electronic fan regulator suitable for ceiling fan 1200mm / 1400mm sweep, socket size, rotary type complete all as specified and directed by engineer in charge. 136 s&f as in repair 3mm thick phenolic laminated sheet cover of size 8 x 5 for provn fixing of switch & socket & regulartor fixed with machine screws / washer complete all as specified and directed by engineer in charge. 137 s&f as in repair 3mm thick phenolic laminated sheet cover of size 9 x 5 for provn fixing of switch & socket & regulartor fixed with machine screws / washer complete all as specified and directed by engineer in charge. 138 s&f as in repair 3mm thick phenolic laminated sheet cover of size 9 x 11 for provn fixing of switch & socket & regulartor fixed with machine screws / washer complete all as specified and directed by engineer in charge. 139 s&f as in repair 3mm thick phenolic laminated sheet cover of size 11 x 5 for provn fixing of switch & socket & regulartor fixed with machine screws / washer complete all as specified and directed by engineer in charge. 140 s&f as in replacement energy efficient decorative ultra slim, prewired, maxoled batten for t 8 led retro lamp, polycarbonate body, 1.2m length, ultra bright, glass shell, glare free, wide angle single / double side connection retrofit led tube with g 13 lamp holder / patti 20 watt led light fitting ( day cool light ) including 20 watt led tube with all accessories prewired fixed on wall / hanging complete all as specified and as directed by engineer in charge. make : havells cat part no lhfxcenntn1w020 & lhlddcxcml8q020 / crompton cat part no dijb12lt8 20 & lgt8 16 865 2 or equivalent cat part no of makes mentioned in appendix a here in after. 141 s&f as in replacement energy efficient decorative ultra slim prewired 9 / 10watt ( 600mm length ) led light fitting ( mirror light ) ( day cool light ) , surface and wall mounted led batten, extruded aluminium housing with polycarbonate diffuser & integrated electronic driver and all accessories fixed on wall / hanging complete all as specified and as directed by engineer in charge. make : havells cat part no lumilinebs9wled865 spcwh / syska cat part no ssk t5t 9w / crompton cat part no lctln 10 cdl or equivalent in makes mentioned in appendix a here in after. 142 s&f as in replacement energy saving 9 / 10 watt environmental friendly, ultra modern, energy saving, surface mounted, decorative oval bulk head edge lit led luminaire comprising of high brightness leds, ip 65 protection fixed on wall complete all as specified and as directed by engineer in charge. make : havells cat part no hexaft10wled857ssy mbopc / syska cat part no ssk bh 9w / crompton cat part no lbhe 10 cdl or equivalent in makes mentioned in appendix a here in after. 143 supply and fixing in replacement led lamp minimum 3 star rated 12w led b 22 base complete all as specified and directed by engr in charge with following specifications ( a ) lumen system efficacy of lamp should be minimum 100 lumen per watt. ( b ) input voltage range : 140 to 270 volts ( c ) temp operating range : minus 10°c to plus 45°c ( d ) power factor : minimum 0.90 ( e ) cri: morethan80 144 s&f in replacement led post top 40 watt decorative circular design energy saving, ip 65 protection environmental freindly, long life aesthetically designed with symmetrical light distribution, cast aluminium body landscape luminaire with high power leds with polycarbonate type diffuser including two coat of black painting on existing post and cement work in base stand ( spigot housing with decorative opal acrylic diffusser and ip 65 protection with all accessories complete all as specified and as directed by engineer in charge. 145 s&f in replacement sub main wiring complete with 2 single core 6 sqmm ( nominal area ) multi stranded copper conductor pvc insulatedunsheathed cable frlsh drawn in and including heavy duty pvc conduit isi marked not less than 25mm dia concealed including single core multistranded copper conductor 6 sqmm size cable as earth continuity wire drawn in same conduit complete all as specified and directed by engineer in charge note :two runs of 6 sqmm single core cable and one run of 6 sqmm copper wire earth continuty conductor and conduit with fittingsshall be measured as one length. 146 supply, fixing and testing as in replacement led bldg / security light fitting of 25 watt, 5700k 6500 k ( including led drive and internally prewired ) complete with body robust, corrosion resistant, superior finish and without any cracks or through holes, made in a single piece by high pressure die cast aluminum alloy. the luminaries shall be monolithic construction totally enclosed dust and water proof with ip 65 / 66 protection as per is 10322 1982 ( part i ) with latest amendments and input voltage range 140 300 v, ac, frequency 50 60 hz , p.f should be more than 0.9 with total harmonic distortion thd ( i ) less than 15%, cool white colour and lamp starting time should not be more than 10 second including 10 kv surge protection in built or external. driver should be constant current constant voltage driver. driver should have high voltage withstanding capacity upto 300 v, ac. driver should also have double phase protection, no load , open circuit and short circuit protection .led light fitting should be suitable for ambient temperature from 10 degree centigrade to 50 degree centigrade and humidity level 10% to 90 % rh. covers should be polycarbonate / toughened glass to ensure minimum ip 65 degree protection. cover should not degrade due to heating and ageing. the efficiency of led luminaries system shall be more than 100 lumens per watt and must be certified by the lm 79 test report and including connection for street light from pole box with 1.5 sqmm, 3 core pvc insulated stranded copper conductor frlsh cable, 1100 volts grade isi marked including addition / alteration in bracket ( if required ) for fixing light fitting complete all as specified and directed by engineer in charge. 147 notes for srl item no 145 : ( a ) tenderer shall submit test report of led street light fitting from government accredited test laboratory for lm 79 and lm 80 . ( b ) contractor has to furnish a replacement warranty of 05 years for led light fittings complete including lamps from the date of completion of ca. contractor shall obtain warranty from the manufacturer of product on their letter head and submit the same to deparment alonwith his letter head. the product will be replaced free of cost in the following case : ( i ) manfacturing defects ( ii ) failure due to mechanical and electrical impact. ( iii ) drop in lumen ( or lux at 1 m ) below 90% of clamied values of lumen ( or lux at 1 m ) of the led / luminaries. ( c ) all led light / luminare must meet the provision laid down in is 16101 , 16102 part i / ii , 16103 part i , 16104 , 16105 , 16106 , 16108 / 2012 and 15885 part ii / section 13. ( d ) scope of work shall include supply and fixing street light fittings on street light bracket fixed on poles, if street light fitting requires to fixed on existing street light bracket and any addition alterration required in bracket for fixing street light, in that case cost of additional / alteration is included in the unit rate of this item, which also includes needfult & p andrequired accessories such as 1.5 sqmm, 3 core pvc insulated stranded copper conductor cable for connection from pole box to light fitting etc complete including making connection, testing etc complete .no extra payment is admissible on this account. ( e ) light fittings shall be provided with 10 kv surge protection as mentioned in description of item. if 10 kv surge protection is not provided in light fitting for which cat part is mentioned in boq. contractor has to provide light fitting with 10 kv surge protection without any extra cost to department. ( f ) contractor shall write ca no on street light fitting with synthetic enamel paint which should be visible from ground level. cost of the same is included in the unit rate of this item nothing shall be extra paid on this account. 148 s&f as in repair capacitor of 3.15 mfd capacity, 230 volts including provision of insulation sleeves isi marked complete all as specified and directed by engineer in charge. 149 s&f as in replacement plug top 3 pin, 5 amp, 230 volt ac complete all as specified and as directed by engineer in charge. 150 s&f as in replacement plug top 3 pin, 15 amp, 230 volt ac complete all as specified and as directed by engineer in charge. 151 m&l for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6mm thick burried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of earth plate at a depth of not less than 1.5 metre below ground level, earth plate surrounded by 15cm thick and packed layer of charcoal dust and common salt, connected to earth lead of gi wire 4 mm dia ( 8 swg ) by means of bolts, nuts and washers of the earth wire galvanised iron or steel and thimbles and other end of the earth wire connected to earthing test point and protected by galvanised iron pipe light grade 15mm dia and water pipe 20mm dia gi light grade top of pipe with funnel & wiremesh, and bottom connected to earth plate by slit and two bolts / nuts / washers, pcc chamber in cement concrete ( 1:2:4 ) type b 1 and 40mm thick rcc cover, excavation & earth work complete all as shown in electrical plate no. 3 of mes schedule part i of ssr 2009 including taking down old eathing complete all as specified and directed by engr in charge.notes : ( i ) cost of gi wire upto 7.5m is included in this item. ( ii ) pcc 1:2:4, excavation, earthwork is included in the quoted rate of this item. ( iii ) cost of gi tubing upto 7.5m is included in the quoted rate of this item. ( iv ) outer edge of earth pit chamber shall be 1.5 metre away from the outer edge of pcc chamber. ( v ) minimum weight of reinforcement for rcc cover shall be 1 kg. 152 supplying and fixing as in repair 1100 volts grade heavy duty cable pvc insulated solid aluminium conductor, served with inner sheathing of pvc tape and overall pvc sheathed in service connections in and including wherere required pvc conduit 20mm diaof 6 sqmm, one twin core cable flat or circular complete all as specified and directed by engineer in charge.notes : ( i ) excavation, earth work, sand cushioning, cable protection inlcuded in this item. nothing shall be extra paid on this account. ( ii ) road cutting / floor cutting / cutting holes etc in walls required for laying / fixing of cable etc shall be made good as per existing. nothing extra shall be admissible on this account. quoted rates shall deemed to be inclusive of the above provisions. 153 s&f as in repair switch socket combination 3 pin, 5 amps, 240 volts, flush type complete all as specified and directed by engineer in charge. note : a sum of rs. 68575 / will be deducted on account of credit for dismantled / demolished / taken down material. please refer details on srl page no. 28 to 30 ( schedule of credit ) of tender documents....

Military Engineer Services - Rajasthan

40874623 tender for special repair of qtr 57 and 60 ( offers md accommodation ) of certain unit at mil station kota. ; 1 demolition / dismantling of existing roof treatment, any type from rcc roof slab including lime concrete / pcc padding over roof, removing layer of bitumen under lime concrete / pcc padding, cement mortar, felt etc and cleaning the surface by hacking to receive plaster and removing demolished materials outside md land, complete all as specified and directed. 2 demolition / dismantling of existing roof treatment, any type from rcc sunken slab including lime concrete / pcc filling materials around wc upto top of existing sunken slab, removing layer of bitumen under lime concrete / pcc sunken, cement mortar, felt etc and cleaning the surface by hacking to receive plaster and removing demolished materials outside md land, complete all as specified and directed. 3 taking down cement plaster of any description and thickness on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed. 4 taking down chowkhat or frames not exc 1.50 sqm each with shutters ( with out taking off shutters from the frame ) , complete all as specified and directed. 5 taking down chowkhat or frames exc 1.50 sqm and not exc 4.00 sqm each with shutters ( with out taking off shutters from the frame ) , complete all as specified and directed. 6 takingdown shutters of any description exc 1 sqm and not exc 2 sqm each and removing from site complete all as specified and directed. 7 takingdown shutters of any description exc 2 sqm each and removing from site complete all as specified and directed. 8 takingdown and re fixing after rescuring or easing and adjusting of any description exc 1 sqm & n. exc 2 sqm each in the same opening complete all as specified and directed. 9 takingdown and re fixing after rescuring or easing and adjusting of any description exc 2 sqm each in the same opening complete all as specified and directed. 10 demolition of cement concrete ( un reinforced ) of any description and in any position not otherwise specifically provided for and removing rubbish from premises ( distance exc 1.5 km but not exc 5 km ) , complete all as specified and directed. 11 demolition of cement concrete ( un reinforced ) in ground floor and pavings n.exc 15 cm thickness ( below or above gl ) and removing rubbish from premises ( distance exc 1.5 km but not exc 5 km ) , complete all as specified and directed. 12 demolition of cement concrete ( reinforced ) as in roofs, floors ( other than ground floors ) , beams, staircases, landing, chajjas and similar suspended work for and removing rubbish from premises ( distance exc 1.5 km but not exc 5 km ) , complete all as specified and directed. 13 dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed. 14 demolition of stone slabs and tiles of any description or thickness in floors etc, laid, bedded and pointed in any mortar, complete all as specified and directed. 15 dismantling floor, hearth or wall tiling / terrazzo including cement mortar bedding ( but not backing ) , removing tiles and rubbish off the premises, complete all as specified and directed. 16 demolition of brick work or stone / boulder masonry built in cement mortar including all quoins, arches, pillars etc. but excluding ashlars facing, dressed stone work & precast concrete articles, complete all as specified and directed. 17 providing and injecting chemical emulsion for post constructional antitermite treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sqm of the vertical surface of the sub structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete all as specified and directed. 18 treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 ( 1 cement: 2 coarse sand ) to match the existing floors complete all as specified and directed. 19 m&l brick work with old size pulverized fuel ash lime bricks ( fly ash bricks non modular size ) , straight or curved on plan exc 6 m mean radius, built in cm 1:6, complete all as specified and directed. 20 m&l for brick work with pulverised fuel ash lime bricks ( fly ash bricks non modular size ) , straight or curved on plan to any radius in half brick walls built in cement mortar 1:4, complete all as specified and directed. 21 m&l for pcc 1:3:6 type c 2 ( using 40mm graded stone aggreate ) , 75 mm thick as in plinth protection / path / pcc paving etc including finishing the surface even & smooth without using extra cement, with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering where dirtected and providing 6 mm wide joints throughout the thickness of plinth protection duly filled with mastic filling ( one part of hot bitumen 85 / 25 and three parts of fine sand by weight ) , complete all as specified & directed. 22 m&l for 100mm thick plain cement concrete 1:3:6 type c 2 ( using 40 mm graded crushed stone aggregate ) as in flooring / sub base finished surface even & fair to receive floor finishes / screed complete all as specified and directed. 23 m&l for 50mm thick plain cement concrete 1:2:4 type b 2 ( using 40 mm graded crushed stone aggregate ) as in flooring finished surface even & smooth without using extra cement complete all as specified and directed. 24 m&l providing cement concrete 1:2:4 type b 1 using 20 mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating & formwork, complete all as specified and directed. 25 m&l providing cement concrete 1:2:4 type b 1 using 20 mm graded stone aggregate as in roof kerbs or mud stops, rounded or chamfered on edges, complete all as specified and directed. 26 s & f 40mm gi pipe, medium grade, 60cm long out of which 20cm projected outside for spout pipe, placed in slope to drain water accumulated in sunken portion including making good in cm 1:3 for the damaged portion complete all as specified and directed. 27 m&l for pcc 1:2:4 mix type b 0 ( using 12.5 mm graded crushed stone agg ) for roof padding, leveling course to receive floor finishes etc, complete all as specified and directed. 28 m&l brushing neat cement slurry with 3.00 kg cement per sqm, complete all as specified and directed. 29 m&l for applying 15 mm thick screed in cm 1:4 on roof slabs with using liquid water proofing compound as per manufacturers instructions, complete all as specified and directed. ( liquid wpc shall be measured and paid separately ) . 30 m&l for cleaning of roof slab including picking, sweeping clean and washing down with water to remove dust, dirt etc and supply and fix app polymeric water proofing membrane, minimum 3mm thick and weighing not less than 3.0 kg / sqm, black finish reinforced with non woven polyester matt, with a thermo fusable finish laid over cold applied bituminous primer conforming to is 3384 @ of 0.40 kg / sqm torching overlaps with a propane or a butane gas torch, with a overlap of 75mm at the sides and 100mm at the ends and sealing including applying a coat of cold emulsion bituminous primer all as per manufacturer’s instructions, complete all as specified and directed. note: ( i ) coved fillets in pcc ( 1:2:4 ) type b 0 using 12.5mm graded stone aggregate, of radius 75mm shall be provided at the junction of roof and parapet wall / mumty / chimney / other vertical surfaces and thereafter surface painted with hot paving bitumen of grade 30 / 40 confirming to is 73, applied@1.20 kg / sqm over a coat of cold applied bituminous primer conforming to is:3384 @ 0.40 kg / sqm. 31 item 30.00 contd........ ( ii ) polymeric membrane shall be taken to a height of 45cm ( minimum ) and then inserted inside the groove of parapet wall of brick masonry and shall be finished by a membrane flushing. ( iii ) the waterproofing treatment shall be got carried out by the manufacturer or their authorized applicators. ( iv ) in case of stone masonry parapet wall etc a groove of size 25mmx25mm ( minimum ) shall be made in coved fillet at the junction of roof and parapet wall / mumty chimney / other vertical surfaces and polymeric membrane inserted in groove and sealed with paving bitumen. ( v ) cost of above aspects is deemed to be included in quoted rates. 32 m&l for cleaning of walls and floor of sunken portions including picking, sweeping clean and washing down with water to remove dust, dirt etc and supply and fix app polymeric water proofing membrane, minimum 3mm thick and weighing not less than 3.0 kg / sqm, black finish reinforced with non woven polyester matt, with a thermo fusable finish laid over cold applied bituminous primer conforming to is: 3384 @ 0.40 kg / sqm, torching overlaps with a propane or a butane gas torch with an overlap of 75mm at the sides and 100mm at the ends and sealing including applying a coat of cold applied bituminous primer all as per manufacturer’s instructions, complete all as directed.note: ( i ) the waterproofing treatment shall be got carried out through the manufacturer or their authorized applicators only. 33 supply only approved liquid water proofing compound, complete all as specified and directed. 34 s&f 35mm thick factory made iind class hard wood ( hollock ) paneled door shutters two panel with lock rail and panel of 9mm b.w.p. marine grade plywood bonded with high quality liquid phenol formaldehyde synthetic resin adhesive conforming to is 710 or 12mm thick particle board veneered with commercial veneering on both faces. the size of rails & style as specified in ssr part i ( 2009 ) section 8 and as per is 1003 ( part i ) kiln seasoned as per is 1141 and chemically pressure treated as per is 401 complete all as specified and directed. 35 s&f 35mm thick factory made iind class hard wood ( hollock ) glazed and skeleton, open rebated, prepared to receive glass, gauge etc, without sash bars, edges of framing plain, chamfered and rounded, fitted with cut and mitered beads for securing glass / gauge etc. the size of rails & style as specified in ssr part i ( 2009 ) section 8 and as per is 1003 ( part i ) kiln seasoned as per is 1141 and chemically pressure treated as per is 401 complete all as specified and directed.note : s & f glass / gauge shall be measured and paid for separately. 36 m&l in renewal of 18 / 19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed. 37 s&f in renewal of factory made pressed steel cupboard shutters alongwith frame, frame made of 1.25 mm thick pbi sheet and shutter made of 1.00 mm thick pbi sheet with 6 nos 3.15 mm thick and 100 mm long steel hinges per shutter, godrej pattern locking arrangement with 12 mm dia vertical rod and lock with duplicate key & chrome finish handle, duly spray painted in factory with two coats of synthetic enamel paint over a coat of red oxide zinc chromate primer, complete with fastener, hold fast etc as required at site, complete all as specified and directed. ( total width including frame shall be measured for payment purpose ) . 38 s&f in renewal of 18 mm thick hdwpc ( high density wooden plastic composite ) kitchen cupboard / door shutter board, one side colour / white laminate and other side decorative as in modular kitchen / cabinet door shutters fixed with minifix hardware where ever required & including edge band 22 mm wide 0.80m thick of matching colour on exposed surfaces of board fixed with polymaster adhesive including trimming edges of edge band to true line of thickness of board by manual trimmer, fixed to wall etc, complete all as specified and directed. 39 s&f in renewal of 18 mm thick hdwpc ( high density wooden plastic composite ) board of both side white laminate as in back kitchen and other side un decorative as in back of kitchen cabinet / partition of cupboard etc, complete all as specified and directed. 40 s & f in renewal continuous ( piano ) hinges, stainless steel, matt or brush finish, width of flaps ( when open ) in 40mm complete all as specified and directed. 41 s&fof ball catches with 8 mm dia steel ball and brass body and striking plate including letting in and fixed, complete all as specified and dirceted. 42 s&f ss handles, fancy type, 100 mm size, complete all as specified and directed. 43 s & f auto closing hinges, three dimentional adjustment with suitable mounting plate made of stainless steel with nickel plated for corrosion resistance for cupboard and cabinet shutters of kitchen, complete all as specified and directed. 44 s & f in renewal of kitchen basket cutlery stainless steel of size 435mmx510mm & including ss guide channel etc, complete all as specified and directed. 45 s & f in renewal of kitchen basket plate rack stainless steel of size 435mmx510mm & including ss guide channel etc, complete all as specified and directed. 46 s & f in renewal of kitchen basket utensils stainless steel of size 435mmx510mm & including ss guide channel etc, complete all as specified and directed. 47 s&f of floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor, overall length of cover plate 140 mm, complete all as specified and directed. 48 s&f aluminium anodised barrel tower bolt of extruded section 150 mm long and fixed, complete all as specified and directed. 49 s&f aluminium handles, cast type, anodised 100 mm size, complete all as specified and directed. 50 s&f aluminium handles, cast type, anodised 150 mm size, complete all as specified and directed. 51 s&f 100 mm sizemild steel butt hinges, isi marked, medium weight, cold rolled and fixed with screws, complete all as specified and directed. 52 s & f 250 mm long aluminium alloy, anodised sliding door bolts ( isi marked ) with bolt not less than 16mm dia with hasp, staple ( bolt type ) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections of cast aluminium alloy and fixed complete all as specified and directed. 53 s&f 300 mm long mild steel ordinary rat tail rod pattern springs including roller and roller plate, welded to mild steel frame complete all as specified and directed. 54 s&f snake guard ( door seal aluminium plate with rubber beading ) for door etccomplete all as specified and directed. 55 supply only stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples, fixed to door, window, ventilator etc complete all as specified and directed. ( note: cost of fixing of wire cloth shall be deemed included in the unit rates under respective items. ) 56 s & f for solid pvc door frame of size 50mm x 47mm made out of 5mm plain colour pvc sheet reinforced with m.s. square tube, suppling & fixing in opening as per specification & drawing as applicable to item 08095 given in ssr part – ii ( 2020 ) . 57 s & f for factory made solid panel pvc door shutter 30 mm thick ( style ) consisting of frame made out of m.s. tubes for top & bottom rails mild steel frame shall be covered with heat moulded plain colour pvc ‘c’ channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour pvc sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour pvc sheet to be fitted in the m.s. frame welded / sealed to the stiles & rails with suitable pvc sheet beading, and joined together with solvent cement, suppy and fixing in the frame at site complete all as per specifications and drawings as applicable to item 08080 given in ssr part–ii. 58 providing and fixing factory made upvc white colour sliding window ( area not exceeding 2.00 sqm each ) , three track made of extruded profiles with wall thickness of 2.3mm ( + 0.2mm ) . window profile with hollow section with multi chamber. frame ( 88mm x 52mm ) , sliding sash ( 42mm x 67mm ) . sliding mesh sash ( 42mm x 57mm ) sliding interlock ( one vertical length in each shutters ) ( 45.5mm x 28mm ) , glazing bead ( 24.5mm x 16mm ) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. epdm gasket, 1.2+ 0.2mm thick galvanised steel frame ( 30mm x 18mm ) 2 nos, sliding sash ( 30mm x18mm ) , sliding mesh sash ( 26mm x 10mm ) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, hardware.touch lock of zinc alloyed ( white powder coated ) , steel roller system. stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories etc., complete all as specified and directed.note : ( i ) the unit rate quoted by contractor includes cost of glass and ss steel wire cloth and includes all other connected accessories. net opening will be measured for payment purpose. ( ii ) provision for fixing the ac and cooler shall be included in rate quoated by the bidder, no payment shall be made on this account and no misunderstanding entertained in later stage. ( iii ) bidder shall note that all the accessories ( packing, hinges, handles etc ) of upvc window shall be maintained by manufactureres till defect libility period and quoated rate shall be included this provision. 59 supply and fixing factory made upvc white colour fixed glazed window / ventilator made of ( small series ) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension ( area upto 0.75 sqm. ) comprising of upvc multi chambered frame and mullion ( where ever required ) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length ( shape & size according to upvc profile ) , upvc extruded glazing beads of appropriate dimension, epdm gasket, g.i. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. profile of frame shall be mitred cut and fusion welded at all corners, mullion ( if required ) shall be also fusion welded including drilling of holes for fixing hardwares and drainage of water etc. after fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality including provision of exhaust fan etc., complete all specified and directed. note : ( i ) for upvc frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. ( ii ) the unit rate quoted by contractor includes cost of glass and ss steel wire cloth and includes all other connected accessories. net opening will be measured for payment purpose. ( iii ) provision for fixing the exhaust fan shall be included in rate quoated by the bidder, no payment shall be made on this account and no misunderstanding entertained in later stage. ( iv ) bidder shall note that all the accessories ( packing, hinges, handles etc ) of upvc window / ventilator shall be maintained by manufactureres till defect libility period and quoated rate shall be included this provision. 60 s&f factory made steel windows conforming to is 1038 with side hung shutters & including box type hinges, with 2 nos steel handles, 2 nos tower bolts & steel pag stay complete ( without glazing bars ) , dovetailed or welded including fixing of lugs in pcc 1:2:4, type b 1, using 20mm graded stone aggregate & making good walls & cills to match the existing and including one coat of red oxide / zinc chrome primer complete all as specified and directed.note : ( i ) ss or ms cloth wire shall be measured and paid for sepparately under respective items. ( ii ) window size and pattern wherever required and directed shall be suitable for installing desert cooler. 61 s&f factory made steel ventilator with top hung shutter including hinges, steel peg stay and including one coat of red oxide / zinc chrome primer complete all as specified and directed. 62 s&f factory made steel ventilator with fixed type shutter without glazing bars including hinges, steel peg stay and including one coat of red oxide / zinc chrome primer complete all as specified and directed. 63 welding in repairs thickness of metal to be welded not exc 6mm and length of welding exc 2.5 cm but not exc 5cm complete all as specified and directed. 64 s&f sheet glass 3 mm thick ordinary quality and glazing with oil putty etc in squares n.exe 0.50 sqm in each pane, complete all as specified and directed. 65 s & f of framed work as in doors or gates of angles or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with including either hooks and hinges or steel hanging door fittings ( excluding of steel sheeting or other covering running rails and guides ) and hanging also fastening and fixing, conforming to fe 290 grade e 165, complete all as specified and directed. 66 s&f mild steel framed work as in grills, grating etc. with end of bars shouldered and / or riveted, or forged into spikes: framed guard bars: barred iron doors: ladders: cages, frame balusters: walk ways: railing: frame work of water tanks and similar works conforming to fe 290 grade e 165, complete all as specified and directed. 67 m & l for cutting holes in brick / stone masonary walls in cement mortar exc. half brick but not exc. one brick for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type b 1 as required, complete all as specified and directed. 68 dismantling plain or corrugated steel sheeting, any gauge, any thickness incl hooks and ridge as retrieved from site complete all as specified and directed. 69 s&f pre painted galvalume aluminium zinc coating gi based corrugated steel sheet, 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering, wall cladding etc, fixed to iron / wooden members with self drilling zincoulium coated metal screws having cap with rubber and metal washers, complete all as specified and directed. 70 re fixing only pre painted galvalume aluminium zinc coating ( gi based corrugated steel sheet, 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering, wall cladding etc, fixed to iron / wooden members with self drilling zincoulium coated metal screws having cap with rubber and metal washers, complete all as specified and directed.note : pre painted galvalume aluminium zinc coating sheets obtained from dismantling shall be reused under this item. 71 s&f in renewal of stainless steel tubular curtain rods, 25 mm dia, with fixing brackets and one pair of decorative end caps etc, complete all as specified and directed. 72 m&l 100 mm thick pcc 1:4:8 type d 2, using 40 mm graded crushed stone aggregate, as in sub base of floors, etc., finished surface even & fair to receive floor finishes / screed complete all as specified and directed. 73 m&l machine pressed precast concrete interlocking paver block any shape and size made with grey cement and pigment, confirming to is 15658 2006 of 60 mm thickness, m 35 grade, laid over and including 25 mm thick sand cushioning, complete all as specified and directed. 74 m&l for 25mm thick plain cement concrete 1:2:4 type b 1 ( using 20 mm graded crushed stone aggregate ) as in flooring / sub base finished surface even & fair to receive floor finishes / screed complete all as specified and directed. 75 m&l for joint free non skid ceramic coloured tiles, 7 to 8mm thick ( square / rectangular ) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles, laid over and including 15 mm thick screed bed in cm 1:6, complete all as specified and directed. 76 m&l for light coloured vitrified tiles, 10mm thick ( square / rectangular ) area of each tile not exceeding 0.36 sqm ( 600x600mm ) , in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles, laid over and including 15 mm thick screed bed in cm 1:6, complete all as specified and directed. 77 m&l for light coloured vitrified tiles, 10mm thick ( square / rectangular ) area of each tile not exceeding 0.36 sqm ( 600x600mm ) , fixed on vertical surfaces, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles, laid over and including 10 mm thick rendering in cm 1:4 backing, complete all as specified and directed. 78 m&l glazed ceramic coloured tiles on vertical surfaces 350x 250x7 mm / 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, laid over and including 10 mm thick rendering in cm 1:4 backing, complete all as specified and directed. 79 m&l for machine cut kota stone slab as in flooring 20 to 25 mm thick and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing andmirror polishing by applying wax polish, laid over and including 15 mm thick screed bed in cm 1:4, complete all as specifiedand directed. 80 m&l for machine cut kota stone slab as in skirting, dado, risers etc, 20 to 25 mm thick and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing and mirror polishing by applying wax polish, laid over and including 15 mm thick rendering in cm 1:4, complete all as specifiedand directed. 81 m&l for grinding of the existing marble / kota stone flooring by mechanical process using corborundum stone of appropriate grit, cleaning & finally mirror polishing by applying wax polish complete all as specified and directed. 82 m&l black granite ( of any type ) slab 18 20 mm thick, table rubbed and mirror polished by applying wax polish as in cooking platform, jambs, cills, pillars, tread, risers, platform for whb etc including bull nosing to exposed outer edges, set in cm 1:4 bedding and pointing with white cement mixed with pigment and provn of hole for gas pipe, laid over and including 20 mm thick screed bed in cm 1:6, complete all as specified and directed.note : granite stone slab shall be laid in single piece with rounding of edges and a grove shall be provided beneath the projection portions of slab. 83 m&l for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6, surface finished even and smooth without using extra cement, complete all as specified and directed. 84 m&l for rendering 15 mm thick on stone masonry surfaces or other than fair faces of brick work in cement mortar 1:6, surface finished even and smooth without using extra cement, complete all as specified and directed. 85 m&l for rendering 15 mm thick on stone masonry surfaces or other than fair faces of brick work in cement mortar 1:4 ( using water proofing compound as per manufacturers instructions ) , surface finished even and smooth without using extra cement, complete all as specified and directed. ( liquid wpc shall be measured and paid separately ) . 86 m&l for rendering 5 mm thick on fair faces of ceiling in cement mortar 1:3 including finishing the surface even and smooth, complete all as specified and directed. 87 m&l for preparing new steel surfaces exceeding 10cm width or girth and applying two coats of synthetic enamel paint over & including one coat of red oxide zinc chrome primer, complete all as specified and directed. 88 m&l for preparing old steel surfaces exceeding 10cm width or girth and applying two coats of synthetic enamel paint, complete all as specified and directed. 89 m&l applying 2 coats of synthetic enamel paint over and including a coat of pink primer on wooden surfaces, exceeding 10 cm in width or girth, incl preparation of the new surfaces complete all as specified and directed. 90 m&l applying two coats of synthetic enamel paint on wooden surfaces, exceeding 10 cm in width or girth, incl preparation of the old surfaces complete all as specified and directed. 91 m&l preparation of newly plastered surfaces of walls and applying wall care putty of 1 mm thickness over plastered surface to prepare the surface even and smooth and applying two coats distempering with 1st quality acrylic distemper ( ready mixed ) having voc content less than 50 gms / litre, of approved manufacturer, of required shade and colour complete, as per manufacturers specification over new surfaces on walls complete all as specified and directed. 92 m&l for complete removal of existing treatment from previously treated plastered / unplastered surfaces of walls and applying wall care putty of 1 mm thickness over plastered surface to prepare the surface even and smooth and applying two coats distempering with 1st quality acrylic distemper ( ready mixed ) having voc content less than 50 gms / litre, of approved manufacturer, of required shade and colour complete, as per manufacturers specification over new surfaces on walls complete all as specified and directed. 93 m&l preparation of newly plastered surfaces of walls and applying two or more coats of 100% premium acrylic emulsion paint having voc less than 50 gm / litre and uv resistance as per is 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade ( company depot tinted ) with silicon additives @ 1.43 litre / 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre / 10sqm over new surfaces over new surfaces on walls complete all as specified and directed. 94 m&l for complete removal of existing treatment from previously treated plastered / unplastered surfaces of walls and applying two or more coats of 100% premium acrylic emulsion paint having voc less than 50 gm / litre and uv resistance as per is 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade ( company depot tinted ) with silicon additives @ 1.43 litre / 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre / 10sqm over new surfaces over new surfaces on walls complete all as specified and directed. 95 m&l for applying three coats of white wash on ceiling including preparation of new or previously untreated surfaces, complete all as specified and directed. 96 m&l for applying two coats of white wash after preparation of old previously treated plastered surfaces of walls, complete all as specified and directed. 97 m&l for applying one coat of white wash after preparation of old previously treated plastered surfaces of ceiling, complete all as specified and directed. 98 s&f in renewal of hdpe pvc connection 450 mm long suitable for 15 mm gi pipe with two ptmt nuts and rubber washers complete all as specified and directed. 99 s&f in renewal of vitreous china wash hand basin white with flat back of size 550x400 mm, excluding chain and plug, taps and porcelain stopper but incl pvc waste pipe of 32 mm bore, suitable size of waste fittings, one pair of 600 mm long cast iron brackets, complete all as specified and directed. 100 s&f in renewal of shower rose, chromium plated brass, 100 mm size with swivel joint, screwed to iron pipe or for union of 15 mm dia, complete all as specified and directed. 101 cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed. 102 taking up or down existing gi tubing and connections, including making good the disturbed surface for 15 mm bore pipes complete all as specified and directed. 103 taking up or down existing gi tubing and connections, including making good the disturbed surface for 20 mm bore pipes complete all as specified and directed. 104 supply, fixing, laying & testing 15 mm bore galvanised iron water tubing medium grade with and including all gi fittings such as flanges, unions, reducer sockets, socket, reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed to walls, ceilings or floors, complete all as specified and directed. 105 supply, fixing, laying & testing 20 mm bore galvanised iron water tubing medium grade with and including all gi fittings such as flanges, unions, reducer sockets, socket, reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed to walls, ceilings or floors, complete all as specified and directed. 106 dismantling existing water storage tank of any description of capacity exc. 250 ltr but n.exc. 500 ltr, complete all as specified and directed. 107 dismantling existing water storage tank of any description of capacity exc. 500 ltr but n.exc. 1000 ltr, complete all as specified and directed. 108 s&f in position rotational moulded polyethylene water storage tanks 500 lts capacity, white colour ( cylinderical verticalwith closed top ) hoisted and fixed in position, complete all as specified in ssr part i and as directed.note: pvc tank shall be isi marked and having three layers. 109 s&f in position rotational moulded polyethylene water storage tanks 1000 lts capacity, white colour ( cylinderical verticalwith closed top ) hoisted and fixed in position, complete all as specified in ssr part i and as directed.note: pvc tank shall be isi marked and having three layers. 110 s&f of 20 mm dia ball brass valve, high pressure with polythene float and fly nut, screwed down for iron pipe, complete all as specified and directed. 111 s&f in renewal of 20 mm bore stop valve, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for union complete all as specified and directed. 112 s&f in renewal of 15 mm bore stop valve, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for union complete all as specified and directed. 113 s&f in renewal of stop valve 15 mm nominal bore, cast copper alloy, fancy type, chromium plated with long shank and cup ( concealed type ) , screwed down, high pressure with crutch or butterfllly handles, screwed both ends for iron pipe or for brass ferrule or to gi socket complete all as specified and directed. 114 s&f in renewal of bib taps, cast copper alloy, fancy type, chromium plated, with crutch or butterfly handles, screwed down, screwed for 15 mm bore gi pipe or for brass ferrule orto gi socket complete all as specified and directed. 115 s&f in renewal of angle valve 15 mm bore cast copper alloy, cp, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed, complete all as specified and directed. 116 s&f in renewal of two way angle valve 15 mm bore, cast copper alloy, chromium plated with long shank and cup ( concealed type ) , screwed down, high pressure with crutch or butterfllly handles, screwed both ends for iron pipe or for brass ferrule or to gi socket complete all as specified and directed. 117 s&f in renewal of kitchen sink mixer cp hot & cold, 15mm bore, bright finish with three joints screwed the ends for iron pipe and plugging etc completeall as specified and directed. 118 s&f in renewal of wall mixer fitting with built in non return valve with 3 in 1 wall mixer, chromium plated brass, fancy type for 15mm bore completeall as specified and directed. 119 s&f in renewal of basin mixture cp hot & cold, 15mm bore, bright finish with three joints screwed the ends for iron pipe and plugging etc completeall as specified and directed. 120 s&f in renewal of vitreous china floor mounted water closet pan ( pedestal pattern ) with & including superior quality dual type low level pvc flushing cistern, water jet spray and health faucet & including connection to drain or out going pipe and to flushing pipe, antisyphonage pipe etc., & including plastic seat cover white with flat bottom and mild steel chromium plated or aluminised hinging device, complete all as specified and directed. 121 s&f in renewal of vitreous china squatting pan orissa pattern size 580 x 440 mm white with front or back inlet, integral foot rest incl providing lime concrete bedding and connecting to flusing cistern, complete all as specified and directed. 122 s&f in renewal of 10 ltr capacity pvc low level flushing cistern, top push type with inlet ball valve, pvc float, brackets & including superior quality pvc flush pipe of 32 mm dia, completeall as specified and directed. 123 s&f in renewal of sink with draining board made of stainless steel 1mm thick with plugs, washers and waste coupling, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets of suitable angle iron, 32 mm dia superior quality pvc waste pipe and connecting union to pipe overall size 495 mm x 420 mm bowl size 410 mm x 330 mm x 160 mm fixed on granite stone slab and top of granite stone match with top of kitchen sink complete all as specified and directed. note : granite stone slab shall be measured and paid in separately with appropriate item of boq. 124 s&f in renewal of sink with draining board made of stainless steel 1mm thick with plugs, washers and waste coupling, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets of suitable angle iron, 32 mm dia superior quality pvc waste pipe and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed. 125 s&f in renewal of stainless steel utensil plate rack of size 900 x 600 x 200 mm, made of 0.60 mm thick stainless steel sheet and fixed in position, design and pattern as approved by the ge, complete all as specified and directed. 126 s&f in renewal of 600x450 mm bevelled edge mirror 5.5 6mm thick selected quality glass flaw less, mounted in 6 mm thick ac buildings board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. 127 s&f in renewal of ptmt alloy toilet cabinet with mirror of overall size 350x450 mm and fixed to wall complete all as specified and directed. 128 s&f in renewal of soap dish fancy type, chromium plated, approx size 160x160x90mm, fixed to plugs with chromium plated brass screws etc, complete all as specified and directed. 129 s&f in renewal of toilet paper holder, chromium plated, fixed to plugs with chromium plated brass screws etc, complete all as specified and directed. 130 s&f in renewal of 300 mm corner glass shelf with abs brackets etc, complete all as specified and directed. 131 s&f in renewal of grating doom of 100 mm dia, made of mild steel chromium plated, complete all as specified and directed. 132 s&f in renewal of pvc ( swr ) 75 mm dia floor trap, with cp grating including jointing to waste pipe and fixed in cement concrete 1:2:4 type b1 ( using 20 mm graded stone aggregate ) complete all as specified and directed. 133 s&f in renewal of salt glazed stoneware gully traps of size 150x150, square or round mouthed, type p complete all as specified and directed. 134 s&f in renewal of 100mm cast iron sanitary connection socket to fit wc out let complete all as specified and directed. 135 s&f pvc ( swr ) pipe 75 mm bore, single socketed, in any length with rubber ring joints laid in trenches or in floor and including dismantling of old u / s existing pipes alongwith fittings and accessories complete all as specified and directed. 136 s&f pvc ( swr ) pipe 110 mm bore, single socketed, in any length with rubber ring joints and fixed to walls and including dismantling of old u / s existing pipes alongwith fittings and accessories complete all as specified and directed. 137 s&f pvc ( swr ) pipe 75 mm bore, single socketed, in any length with rubber ring joints and fixed to walls and including dismantling of old u / s existing pipes alongwith fittings and accessories complete all as specified and directed. 138 s&f pvc ( swr ) bend 75 mm bore, any radius, incl jointing to waste pipe with solvent cement, complete all as required and as directed. 139 s&f pvc ( swr ) bend 110 mm bore, any radius, incl jointing to waste pipe with solvent cement, complete all as required and as directed. 140 s&f pvc ( swr ) 110 mm bore junction single, ( single t ) equal or unequal with oval access door, incl jointing to waste pipe with solvent cement, complete all as specified and directed. 141 s&f pvc ( swr ) 75 mm bore junction single, ( single t ) equal or unequal with oval access door, incl jointing to waste pipe with solvent cement, complete all as specified and directed. 142 s&f pvc ( swr ) vent cowl 110 mm dia, incl jointing to waste pipe with solvent cement, complete all as specified and directed. 143 s&f stack clamps made out of 50x5 mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof, dia of pipe 100 / 110 mm, complete all as specified and directed. 144 s&f stack clamps made out of 50x5 mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof, dia of pipe 75 / 80 mm, complete all as specified and directed. 145 demolition and breaking up drain pipes 150mm dia ( salt glazed ware, ac or reinforced concrete ) set in cement mortar complete all as specified and directed. 146 m&l for cement concrete 1:4:8 type d 2 using 40mm graded stone aggregate as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested, for 150mm bore of pipe complete all as specified and directed. 147 m&l 150 mm bore reinforced concrete pipes, class np2, laid to slope in trenches and jointed in cm 1:1 and tested, complete all as specified and directed. 148 excavation in trenches not exc 1.5 m wide and not exc 1.5 m deep for foundation etc or for shafts, column footings or for laying cables etc not exc 10 sqm on plan and getting out in soft / loose soil, complete all as specified and directed. 149 returning filling in excavated soil including spreading, levelling, watering and well ramming in layers not exc 25 cm, complete all as specified and directed. 150 removing excavated materials ( soil ) not exc 50 m distance and depositing where directed at a level not exc 1.5 m above the starting point, complete all as specified and directed. 151 taking down carefully copper / aluminium point wiring ( light, fan, socket or power ) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc removing materials to store for reuse or for taking credit and making good disturbed surfaces of walls, floors, etc complete all as specified and directed. 152 dismantling unserviceable main switch / dbs incl wooden board and deposit to mes store yard including making good disturbed surface of wall complete all as specified and directed. 153 taking down sub main wiring of any size / capacity complete all as specified and making good disturbed sufaces to match with the existing surface, complete all as specified and directed. 154 m&l for point wiring with pvc insulated ( frls ) unsheathed multi stranded copper conductor cable of size 1.5 sqmm with pvc insulated ( frls ) unsheathed multi stranded copper conductor cable of size 1.5 sqmm as earth continuity wire to be drawn in and including pvc concealed conduit not less than 20 mm dia including with all accessories and fittings, fixed in concealed & including providing ms sheet metal sunken switch / terminal box 1.2mm thick for mounting switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet cover and making good disturbed surfaces, complete allas specified and directed for the following: one light / ceiling fan / exhaust fan / bell buzzer point controlled by one, one way switch of 5 / 6 amps.note : cutting chases and making good to match with the adjoining surface deemed to be included in the unit quoted rate. 155 all as per item no 153.00 ( here in before ) but one 5 pin, 5 / 6 amps socket outlet point on independent board, controlled by one, one way 5 / 6 amp switch. 156 all as per item no 153.00 ( here in before ) but one 5 pin, 5 / 6 amps socket outlet point on same board, controlled by one, one way 5 / 6 amp switch. 157 all as per item no 153.00 ( here in before ) but one light point controlled by two, two way switch of 5 / 6 amps. 158 m&l point wiring with pvc insulated ( frls ) unsheathed multi stranded copper conductor cable of size 2.5 sqmm, with pvc insulated ( frls ) unsheathed multi stranded copper conductor cablefrls of size 2.5 sqmm as earth continuity wire to be drawn in and including pvc concealed conduit not less than 20 mm dia including with all accessories and fittings, fixed in concealed for one socket outlet 15 amp on independent board & including providing ms sheet metal sunken switch / terminal box 1.2mm thick and fittings for mounting switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet cover and making good disturbed surface, complete all as specified and directed.note : cutting chases and making good to match with the adjoining surface deemed to be included in the unit quoted rate. 159 s&f modular switch 1 way 5 / 6 amps, 1 module, 240 volts, isi marked, complete all as specified & directed. 160 s&f modular switch 1 way 15 / 16 amps, 1 module, 240 volts, isi marked, complete all as specified & directed. 161 s&f modular socket, 5 / 6 amps, 2 / 3 pin combined 2 module, 240 volts, isi marked, complete all as specified & directed. 162 s&f modular socket, 6a / 16a amps, 2 / 3 pin combined 2 module, 240 volts, isi marked, complete all as specified & directed. 163 s&f modular bell push, 5 / 6 amps, 1 module, 240 volts, isi marked, complete all as specified & directed. 164 s&f in renewal of modular fan step regulator, 120w 2 module, complete all as specified & directed. 165 s&f in renewal of buzzer, ding dong ac. 230 volts, single pole complete all as specified and directed. 166 s&f in renewal of modular metal flush box 8 module, isi marked, complete all as specified & directed. 167 s&f in renewal of modular metal flush box 6 module, isi marked, complete all as specified & directed. 168 s&f in renewal of modular metal flush box 3 module, isi marked, complete all as specified & directed. 169 s&f in renewal of modular metal flush box 1 / 2 module, isi marked, complete all as specified & directed. 170 s&f modular white cover plate with frame, 8 module, isi marked, complete all as specified & directed. 171 s&f modular white cover plate with frame, 6 module, isi marked, complete all as specified & directed. 172 s&f modular white cover plate with frame, 3 module, isi marked, complete all as specified & directed. 173 s&f modular white cover plate with frame, 2 module, isi marked, complete all as specified & directed. 174 s&f modular white cover plate with frame, 1 module, isi marked, complete all as specified & directed. 175 s&f switch piano flush type 5 / 6amps, 230 volts, single pole, one way, isi marked, complete all as specified & directed. 176 s&f switch piano flush type 5 / 6amps, 230 volts, single pole, two way, isi marked, complete all as specified & directed. 177 supply and fixingswitch socket combination, 5 / 6 and 15 / 16amps, 230 volt, multi pin, flush type universal, complete all as specified and directed. 178 supply and fixing socket outlet, 5 / 6 amps, 230 volt, five pin, flush type universal, complete all as specified and directed. 179 s&f pvc / polycarbonate lamp holder, angular / batten type with back plate, isi marked complete all as specified & directed. 180 s&f in renewal of stepped type electronic fan regulator, flush type, 230 volts ac, single pole, humming free, fixed on the existing phenolic laminated sheet, complete all as specified and directed. 181 s&f ceiling rose surface type pvc / polycarbonate isolated body, 65x 50mm, 3 terminals, complete all as specified & directed. 182 s&f in renewal of wall mounted 20 watt led tube light fittings, 4 feet in length, batten type with bipin holders, powder coated steel with internally prewired, complete all as specified and directed. 183 s&f in renewal of wall mounted 10 watt led tube light fittings, 2 feet in length, batten type with bipin holders, powder coated steel with internally prewired, complete all as specified and directed. 184 s&f in renewal of led street light fitting 35 watt 230 v ac outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with ip 65 / 66 protection, complete all as specified and directed. 185 m & l in renewal of street / road light gi mounting bracket made out of steel tube, medium grade, 32 mm dia ( or higher size to suit the opening of the fitting ) 0.550 mtr long by hydraulic pressed mechine bend to require arc shape and fixed to pole with 02 nos ms flat iron clamps of suitable size fixed with bolts, nuts and washers including drilling holes and grouting with the same for fixing bolts as required & incl duly painted with two coat of aluminum paint over a coat of aluminum red oxide primer and fixing with lights fittings on the existing old street light poles complete all as specified and directed. note : cost of necessary tools and plants such as ladders, hydra for renewal of mounting brackets, light fittings, nuts, bolts etc shall be deemed to be included in the unit rate quoted. 186 s&f mcb, 6 to 32 amps, single pole, 240 volt, 10 ka c curve including all accessories, complete all as specified and directed. 187 s&f mcb, 40 to 63 amps, single pole & neutral, 240 volt, 10 ka c curve including all accessories, complete all as specified and directed. 188 s & f in renewal of single pole and neutral enclosure with a two pin and earth plug and socket complete with & including one single pole mcb of 20 amps complete, all as specified & directed. 189 s & f mccb 125 amps, 415 volts, four pole, c curve, adjustable type with rupturing capacity 36ka conforming to is 8828 1996, iec 60898 and testing for proper functioning complete, all as specified & directed. 190 s & f factory made verticle tpn db, 4 way, double door, ip 43, as per is 8623 iii, impact resistance ik 09 with the provision of 125 amp mccb 4 pole, 25 ka as incomer, 160 amp rated busbar, blanking plates with all electrical connection complete all as specified and directed.note for items of mcb db ( 1 ) the unit rate includes for cutting the brick / stone walls to accommodate db to make flush to wall. ( 2 ) the unit rate includes for making good the disturbed surfaces including finishes to match with the adjoining surface. 191 s & f factory made mcb db made of sheet steel phosphatised, powder painted with bus bar 200 a, neutral link, earth bar and din rail, 240 volts spn with 8 ways, double door, complete all as specified and directed. 192 s & f factory made mcb db made of sheet steel phosphatised, powder painted with bus bar 200 a, neutral link, earth bar and din rail, 240 volts spn with 12 ways, double door, complete all as specified and directed. 193 s&f of concealed sub main wiring with two runs of single core pvc insulated and unsheathed frls multistranded copper conductor cable of size 10 sqmm lt, 1100 volts grade, drawn through and including 20 mm dia pvc nonmetallic surface conduit with accessories such as socket, elbow, junction box, bell mouth, reducer, bend and flexible conduit etc. and fittings and one run of 10 sqmm single core multistrandedfrls copper conductor cable green colour as earth continuity conductor, including all necessary wall cutting and making good disturbed surface complete all as specified & as directed. note for items of submain wiring: ( i ) cutting chases of stone masonary wall and making good to match with the adjoining surface deemed to be included in the unit quoted rate. ( ii ) two runs of cable one run of earth wire and one run of pvc non metallic conduit of 20mm dia shall be measured as one run length. ( iii ) cable required for connection to dbs shall deemed to be included and shall not be measured separately. ( iv ) earth wire shall run inside the pvc conduit. 194 s&f of concealed sub main wiring with two runs of single core pvc insulated and unsheathed frls multistranded copper conductor cable of size 6 sqmm lt, 1100 volts grade, drawn through and including 20 mm dia pvc nonmetallic surface conduit with accessories such as socket, elbow, junction box, bell mouth, reducer, bend and flexible conduit etc. and fittings and one run of 6 sqmm single core multistrandedfrls copper conductor cable green colour as earth continuity conductor, including all necessary wall cutting and making good disturbed surface complete all as specified & as directed. 195 s&f of concealed sub main wiring with two runs of single core pvc insulated and unsheathed frls multistranded copper conductor cable of size 4 sqmm lt, 1100 volts grade, drawn through and including 20 mm dia pvc nonmetallic surface conduit with accessories such as socket, elbow, junction box, bell mouth, reducer, bend and flexible conduit etc. and fittings and one run of 4 sqmm single core multistrandedfrls copper conductor cable green colour as earth continuity conductor, including all necessary wall cutting and making good disturbed surface complete all as specified & as directed. 196 m&l for earthing with galvanized steel earth plate electrode of size 600 mm x 600mm x 6.0 mm, buried directly in ground ( earth plate not less than 2.25 mtr below normal ground level ) connected to galvanized iron earth wire of 4 dia by means of bolts, nuts, check nuts and washers of galvanized iron including 15 mm bore light grade gi tubing for protection of earth wire, ms sheet metal funnel with wire mesh, watering pipe medium grade 20 mm bore, charcoal or coke and common salt in alternative layer of 15 cm compacted thickness all around the electrode with concrete earth pit of pcc 1:3:6 type 75 mm thick precast rcc ( 1:2:4 ) type b1 pit cover reinfored with 8 mm dia deformed bar and suitable handle made of 10 mm dia round bar and necessary excavation, earth work, in soft / loose soil and disposal of spolis to a distance not exc 50 mtr and necessary connection and testing complete all as shown in electrical plate no. 3 and including dismantling and taking out old earthing complete all as specified and directed.notes: ( a ) irrespective of whatever is shown in plate no 5 of ssr, earth pit shall be casted in pcc ( 1:3:6 ) type c 1 and precast cover of rcc ( 1:2:4 ) type b 1 with suitable handle. ( b ) item includes the cost of gi pipe for protection of earth wire and earth wire upto 7.5 m. any variation below or above shall be measured and paid for separately under relevant item of this sch ‘a’. 197 s&f in renewal of exhaust fan, steel body ac single phase. 230v of size 230mm, sweep with, blades, and frame and louvers & including connecting with and including pvc insulatedthree core 23 / .0076 copper conductor cable, rubber insulated from ceiling rose to exhaust fan motor and writing mes no with black syntheticenamel paint 2.0 cm high and including making appropriate hole in the wall / window complete all as specified and directed. 198 s&f in renewal of exhaust fan, steel body ac single phase. 230v of size 300mm, sweep with, blades, and frame and louvers & including connecting with and including pvc insulatedthree core 23 / .0076 copper conductor cable, rubber insulated from ceiling rose to exhaust fan motor and writing mes no with black syntheticenamel paint 2.0 cm high and including making appropriate hole in the wall / window complete all as specified and directed. 199 m & l for taking down carefully of serviceable geyser from its existing position by disconnecting all connection and keeping it in safe custody and refixing / re installation the same with nuts, bolts, fastnersand electrical connection etc., complete all as specified and directed. 200 s&f in renewal of hdpe pvc connection 600 mm long suitable for 15 mm gi pipe with two ptmt nuts and rubber washers complete all as specified and directed. 201 m & l for taking down carefully ceiling fans, exhaust fans, wall fanscomplete with blade and deposited it into mes stores & re fixing of the same to the specified locations and including connecting of ceiling rose with and including pvc insulatedthree core 23 / .0076 copper conductor cable, complete all as specified and directed....

Indian Army - Rajasthan

40809606 bids are invited for vga cable vga cable 10 mtr , vga cable 20 mtr , vga cable 30 mtr , gun barrel cleaning brush , white raxine total quantity : 40...

Military Engineer Services - Rajasthan

40784310 tender for special repair to bldg no p 152 ( jcos mess ) at mil station sri ganganagar.; 1 dismatiling brick tiles or terracing tiles, single layer on roofs complete all as specified and directed by engineer in charge. 2 demolition of mud in roofs, any thickness, including plastering and leeping ( whether full thickness removed or only a part thereof ) complete all as specified and directed by engineer in charge. 3 s&f heat resistance tiles ofsize 300x300x10mm thick on roof slab of any colour approved over and laid including 15mm thick in cm 1:4.techinical specification of roof tiles shall be as prer is 4457:2007 complete all as specified and directed by engineer in charge. 4 m&l for roof treatment to rcc roofas follows : ( a ) cleaning the roof surfaces thoroughly using wire brushes to remove sharp projections, cleaning joints, washing, drying and removing all dirt / dust to receive concrete padding / plaster etc complete. ( b ) providing 15 mm thick screed bed or bedding layer in cement mortar ( 1:4 ) with wpc , finished even and smooth without using extra cement. ( c ) providing one coat of approved bituminous primer @ 100 gms per sqm, over dried plastered surface. ( d ) laying 3 mm thick app based polymeric membrane, ( mineral finish ) minimum weighing 3 kg / sqm reinforced withnon woven polyster fabric ( weight not less than 150 gms / sqm ) by torch application. the overlapping while torching shall be 75 mm on longitudinal direction and 100 mm on the transverse direction complete all as specified and directed by engineer in charge.makes: stp, dr fixit, sikka, torch tar notes: ( i ) all joints and change in directions should be covered with cement mortar ( 1:3 ) mixed with sbr latex @ 200 ml / bag of cement / as per site requirement and cured well before laying membrane by torching. ( ii ) all angles and abuttments should be sealed well with extra care to ensure full bondage. ( iii ) water proofing treatment shall be got carried out by approved authorised applicator of manufacturer only.the name of firm shall be got approved from ge before carrying out the work. ( iv ) the independent testing of membrane for technical parameters given in particular specificationsshall be carried out from govt approved labs having fascilities for testing of membrane. ( v ) the guarantee of treatment shall be for minimum 10 yearsreckoned from date of completion of whole work complete all as specified and directed by engineer in charge. 5 m&l pcc 1:2:4, type b1 using 20 mm graded stone aggregate as in roof kerbs / benching / coved fillets etc rounded or chamfered on edges, complete all as specified and directed by engineer in charge. 6 dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing ) , and rubbish off the premises complete all as specified and directed by engineer in charge.. 7 m&l 300x600 x7 mm thick glazed ceramic coloured tiles as in vertical sufaces such as skirting or dado set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles and incliding 10mm thick backing coat in cm 1:4. complete all as specified and directed by engineer in charge. 8 m&l non skid ceramic coloured tiles 7 to 8mm thick ( square / rectangular ) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles and incliding 15mm thick screed in cm 1:6 complete all as specified and directed by engineer in charge. 9 m&l light shade vitrified ceramic tiles 10 mm thick ( square / rectangular ) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over screed bed or bedding layer of mortar 15 mm thick in cm 1:6 for laying floor finishes complete all as specified and directed by engineer in charge. 10 m & lmachine cut kota stone slab flooring 18 20mm thick ( minimum size 55 cms x 55 cms ) over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, mirror polishing including 15mm thick of screed bed in cm 1:6.complete all as specified and directed by engineer in charge. 11 m & l machine cut kota stone slabs as in vertical surfces such as risers of steps 18 20mm thickover cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, mirror polishing also moulding edgesincluding 10mm thick of backing coat in cm 1:4, complete all as specified and directed by engineer in charge. 12 m&l granite ( of any type ) work18 to 20 mm thick ( table rubbedand polished ) in steps, jambs, pillars, window cills, cooking platforms, hand wash platform and like laid over and including 12 mm thick cement mortar in cm 1:4including pointing in white cement ( 1:2 ) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed by engineer in charge. 13 demolition of reinforced cement concrete of any description and in any position not other wise specifically provided for ( reinforcement cut as required to facilitate demolition ) complete all as specified and directed by engineer in charge. 14 m&l providingreinfoced cement concrete ( nominal mix ) in cement concrete 1:2:4 type b1 ( 20mm graded aggregate ) as chajjas, lintel, plinth beametcand similar workcomplete all as specified and directed by engineer in charge. ( note : the rate quoted shall be deemed to include use and waste of necessary form work ) 15 m&l tmt bar 10 mm dia and over cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire ( annealed ) not less than 0.9 mm dia complete all as specified and directed by engineer in charge. 16 m&l for providing precast rcc jallies ( cement concrete type b0 1:2:4 12.5mm gragded aggregate ) louvres and jallies, 40 mm thick ( measured solid ) , including allmouldings & set in cm 1:4 complete all as specified and directed by engineer in charge. 17 demolition concrete in ground floors and pavings n exc 15cm thickness ( below or above ground level ) complete all as specified and directed by engineer in charge. 18 m&l75 mm thick cement concrete type d2, 1:4:8 ( using 40mm graded stone aggregate ) filling sub base as in floors, paving, sub floor etc finished even and smoothcomplete all as specified and directed by engineer in charge. 19 m&l 25mm thick cement concrete flooring type b0, 1:2:4 using 12.5 mm graded aggregate finished even and fair complete all as specified and directed by engineer in charge. 20 m&l for sand filling ( 25mm thick ) under floors or in foundations including watering and consolidation complete all as specified and directed by engineer in charge. 21 m&l machine pressed precastrubber moulded concretecoloured interlocking paver block any shape and size confirming to is 15468 2006 of 60 mm thickness with grey cement and pigmentm 35 grade 20mm graded stone aggregate ) complete all as specified and directed by engineer in charge. 22 m&l providing precast cement concrete in pcc ( 1:2:4 ) type b 1 with 20 mm graded aggregate for kerb stone and similar works with plain fair finishes including chamfers, weatherings, throat ing etc. and setting in mortar ( 1:4 ) complete with joints to match complete all as specified and directed by engineer in charge. 23 m & l for 75mm thick cement concrete type c 1, 1:3:6 using 20mm graged aggregate as in plinth protection complete all as specified and directed by engineer in charge. 24 m & l for 40mm thick cement concrete type b 1, 1:2:4 using 20mm graged aggregate as in flooring , finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed by engineer in charge. 25 dismantling of brick work built in cement mortar of any description complete all as specified and directed by engineer in charge. 26 m&l for brick work with sub class b bricks ( old size ) straight or curved on plan exc 6 m mean radius built in cm 1:6complete all as specified and directed by engineer in charge. 27 m&l for brick work with sub class b bricks straight or curved on plan exc 6 m mean radius built in cm 1:6 but except bricks complete all as specified and directed by engineer in charge. 28 taking down cement plaster any description including raking out joints, hacking for key and scrubbing down with water etc complete all as specified and directed by engineer in charge. 29 m&l rendering 15 mm thick in cm ( 1:6 ) finished even and smooth without using extra cement as on brick work surfaces complete all as specified and directed by engineer in charge. 30 m&l 15mm thick rendering in cm 1:4 to brick / concrete wall surfaces finishedeven & smooth w / o using extra cement. complete all as specified and directed by engineer in charge. note: work is to be carried out upto 10 mtr height. 31 m&l 5 mm thick cement plaster in cement mortar 1:3 on ceiling surfaces finished even and smooth without using extra cement complete all as specified and directed by engineer in charge. 32 m&l for preparation ofnewly plastered surface of wall any description and applying twocoats of oil emulsion distemper over & including 3 mm thick wall putty over a coat of chalk whiting layer on plastered surfaces preparatory to distempering complete all as specified and directed by engineer in charge. 33 m & l preparation of new plastered surfaces of wall and applying two coats of cement base paint over & including 3 mm thick wall putty over one coat of alkali resistantprimer complete all as specified and directed by engineer in charge. 34 m & l for three coats of white washing on new plastered surfaces of on ceiling surface including preparation of surface complete all as specified and directed by engineer in charge. 35 m&l for preparation of old surface including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and removing all dirt and dust by watering making surface even and smooth and then applying two coats of cement base paint over over & including 3 mm thick wall putty well prepared old decorated plastered surface etc complete all as specified and directed by engineer in charge. 36 m & l for preparation of old decorated wall surfacesby brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spotsand then applying two coats of oil bounddistemper over & including 3 mm thick wall puttycomplete all as specified and directed by engineer in charge. 37 m & l forold decorated ceiling surfacesby brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spotsandthen applyingtwo coats of white washcomplete all as specified and directed by engineer in charge. 38 taking downsteel window / ventilators complete all as specified and directed by engineer in charge. 39 taking down chowkats or frames ( without taking off shutters from the frame ) not exceeding 1.5 sqm each complete all as specified and directed by engineer in charge. 40 taking down shutters of any description exc 1 sqm but n exc 2 sqm each complete all as specified and directed by engineer in charge. 41 taking down chowkats or frames with shutters ( without taking off shutters from the frame ) exceeding 1.5 sqm but not exceeding 4 sqm each complete all as specified and directed by engineer in charge. 42 taking down shutters of any material and description exc 1 sqm but n exc 2 sqm each and refixing in same opening after resecuring easing duly completed repair work in all respects etc.complete all as specified and directed by engineer in charge. 43 taking down shutters of any material and description n exc 1 sqmeach and refixing in same opening after resecuring easing duly completed repair work in all respects etc.complete all as specified and directed by engineer in charge. 44 s&f steel windows with side hung shutters includinghinges with steel handle and steel peg stay, complete with glazing bars, devetailed or welded complete all as specified and directed by engineer in charge. 45 s&f 10mm dia m. s round guard bars for steel windows & including welding complete all as specified and directed by engineer in charge. 46 s&f ms falt iron 25 x 6mm as in hold fast confirming to fe 290 gde e 165 complete all as specified and directed by engineer in charge. 47 m&l for cutting holes in brick ( n.exc half brick ) walls in cement mortar forinserting holdfasts andmaking gooddismantled portion incement mortar 1:3 or cement concrete 1:2:4type b 1 complete all as specified and directed by engineer in charge. 48 s&f framed brackets of angles or tee with web and flange cut to shape, drilled and counter shunk for screw, including bending and welding angles asnecessary gusset plates riveting rails, braces, running rails and guides and hanging; also fastening and fixing complete conforming to fe 290 ( grade 165 ) complete all as specified and directed by engineer in charge. 49 s & f factory made pressed steel frames of frame size 125 x 60mmfor doors with one or more rebatesincluding necessary fixing lugs, hold fasts, hinges, lock strike plate, etc., complete all as specified and directed by engineer in charge. ( note : mild steel sheet shall be 1.25mm thick ) 50 s & f factory made pressed steel frames of frame size 105 x 60mmfor doors with one or more rebatesincluding necessary fixing lugs, hold fasts, hinges, lock strike plate, etc., complete all as specified and directed by engineer in charge. ( note : mild steel sheet shall be 1.25mm thick ) 51 m&l for providing cement concrete ( 1:3:6 ) type c1 using 20 mm gradded stone aggregate for filling in pressed steel frames and other similar items complete all as specified and directed by engineer in charge. 52 s & f 2nd class hard wood plain solid straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed by engineer in charge. 53 s & f 35mm thick factory made shutter, plain, framed, panelled shutters factory made ( any number of panels ) , with panels of timber flat on both sides ( feather edged ) , or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed by engineer in charge. 54 s & f factory made second class hard wood glazed and skeleton door, window shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc divided into squares with plain, chamfered or rounded mitred and rebated sash bars any number& fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in ssr part i, section 8 clause 8.24 ( a ) complete all as specified and directed by engineer in charge. 55 s&f 18 / 19mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination fixed with screws to timber frame work, including piano hinges, sliding channels and wheels with magneting cather / locking arrangements and beading etccomplete all as specified and directed by engineer in charge. 56 s & f continuous ( piano ) hinges, ( width of flap 40mm when open ) mild steel, bright finish or electrogalvanised complete all as specified and directed by engineer in charge. 57 s&f in repair aluminium 150 mm long hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and directed by engineer in charge. 58 s&ffiber glass reinforced plastic ( frp ) door frames of three legged of cross section 90mmx45mm having single rebate of 32mmx15mm to receive shutter of 30mm thickness. the laminate door frame molded with fire retardant grade unsaturated polyster resin and chopped mat. door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. the frame shall be covered with fiberglass from all sides. m s stay shall be provided at the bottom to steady the frame complete all as specified and directed by engineer in charge. 59 s&f factory made 30mm thick fiber glass reinforced plastic ( frp paneled doorshitter ofrequired colour and approved brand and manufacture made with fire retardant grade unsaturated polyster resin. moulded to 3mm thick frp laminate for forming places for fixing of fittings cast monolithically with 5mm thick frp laminate for panels and conforming to is 14856 2000 complete all as specified and directed by engineer in charge. 60 s&f 100 mmbutt hinges extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed type c 21 complete all as specified and directed by engineer in charge. 61 s&f 125 mmbutt hinges extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed type c 21 complete all as specified and directed by engineer in charge. 62 s&f 75 mmbutt hinges extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed type c 21 complete all as specified and directed by engineer in charge. 63 s&f 125 aluminium anodised barrel tower bolts of extruded sction and fixedcomplete all as specified and directed by engineer in charge. 64 s&f aluminium handle cast type anodised, 150mm long complete all as specified and directed by engineer in charge. 65 s&f 300mm long aluminium alloy anodised sliding door bolt with hasp, staple ( bolt type ) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed by engineer in charge. 66 s&f aluminium anodised barrel tower bolts of extruded section 150mm long complete all as specified and directed by engineer in charge. 67 s&f 300 mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed by engineer in charge. 68 s&f in repairs 300 mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed by engineer in charge. 69 s&f stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed by engineer in charge. 70 s&f in repair stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed by engineer in charge. 71 s & f for floor door stopper of aluminium alloy body and tongue, overall length of cover plate 140mm anodised, with hard drawn steel spring, complete all as specified and directed by engineer in charge. 72 hacking out old broken glass ( any thickness, size, quality or description ) from wooden frames or stone, concrete or brick sorrounds, glazed with oil putty or fixed with beads complete all as specified and directed by engineer in charge. 73 s&f 4mm thick sheet glass ordinary quality and glazing with oil putty in squaren. exc 0.5 sqm in each plane complete all as specified and directed by engineer in charge. 74 s&f 4mm thick figured glass, pin head type and glazing with oil putty or fixed with beads in suqares n.exc 0.5 sqm in each pane complete all as specified and directed by engineer in charge. 75 s&faluminium frame for doors, window, ventilatorswith one or more rebates including joining cleat for fixing including sliding chennals etc complete with powder coating on aluminium minium thickness of powder coating 50 micron as per the specification the top and bottom horizontal members and vertical members adjacent walls shall be fixed with floor, ceiling walls and cills where required and fixing with the help of rawal plug and screw or with fixing clip or with expansion hold plate fasteners . aluminium section shall be smooth, rust free, straight mitred and jointed mechanically where ever required all complete as per the direction of engineer in charge 76 s&f powder coated aluminium door shutters, aluminium section weighing 0.55 kg / m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 nos in each door, hinges, powder coated aluminum snap beading screws etc. including sliding channel, wheel, cleats with whole arrangement complete all as specified and directed by engineer in charge 77 s&faluminiumwindowsand ventilator shutters, side hung typewithout sash bars, aluminium saction weighing 0.55 kg / m including necessary jointing cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, powder coated aluminium fitting such as aluminiumpeg stay 150mm long ( 1no ) , powder coated aluminiumhinges type b 21 100 mm long ( 2no ) , suitable powder coatedaluminium handle ( 1no ) , and powder coated aluminium self closing tower bolt 75mm long ( 1no ) complete all as specified and directed by engineer in charge. 78 s&f powder coated aluminium grills to aluminium windows including all necessary fixing arrangments of size 50 mm x 5 mm thick complete all as specified and as directed by engineer in charge.note: design shall be approvedby engineer in charge. note : minimum thickness of powder coating shall not be less than 50 micron. 79 s & f for 5.5mm thick sheet glass ( tinted ) , selected quality and glazing with necessory arrangement in square exc 0.5 sq. m in each pane complete all as specified and directed by engineer in charge. 80 m&l for preparation of old painted wooden surfaces of any description over 10cm width or girth not otherwise described and applying onecoat of synthetic enamel paint complete all as specified and directed by engineer in charge.. 81 m&l for preparation of new wooden and wood base surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primercomplete all as specified and directed by engineer in charge. 82 m&l for preparation of old painted steel surfaces of any description over 10cm width or girth not otherwise described and applying one coats of synthetic enamel paint complete all as specified and directed by engineer in charge. 83 m&l for preparation of new steel surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed by engineer in charge. 84 s&f in repairs white vitreous china squatting pan orissa pattern of size 580mm x 440 mm, with integral foot rest and p or s trap connection to trap and to flushing pipe front or back inlet including, trap complete all as specified and directed by engineer in charge. 85 s&f in repair vitreous china wash down water closet pan ( pedestal pattern ) , white complete, including white seat cover with hinging arrangement, ( excluding fixing bolts, flushing cistern and flush pipe complete all as specified and directed by engineer in charge. 86 s&f in repairs 10 ltr capacity low level pvc valveless, syphonic action type flushing cistern ( dual system ) , white, with inlet, ball valve, flush pipe, pvc connection 15 mm dia and 450 mm long float and handle including bracket. complete all as specified and directed by engineer in charge. 87 s&f in repair cp toilet paper holdercomplete all as specified and directed by engineer in charge. 88 s&f in repair cp soap dish complete all as specified and directed by engineer in charge. 89 s & f in repairs 20 mm dia gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed by engineer in charge. 90 s & f in repair 15 mm dia gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed by engineer in charge. 91 s&f in repairs chromium plated stop valves, cast copper alloy 15 mm bore screwed down high pressure with crutch or butter fly handle for iron pipe or for union and complete all as specified and directed by engineer in charge. 92 s&f in repairs chromium plated angle stop valves, cast copper alloy 15 mm bore screwed down high pressure with crutch or butter fly handle for iron pipe or for union and complete all as specified and directed by engineer in charge. 93 s&f in repair concealed chromium plated angle stop valves, cast copper alloy 15 mm bore screwed down high pressure with crutch or butter fly handle for iron pipe or for union and complete all as specified and directed by engineer in charge. 94 s&f in repairs chromium plated 15mm bib taps cast copper alloy, chromium platedfency type with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed by engineer in charge. 95 s&f in repairs pvc connection 15mm size with ptmt nuts of length 450mm long complete all as specified and directed by engineer in charge. 96 s&f in repairs pvc connection 15mm size with ptmt nuts of length 600 m long complete all as specified and directed by engineer in charge. 97 s&f cp gratings 100 mm diafixed in repairs. ( minimumweight25 gms ) complete all as specified and directed by engineer in charge. 98 taking up or down gi steel water tubing 15mm bore and connections including fittings from floor / walls / ceiling complete all as specified and directed by engineer in charge. 99 taking up or down gi steel water tubing 20mm bore and connections including fittings from floor / walls / centrings complete all as specified and directed by engineer in charge. 100 s & f galvanised steel water tubing 15 mm bore medium grade with all fittings concealed including cutting chases to brick wall / ceiling or laying in floors and making good complete all as specified and directed by engineer in charge. 101 fixing only tubes, of 15mm bore any grade, ( medium ) to walls and ceilings or laying in floors complete all as specified and directed by engineer in charge. 102 s & f gi steel water tubing 20mm bore medium grade with all fittings and fixed complete to walls ceiling or laid in floors complete all as specified and directed by engineer in charge. 103 fixing only tubes, of 20 mm bore any grade, ( medium ) to walls and ceilings or laying in floors complete all as specified and directed by engineer in charge. 104 dismantling water tanks any type exc. 250 ltr but nexc 500 ltr complete all as specified and directed by engineer in charge. 105 s & f rotational moulded polythylene water storage tank ( cylindrical vertical with closed top ) hoisted and fixed in position all as specified in ssr part i ( 1000 ltrs ) capacity. complete all as specified and directed by engineer in charge. ( note : pvc tanks shall be isi marked & having two layers ) 106 supply and fixing ball valves high pressure of ptmt with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed for bore dia of pipe 20mm.complete all as specified and directed by engineer in charge. 107 dismantling of cast iron or reinforced concrete drain pipes jointed in cement mortar and taking out of trenches, if required.complete all as specified and directed by engineer in charge. 108 s&f 100mm bore sand cast, cast iron soil, waste and vent pipes in any length with or without ears with cement joints laid in trenches or fixed to wall complete all as specified and directed by engineer in charge 109 s&f 75mm bore sand cast, cast iron soil, waste and vent pipes in any length with or without ears with cement joints laid in trenches or fixed to wall complete all as specified and directed by engineer in charge 110 s&fcast iron 100mm bore cast iron bends ( any radius ) , diminishing pieces or tapers ( larger bore measured ) complete all as specified and directed by engineer in charge. 111 s&fcast iron 75mm bore cast iron bends ( any radius ) , diminishing pieces or tapers ( larger bore measured ) complete all as specified and directed by engineer in charge. 112 s&f cast iron 100 mm bore branch pieces, single ( equal or unequal ) , ordinary or inverted ( spigot or socket type ) or with parallel branches complete all as specified and directed by engineer in charge. 113 s&f cast iron 75 mm bore branch pieces, single ( equal or unequal ) , ordinary or inverted ( spigot or socket type ) or with parallel branches complete all as specified and directed by engineer in charge. 114 s&fcast iron100 mmbore branch pieces, double ( equal or unequal ) , ordinary or inverted ( spigot or socket type ) or with parallel branches complete all as specified and directed by engineer in charge. 115 s&f cast iron 75 mm bore branch pieces, double ( equal or unequal ) , ordinary or inverted ( spigot or socket type ) or with parallel branchescomplete all as specified and directed by engineer in charge. 116 s& f 100 mm bore cast iron sockets ( double ) collars complete all as specified and directed by engineer in charge. 117 s& f 75 mm bore cast iron sockets ( double ) collars complete all as specified and directed by engineer in charge. 118 s&f 100 mm cast iron traps ‘p’ or ‘s’complete all as specified and directed by engineer in charge. 119 s&f100 mm cast iron cowls complete all as specified and directed by engineer in charge. 120 taking down eaves gutters and rainwater pipes, pvc ( swr ) pipes ( any size or pattern ) including all fittings heads , shoes, bends, and removal to store complete all as specified and directed by engineer in charge. 121 s&f 110 mm borediapvc ( swr ) pipes single socketed in any length with rubber ring joints, fixed to walls includingnecessary scaffolding upto the height of buildingfrom ground level complete all as specified and directed by engineer in charge. 122 s&f 110 mm dia pvc ( swr ) bend with oval access door complete all as specified and directed by engineer in charge. 123 supply and fixing drapery curtain rod 25mm dia, fancy type, fabricated out of stainless steel steel sheet not less than 20 guage, including brackets and pair of decorated end knobs ( finials ) , stop roller etc, pretreated powder coated natural color completeall as specified & directed by engineer in charge. 124 s&f in rep aluminium door closer hydraulically regulated, designation no. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed by engineer in charge. 125 s&f in replacement double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed by engineer in charge. 126 s & f in repair stainless steel sink with drainage board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mm x 460mm with bowl size 410mm x 330mm x 160mmcomplete all as specified and directed by engineer in charge. 127 dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by engineer in charge. 128 m & l for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings ( exclusive of steel sheeting or other covering, running rails and guides ) and hanging; also fastening and fixing complete conforming to fe 290 ( grade 165 ) complete all as specified and directed by engineer in charge. 129 m & l framed work as in doors or gates of angle or other section with gusset plates, for stainless steel framed work as in multipurpose vegitable rack, ration rack, utensils racks, plate rack ofgde 304 ordoors or gates of angle or other section with gusset plates, rails, braces, including ss wire guage arragements in sides etc., complete, drilled for fixing of steel sheeting or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings ( exclusive of steel sheeting or other covering, running rails and guides ) and hanging; also fastening and fixing, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings ( exclusive of steel sheeting or other covering, running rails and guides ) and hanging; also fastening and fixing complete complete conforming complete all as specified and directed by engineer in charge. 130 excavating post holes ( or similar holes ) each n.exc. 0.5 cum getting out returning filling, in and ramming with earth around in layers not exc. 25 cm includingwatering and removing surplus soil to a distance n.exc. 50m and making good surface in soft loose soil complete all as specified and directedbyendineer in charge. 131 m&l pcc 1:3:6 ( 40mm graded stone aggregate ) type c2, in foundation of posts and strutscomplete all as specified and directedbyendineer in charge. 132 s&f pre painted galvalume aluminium zinc coating gi based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directedbyendineer in charge. 133 s&f pre painted galvalume aluminium zinc coating gi based plain steel sheet 0.50mm thick of any colour having tensile strength of 550mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directedbyendineer in charge. 134 s&f 0.56 mm thickplain, aluminium sheeting, alloy 31000 h4 for crumple / expansion joints, ridges, hips, valley gutter, drip, and straight flashing ( length and girth as fixed ) fixed with self tapping screws complete all as specified and directedbyendineer in charge. 135 s & f for steel work in tubular trusses , channels , purlines, crange gantries, rails including special shaped washer, platesnuts and bolts, gusset plates, including necessary drillingetc. complete using erw or induction butt welded tubes conforming to i. s.1161 1979 grade st. 240 complete all as specified and directedbyendineer in charge. 136 s & f for flat ironfor wind ties, plates ( plain or chequered ) channels, posts, square cut or notched ( ordinary and counter sunk ) forming holesetcfe 410 w ( gde e 250 ) quality a complete all as specified and directedbyendineer in charge. 137 s&f mild steel screw bolts ( machine made ) with hexagonal or square head at one end, and screwed the other, or screwed bothend to be fitted with washer and one hexagonal / square nut not exceeding 5cm long and dia of neck 11 to 15mm complete all as specified and directed by engineer in charge. 138 s&f for dwcpe ( s n 8 ) drain pipe 150mm internal dia confirming to is 16098 part ii 2013 laid in trenches on moorum bed to required slope including all accessories / fitting complete all as specified and directed by engineer in charge.note: moorum shall be paid separately. 139 excavation in trenches, n exc 1.5m wide and n exc 1.5 m depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5m in depth and getting out in soft / loose soil complete all as specified and directed by engineer in charge. 140 returning, filling in, including spreading, levelling , watering and well ramming in layers not exc 25 cm.in soft / loose soil complete all as specified and directed by engineer in charge. 141 removing excavated material n exc. 50 mtr and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed by engineer in charge. 142 m & l for pcc ( 1:4:8 ) type d2 ( 40mm graded stone aggregate ) as in foundation lean concrete complete all as specified and directed by engineer in charge. 143 m&l for pcc 1:3:6 type c 2 ( 40mm graded stone agg. ) concrete in surface channels and drains complete all as specified and directed by engineer in charge. 144 m&l for brickwork withsub class `b bricks, straight or curved on plan exc 6m meanradius, built in cm 1:4 in half brick thick wall / on edge wall complete all as specified and directed by engineer in charge. 145 taking down carefully copper / aluminium point wiring ( light, fan, socket or power, bell complete fitting such as sockets, ceiling roses, pendants, batten holders, regulators and making good the disturbed surfaces of wall, floors, ceiling in cm 1:3 etc complete all as specified and directed by engineer in charge. 146 dismantling and taking down fluorescent / ledtube light / wall light / ceiling light single / bulk head / tube light / suspension light / mirror light double of any wattage or size street light fittings for repair / refixing purpose all as specified and directed by engr in charge. 147 fixing only led lights fitting 1x 20 / 25w, 220v, led tube light / security light / bulk head / mirror light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. 148 m & lfor concealed conduit point wiring complete for light / fan on independent / combine boardwith cable 1.5 sqmm ( nominal area ) frlshpvc insulated multistranded unsheathed copper conductor, drawn in and includingpvc concealed conduitpipe medium grade 20 mm dia, pipe hooks , elbows, juction covers and junction boxes , aftercutting in wall chasing for conduits and sinkings for sunkencast iron / pressed steelterminal boxes suitable lengthandthickness for mounting, switches, sockets, fan regulatorwith 3 mm thick plastic laminated sheet cover fixedwith brass screwed and cup washers, dulygrouting and painted with red oxide metal primer and making the gooddisturbed surfaces of wallin cm 1:3 with white wash or existing colour including provision ofcontinuousearth continuity conductoralong with point wiring of 1.5 sqmm copper pvc insulated cable for one light / fan point controlled by one switchand connected to commonearth dolly, complete all as specified anddirecedby the engineer in charge. 149 all as per srl item no 148 here in before but for one switch socket combination5 / 6 amp on independent board complete all as specified and directed by engineer in charge. 150 all as per srl item no 148 here in before but for one three pin socket outlet 5 amp on same board with other switches complete all as specified and directed by engineer in charge. 151 all as per srl item no. 148 here in before but for one switch socket combinationt 6 pin 5 / 15 amps on independent board with copper conductor 2.5 sqmm complete all as specified and directed by engineer in charge. 152 s & f switch piano flush type 5 / 6 amps single pole one way complete all as specified and directed by engineer in charge. 153 s & f switch socket combination 5 pin, type 5 / 6 amps flush type complete all as specified and directed by engineer in charge. 154 s & f switch socket combination 6 pin, 5 / 16 amps flush type complete all as specified and directed by engineer in charge. 155 s & f socket outlet 5 pin 5 amps flush type complete all as specified and directed by engineer in charge. 156 s & f ceiling rose surface bakelitethree terminals complete all as specified and directed by engineer in charge. 157 s & f in repair compact & decorative energy efficient led mirror light fitting with antiglare diffuser and decorative end caps suitable for 1x10 watt fitting 2 ft version including led lamp 10 watt complete all as specified and directed by engineer in charge. 158 s & f in replacement of existing light fitting withled batten with aliminium housing andintegrated electronic driver, 20 watt having input voltage ac90 300v, 50 hz , 6500k, and all other accessories including connection with flexiblecable copper conductortwin coreof size 23 / .2 mm upto ceiling rose / connector complete all as specified and directed by engineer in charge. 159 s & f angle holder insulated body with back plate for conduit fittings complete all as specified and directed by engineer in charge. 160 s&f led lamp 9w for angle holder complete all as specified and directed by engineer in charge. 161 s & fin replacement water tight bulk head fitting, comprision of connector , weather proof enamelled gallery , glass well, and including 10 watt led lamp all as specified and directed by engineer in charge. 162 s&f in replacementmcb protected socket 25amps in renewal with plastic box and plug topvertical din rail mount type suitable to operate at 240v current rating range 25a , 50hz 1ph, complied is specification 13032 & 8623 complete all as specified and directed by engineer in charge. 163 s&fin replacementround recess mounted led edge lit slim downlight 12 watt ( 6500k ) with opal diffuser and separate electronic driver die cat aluminum housing fineshed in premium white powder coating efficacy 100lm / w complete all as specified and directed by engineer in charge. 164 s&f decorative, wall mounting, made of polycorbonate suitable for 9 w led lamp, b22 base complete all as specified and directed by engineer in charge. 165 s & f stepped type, single socket fan regulator for ceiling fan 1200 / 1400mm sweep complete all as specified and directed by engineer in charge. 166 s & f in replacement of sub main wiring with two single core cables pvc insulated and un sheathed 6 sqmm ( nominal area ) frlsh multistranded copper conductor drawn in concealedpvc conduict dia 25mm “medium quality” conduit including 6.00 sq mm ( nominal area ) copper cableas earthcontinuity conductor after chasing in wall and making good the disturbed surfaces and white wash or existing colour , necessary junction box and coversincluding necessary connections, pvcflexible pipes are used in pannel board while connecting the cablecomplete all as specified and directed by engineer in charge. ( note : pvc cable and pvc conduit shall be isi marked ) 167 s & f in replacement of sub main wiring with two single core cables pvc insulated and un sheathed 4 sqmm ( nominal area ) frlsh stranded copper conductor drawn in concealedpvc conduict dia 25mm “medium quality” conduit including 4.00 sq mm ( nominal area ) copper cableas earthcontinuity conductor after chasing in wall and making good the disturbed surfaces and white wash or existing colour , necessary junction box and coversincluding necessary connections, pvcflexible pipes are used in pannel board while connecting the cablecomplete all as specified and directed by engineer in charge. ( note : pvc cable and pvc conduit shall be isi marked ) 168 s & f in repairs sheet metal enclosure for double door db made out of crca mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mounted sp & n 8 ways, 240 volts, isi marked, 200 amps bus bar stove enameled dust and vermin proof suitable for incorporation mcbs and isolators etc complete all as specified and directed by engineer in charge. 169 s & f in repairs sheet metal enclosure for double door db made out of crca mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mounted sp & n 12 ways, 240 volts, isi marked, 200 amps bus bar stove enameled dust and vermin proof suitable for incorporation mcbs and isolators etc complete all as specified and directed by engineer in charge. 170 s&f in repairs mccb tp&n 63 amps with breaking capcity 16ka , fixed tm and 415 volts ac supply isi marked complete all as specified and directed by engineer in charge. 171 s & f in repairs mcb ‘c’ series type suitable for 240 volts, ac supply5 to 40 amps, s p & n with over load and short circuit protection and rupturing capacity not less than 10ka complete all as specified and directed by engineer in charge. 172 s & f in repairsmcb ‘b’ series type suitable for 240 volts, ac supply5 to 40 amps , single pole with over load and short circuit protection and rupturing capacity not less than 10ka complete all as specified and directed by engineer in charge. 173 m & l for earthing complete with gi earth plate electrode 60 cm x 60 cm x 6 mmthick burried directly in ground ( earth pit not less than 2.25 mtr deep below ground level ) with top edge of plate not less than 1.5 mtr below ground level , connecting to gi earth lead 4 mm dia gi earth wire , by means of bolts, nuts and washers of giand protection by provisionof gi medium grade pipe 15 mm bore including provision of concrete pit in pcc ( 1:2:4 ) type b1 using 20 mm grade stone aggregate with 40 mm thick cover of rcc ( 1:2:4 ) reinforced with xpm ( weight not less than 4kgs / sqmm ) and frame of angle iron 25mmx25mmx6mm with lugs 02 nos and with 6 mm dia ms bar handle made to shape , gi light grade 20mm bore pipe for watering perforated at the bottom 1.75 meter long placed ontop edge of earth plate common salt and charcoal filling test point made out of 40 mmx 8 mm fi with fixing arrangement , funnel, wire mesh and earth work inhard dense soil , returning filling in and removal of surplus soil to a distance not exceeding50 mtrs all as per electric plate no.3 of ssr part 1 and connecting to earth test point including taking out unserviceable earthing with all acessories all as specified or indicated including testing on completion all as specified and directed by engr in charge 174 s&fin replacement security light fitting led type 25 watt with all necessary acessories, clear transparent acrylic cover, prewire suitable to operated on 230 volt 50 hz ac & supply and fixing to wall / on pole including fixing arrangement with suitable galvanized iron pipe 35 mm bore “light grade” brackets 2 mtr length bent to shape to obtained required shape including clamps, nuts / bots / washers etc connecting with suitable flexible copper wire of size 23 / 0.0076 complete all as specified and directed by engineer in charge 175 s&f in repairs sheet metal enclouser for doble door vertical dbs made out of crca mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mouting vtpn 4 way 415 voltisi marked 250amps busbar stove enameled dust and vermin proof, ip:43 protection suitable for incorporation fp mccb ( v tech ) n1 frame upto 125a, isolators and including give connection with wire and cable etc complete all as specified and directedby engineer in charge . 176 supply and fix pvc body tent / industrial type desert cooler ( 1135x600x1535mm ) alongiwth four wheels, electric driven ( single phase ) , 3 speed motor with 950 rpm, 30 inch axial type fan , noise level 68 db, having nominal air flow capacity of 18000cmh / 10500 cfm, large size, pad size ( 1100x100x1150mm ) , water tank 90l capacity, black color complete all as specified and directed by engineer in charge 177 hanging only ceiling fan ( m.d. supply ) and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed by engineer in charge 178 fixing only exhaust fan ( m.d. supply ) and connecting upincluding provision of cable from ceiling rose / connector to fan and clean the existing exhuast fan with chemical solution complete all as specified and directed by engineer in charge 179 s&f rj 45 data and tv socket eachfor connection of data network and tv cable ( dish ) complete all as specified and directed by engineer in charge 180 s&f rigid non metaliic pvc conduit 20mm dia inclusive of all tees, bends , elbows , reducers , bell mouth tube ends and complete with all fixing accessories such as couplers , lock nuts, saddles, pipehooks etc complete all as specified and directed by engineer in charge 181 s&fsteelbody exhaust fan of 300mm sweep , 240 volt , 900 rpm, 5 star rating complete with louvers and shutter and mounted in suitable opening arrangement in wall and connecting up including 3 core pvc insulated pvc sheathed copper conductor flexible cable 24 / 0.2mm from ceiling rose to fan complete including breaking of brick wall and making a hole for fixing of exhaust fan including grouting of bolts and making good to disturbed wall in cm ( 1:4 ) white washing matching with existing color etc complete all as specified and directed by engineer in charge 182 supply and filling in sand for cable protection complete all as specified and directed by engineer in charge 183 supply and lay standard size bricks subclass b type complete all as specified and directed by engineer in charge 184 m&l for fixing gi tubing ( light grade ) 80mm bore for cable protection laid under path / trench / wall / on pole all as specified and directed by engr in charge. 185 supply and lay jointing and testing and commissioning in replacement of 35 sqmmx4 core xlpe insulated, screened , pvc bedded galvanised steel strip or wire armoured electric power cable heavy duty multi stranded aluminium conductor & pvc sheathed lt cable 1100 v grade conforming to is 7098 laid in trenches / ducts / fixed on poles wall / laid under roads / paths / drain / culverts or passing through pipes complete all as specified and directed by engineer in charge. 186 m&l for galvanized steel water tubing medium grade of 25 mm bore with & including all fittings complete, laid in trenches / wall or floor , and connections of 25 mm bore, complete all as specified and directed by engineer in charge. 187 supply & fixing mild steel clamps made of flat iron 40x6mm in two halves for tapping through 40 to 100mm bore gi / di water pipe line including drilling and welding of 15 25mm gi socket and necessary rubber insertion, nut, bolts & washers complete all as specified and directed by engineer in charge. 188 s&f 20mm bore gun metal gate valve ( isi marked ) with iron wheel head, screwed both ends for iron pipe, including dismantling & taking out old unserviceable gate valve of 20mm bore, complete all as specified and directed by engineer in charge. 189 m&l for cutting existing steel tubing for alterations or additions for 40mm to 50 mm size screwing existing steel tubing for alterations or additions ( or lengthening screw on pipe to form connector ) complete all as specified and directed by engineer in charge. 190 s&f 25mm bore gun metal gate valve ( isi marked ) with iron wheel head, screwed both ends for iron pipe, including dismantling & taking out old unserviceable gate valve of 20mm bore, complete all as specified and directed by engineer in charge. 191 supply, fixing , testing & commisioning of electric chimney ( 90 cm ) with feature of baffle filter, inbuilit light, touch screen control panel, noise level, 58 db, stainless steel body, air suction capacity 1200 cmh, speed level 3 , motor power 180 watt, input vol 220 240 v / 50hz, remote controlled and fitting in wall as connecaled or duct all as specified and directed by eng in charge. 192 supply and fixing of ms powder coated fly catchers machine with dimensions ( l 24.5 x d 5.5 x h 17 ) , light source philips actinic uv tubes ( two tubes ) , capacity of 18 watt each of tube all as specified and directed by engr in charge. 193 note : ( i ) amount ofcredit for retrieved materials is mentionedin sch a section ii of tender documents in pdf form which will be deducted while acceptance of tender offline....

Indian Army - Rajasthan

40769359 bids are invited for spotting scope jack 20 ton with rods , case collector , barrel cleaning brush , air plug for skill at arms , eye mask for skill at arms , spotting scope with tripod total quantity : 38...

North Western Railway - Rajasthan

40701138 supply of mild steel barrel tower bolts with m.s. barrel and m.s. bolt and socket stove enameled length of bolt. a=100 mm and dia of bolt d=10 mm to is:204 /1 991, part 1, amndt. 3, table 1.mild steel barrel tower bolts with m.s. barrel and m.s. bolt and socket stove enameled length of bolt. a=100 mm and dia of bolt d=10 mm to is:204 /1 991, part 1, amndt. 3, table 1.,mild steel barrel tower bolts with m.s. barrel and m.s. bolt and socket stove enameled length of bolt a=100 mm and dia of bolt d=10 mm to is:204/1991, part 1, amndt. 3, table 1. [ warranty period: 30 months after the date of delivery ]...

North Western Railway - Rajasthan

40566886 supply of oil handling rotary barrel pumpoil handling rotary barrel pump,oil handling rotary barrel pump with 01 meter outlet hose pipe is: 1545/1985, make prima or universal or belto. [ warranty period: 30 months after the date of delivery ]...

Indian Army - Rajasthan

40382585 bids are invited for n1 / arj / v14801290014 compressor gear assy ( mtrl no 10449977 ) , n1 / arj / 5340 181787 assy dust cover barrel ( mtrl no 10443360 ) , n1 / arj / 5315009991 split pin 2 x 8 long is 549:2005 ( mtrl no 10446361 ) , n1 / arj / v14801292001 tool for control rod ( mtrl no 10444316 ) , n1 / arj / v14801290012 pulley assy ( gun pull back ) , n1 / arj / v14801290011 tool for ring nut dash pot ( mtrl no 10450031 ) , n1 / arj / 5315052304 assy pin ( mtrl no 10450144 ) total quantity : 114...

North Western Railway - Rajasthan

40350883 supply of mild steel barrel tower bolts with m.s. barrel and m.s. bolt and socket stove enameled length of bolt a=100 mm and dia of bolt d=10 mm to is:204 / 1991, part 1, amndt. 3, table 1. carriage stores depot rajasthan 2277.00 numbers...

Indian Army - Rajasthan

40212913 bids are invited for mt 24 wheel cyl with citradelip 44 45 mm dia , field coil assy , msl gasket cyl head to cyl barrel , cushion assy rr og , tapper roller bearing front hub , kick start gear , thermostat , gasket cyl head cover , sensor inlet air temperature , suspension bush kit , hose outlet , gakset set total quantity : 15...

North Western Railway - Rajasthan

40108818 supply of copper thimble ring terminal type heavy duty long barrel size 95 sq.mmcopper thimble ring terminal type heavy duty long barrel size 95 sq.mm,copper thimble ring terminal type heavy duty long barrel size 95 sq.mm hole dia 10mm make: dowell, ascon, kamlesh or chatna. [ warranty period: 30 months after the date of delivery ]...

North Western Railway - Rajasthan

40106210 supply of oil handling rotary barrel pumpoil handling rotary barrel pump,oil handling rotary barrel pump with 01 meter outlet hose pipe is: 1545/1985, make prima or universal or belto. [ warranty period: 30 months after the date of delivery ]...

Rajasthan Rajya Vidhyut Prasaran Nigam Limited - Rajasthan

40086762 tender for 1. construction of 132kv gss along with associated lines & bays including supply of all equipments, materials, erection (including civil works), testing & commissioning (8 nos. 132 kv grid sub stations at arnod, chitamba, devri, jarkhoda, peelwa nadi, ralawata, seeswali & tarnau having 132/33 kv 31.5 mva power transformer along with associated lines (100 km s/c, 45km d/c approx.) & 6 no. 132 kv bays 2. purchase of ht hrc fuses and ht expulsion type fuses along with fuse barrels & assembly for r&m of existing 33 kv capacitor banks 3. rate contract for 2 years for purchase of safety items earthing chain, safety4. rate contract for 2 years for purchase of safety items earthing rod for gss, earthing rod for line, fiber ladder...

Indian Army - Rajasthan

40078210 bids are invited for gravity based roller conveyers for ammunition shifting , barrel lifting mechanism , small arms cleaning device , automatic portable hydraulic jack for b vehicle , portable air compressor cum air filling machine total quantity : 7...

Rajasthan Rajya Vidhyut Utpadan Nigam Limited - Rajasthan

40050899 requirement of spare parts of flame scanners and exciter box for u7 &amp 8, ssctpp, suratgarh 1 fsa flame processor module nos. 3 2 fsa 2 / 4 flame module with rs 485 nos. 2 3 fsa linear power supply module ( 230v ac ) nos. 2 4 fsa power supply mother board nos. 2 5 complete collimeter assy nos. 4 6 lens barrel assy ( metric thread ) nos. 4 7 fiber optic cable l=130 inch ( metric ) nos. 5 8 fsha housing electronics card nos. 4 9 pig cable ( blue ) with connector for fsha nos. 4 10 quartz lens suitable for fsa nos. 50 11 fsha 5 pin male connector bn10 nos. 5 12 flame scanner glass fuse, rating 125ma nos. 20 13 108.54 flame scanner head assy complete nos. 3 14 hea exciter box nos. 3 15 hea flexible cable...

Medical College - Rajasthan

40040402 supply of medicines under mmcsby and rghs for neuro surgery dept. , cervical c1 c2 lateral mass screw with plate / rod ( titanium ) , occipital plate ( titanium ) with screw ( titanium ) and connector , sub axial cervical lateral mass screw ( titanium ) with rod ( titanium ) , titanium rod and connector , titanium cervico dorsal taperedrod , titanium standalone cage , cervical cage ( titanium ) with cervical plate ( titanium ) with screw , cervical expandable cage ( titanium ) with cervical plate ( titanium ) with screw , standalone cervicalexpandable cage ( titanium ) , monoaxial screw ( titanium ) , pedicle screw ( titanium ) polyaxial scerw , transforaminal lumbar interbody fusion ( tlif ) cage , ha coated titanium polyaxial pedicle screw , canulatedtitanium pedicle screw with kyphoplasty / vertibroplastybone cement , titanium polyaxial iliac screw , percutaneus rods ( titanium ) , percutaneus screw ( titanium ) , single baloon kyphoplasty with cement , double baloon kyphoplasty with cement , vertebroplasty set with cement , craneoplasty ( titanium ) platewith screw with mini plate and screw , cranioplasty mesh titanium , aneurysm clip permanent straight and bayonet 5, 7, 9, 10, mm , abdominal drain kit size 32 having drainage catheter and collection bag 2000ml , abdominal drain kit size 30 having drainage catheter and collection bag 2000ml , endoscopic esophageal sems nitinol material; looped stent flare ends with retrieval loop on prosimal end; upto 75% reconstrainable; 4 ro positioning markers , endoscopic esophageal sems single stranded nitinol material; high tensile suture release; proosimal and distal release options; post deployment endoscopic and ro markers; scope caliberation on stent catheter , endoscopic removable esophageal stent for benign indications polyester braided encapsulated with sillicon; sizes 9, 12 or 15 cm; 3 ro and 3 endoxcopic markers , endoxcopic pyloricsems 10fr. through the scope or over the wire delivery system; nitinol material; looped ends of stent, 3 ro positioning markers; 70% reconstrainablility , endoxcopic colonic sems 10fr. through the scope or over the wire delivery system; nitinol material; looped ends of stent, 3 ro positioning markers; 70% reconstrainablility , endoxcopic colonic sems 10fr. through the scope or over the wire delivery system; nitinol material; looped ends of stent, 3 ro positioning markers; 70% reconstrainablility , endoxcopic biliary sems platinol material; upto 87% reconstrainable; 3 ro markers; clear distal tip; yellow endoscopic transition zone; close cell geometry with looped ends of stent; fully covered option indicated for benign indications also , endoscopic removable biliary stent for benign indications thin wall design; 7fr & 10fr with 5, 7, 10, 12, 15 cm lengths; radio opaque bio compatible material; barbed ends for anchoring endoscopic removable biliary stent for benign indications thin wall design; 7fr & 10fr with 5, 7, 10, 15 cm lengths; radio opaque bio compatible material; pig tail ends for anchoring , endoscopic removable biliary stent for benign indications thin wall design; 7fr & 10fr with 5, 7, 10, 15 cm lengths; radio opaque bio compatible material; pig tail ends for anchoring , endoscopic sphinctrotome triple lumen; 20mm cut wire; 5.5fr tip size; off centric monofilament cut wire , endoscopic needle knife triple lumen; off centric monofilament cut wire with exposure 1mm to 6mm, tip taper from 7fr 5fr , endoscopic stone retrieval basket pre cursor alloy material; silver tip technology to avoid basket impaction; can be used for performing mechanical lithotripsy using a lithotriptor , endoscopic stone retrieval balloon priple lumen; injection above / below; two distinct diameters 9 12mm, 12 15mm, 15 18mm; square shoulder balloon; proximal ro markers , endoscopic stone retrieval balloon priple lumen; injection above / below; two distinct diameters 9 12mm, 12 15mm, 15 18mm; square shoulder balloon; proximal ro markers , endoscopic biliary dilatation balloon hydrophilic dilatation baloon; 4fr. tip; langths 2 and 4 cm; 4, 6, 8, 10mm diameter sizes; 2 ro positioning markers , endoscopic ultrasound needle cobalt dhromium material for 22 & 25 ga and nitinal material for 19 flesible; customized needle sheath; echogenic pattern till needle tip; sharp tip grind , guide wire 0.035 tip wire with 260 cm, 420 cm and 450cm working length; kink resistant nitinol standard and stiff shaft; endoglide sheath coating; 10 cm hydrophillic tip , endoscopic biopsy forceys , mechanical lithotryptor , multiband ligator non latex material, clear ligating barrel with rear mounted bands; single strand deployment; square band design for high retention , hemoclip applicator , loop grasper , hemo spray , co2 insufflater , water jet irrigalien set , bornia basket...

Private Company - Rajasthan

40036099 auction sale of following items tmt scrap, steel fabricated segmental mould, ht strands scrap, ms structural steel scrap, tmt scrap (small cut pieces) etc. (location bundi. rajasthan) ms p&m spares scrap, wooden plywood scrap, copper cable scrap, manganese scrap, ms empty barrel scrap, used & waste oil, old & used tyre scrap etc. (location bundi. rajasthan) ...

Medical Health And Family Welfare - Rajasthan

40017478 supply of surgical implants and equipments (annual contract) at saadat hospital and mch tonk , femurinterlocking nail withlockingscrews(samemake)all size, s.s. 8 to 12 mm and length 340 to 460mm, 3.9 & 4.9 mm locking bolts 24mm to 70mm , femur interlockingnailwith locking screws(same make) all size, titanium.8 to 13 mm and length 340 to 460mm, 3.9 & 4.9mm locking bolts 24mm to 70mm , expert femur interlockingnailwith lockingscrews(same make)allsize,s.s.,8to13mmandlength340to460mm 4.9mm locking bolts 24mm to 70mm , expert femur interlockingnailwith locking screws(same make) all size, titanium 8 to 13 mm and length 340 to 460mm4.9mm locking bolts 24mm to 70mm , tibia interlocking nail with locking screws (all size), s.s. 8 to 11 and length 280 to 380mm 3.9mm and locking bolts 24mm to 70mm 4.9mm and locking bolts 24mm to 70mm (same make) , tibia interlocking nail with locking screws (all size), titenium . 8 to 11 and length 285 to 405mm 3.9mm and locking bolts 24mm to 70mm 4.9mm and locking bolts 24mm to 70mm (same make) , expert tibia interlocking nail with locking screws (all size), s.s. 8 to 11 and length 285 to 405mm3.9mm and locking bolts 24mm to 70mm 4.9mm and locking bolts 24mm to 70mm (same make) , interlockingnailtibiasolid/8,9,10/28 38cmwithfourlocking bolt. (all size) s.s. (same make) , bipolarprosthesis non fenestratedsterilizedsize37to55mm (all size) , bipolarprosthesisfenestratedsterilizedsize37to55mm(all size) , modular bipolar system modular bipolar stem non fenestrated sterilizedmodular bipolar head with internal head sterilized bone plug (cement restrictor) , elastic nail of all size (tens) & diameter, titenium a) 2,2.5 mm (b) 3,3.5 mm (c)4 mm, 4.5mm , rush nail size 20 30mm, s.s. a) 1.5mm b) 2,2.5 mm (c)3,3.5mm , square nail ulna size 21 to 28mm, s.s. (a) 2,2.5 mmb) 3 m (c) 3.5, 4 mm , pfnnail shortsswithlockingscrew(samemake)all size , s.s.9to12mmandlength180 & 250mm6.4mmpfnlagscrew 50mmto120mm8.0mmpfnlagscrew50mmto120mm 4.9mmlocking bolts 24mm to 70mm , square nail radius size 21 to 28mm, s.s. (a) 2,2.5 mm b) 3 mm (c) 3.5,4 mm , enders nail 3.0mm to 4.5mm(200mm to 460mm), s.s. , steinmann pin sterile size 200 to 225mm, s.s. (a)3,3.5,4,4.5mm (b)5,5.5,6mm , ss wire 18,20,22,24,26 swg , k wirealldiameterssizelength150mm(a)1.0mm1.2mm 1.5mm 1.8mm 2.0mm 2.5mm 3.0mm , criclagewirefortbw,s.s.(a)1mm,1.2mm(b)1.5mmto 2mm , proximal trochentric femur nailss with locking screw (same make) all size , s.s. 9 to 12mm 6.4mm pfn lag screw 50mm to 120mm 8.0mm pfn lag screw 50mm to 120mm 4.9mmlocking bolts 24mm to 70mm , pfn nail long (left/right)ss withlocking screw(same make) allsize,s.s.9to12mmandlength340mmto420mm6.4mm pfn lag screw 50mm to 120mm 8.0mm pfn lag screw 50mm to 120mm 4.9mm locking bolts 24mmto 70mm , pfna2nailshortsswithcompatiblelockingscrew(same make)allsize,withhelicalblade(pfna2blade),s.s. nail diameter9to13mmandlength170mmto240mm , pfna2nail long(bothside)withcompatiblelockingscrew (samemake)allsize,withhelicalblade(pfna2blade),s.s. naildiameter 9 to14mm and length260mm to420mm 4.9mmlocking bolts 24mm to 70mm , pfn a2 nail long (both side) with compatible locking screw (same make) all size,with helical blade (pfna2 blade), titeniumnail diameter 9 to 14mm and length 260mm to 420mm 4.9mmlocking bolts 24mm to 70mm , proximal lateral tibia locking plate (left/right) with compatible 5 holes to 15 holes s.s. (( lhbp type) 5.0mm locking head screw (cortical)16mmto100mm(allsize)cancellouslockinghead screw(partiallyandfullytheaded)16mmto100mm 4.5mmcortical screw 16mm to 60mm 6.5mm cancellous screw (partially and fully theaded)any sizes , proximal lateral tibia locking plate (left/right) with compatible 5 holes to 15 holes. titenium ( lhbp type) 5.0mm locking head screw (cortical)16mm to 100mm (all size) cancellous locking head screw (partially and fully theaded)16mm to 100mm 4.5mmcortical screw 16mm to 60mm 6.5mm cancellous screw (partially and fully theaded)any sizes , proximal medial tibia locking plate (left/right) with compatible 3 holes to 9 holes, s.s.5.0mm locking head screw (cortical)16mm to 100mm (all size) cancellous locking head screw (partially and fully theaded)16mm to 100mm 4.5mmcortical screw 16mm to 60mm 6.5mm cancellous screw (partially and fully theaded)any sizes , proximalposteromedialtibia lockingplate (left/right) with compatible 3holes to 9 holes,s.s. 5.0mmlocking head screw (cortical)16mmto100mm(allsize)cancellouslockinghead screw(partiallyandfullytheaded)16mmto100mm 4.5mmcortical screw 16mm to 60mm 6.5mm cancellous screw (partially and fully theaded)any sizes , locking distal medial tibia plate 3.5mm (lt. & rt with compatible standard locking screw all size) all size 04,06,08,10,12 hole, s.s 3.5 locking head screw (cortical)12mm to 100mm cancellous locking head screw (partially and fully threaded)12mm to 100mm(all size) 3.5mm cortical screw 12mm to 60mm 4.0mm cancellous screw(partially or fully , locking distal medial tibia plate 3.5mm (lt. & rt with compatible standard locking screw all size) all size 04,06,08,10,12 hole, titenium 3.5 locking head screw (cortical)12mm to 100mm cancellous locking head screw (partially and fully threaded)12mm to 100mm(all size) 3.5mm cortical screw 12mm to 60mm 4.0mm cancellous screw(partially or fully threaded)all size , distal lateralfemur locking plate (left/right)with compatible screw 5 holes to 15 holes, s.s ( liss type) 5.0mm locking head screw (cortical)16mm to 100mm(all size) cancellous locking head screw (partially and fully threaded)16mm to 100mm 4.5mm cortical screw 16mm to 60mm(all size) 6.5mm cancellous screw (partially and fully threaded)all size , distal lateralfemur locking plate (left/right)with compatible screw 5 holes to 15 holes, titanium ( liss type) 5.0mm locking head screw (cortical) 16mm to 100mm(all size) cancellous locking head screw (partially and fully threaded)16mm to 100mm 4.5mm cortical screw 16mm to 60mm(all size) 6.5mm cancellous screw (partially and fully threaded)all size , dhsplate135degree4to14holeslongbarrel(dcpholes) withcompatiblescrew(allsize ) titaniumdhslagscrew50mmto 120mmwithcouplingscrew4.5mmcorticalscrew16mmto 60mm 6.5mmcancellous screw (partiallyand fully threaded)all size , dhs plate 135 degree 4 to 14 holes short barrel (dcp holes) with compatible screw (all size), s.s. dhs lag screw 50 mm to 120mm with top screw 4.5mm cortical screw 16 mm to 60 mm 6.5mm cancellous screw (partiallyand fully threaded) all size , dhs with trochanteric stabilization plate 135 degree long barrel withcompatiblescrewsize4holesto 14hole(allsize),s.s. dhslagscrew50mmto120mmwithtopscrew4.5mm corticalscrew16mmto60mm6.5mmcancellousscrew (partially and fully threaded) all size , peadiatrics dhs with trochanteric stabilization plate 135 degree longbarrelwithcompatiblescrewsize4holesto 14hole(all size), s.s.dhs lag screw 50 mm to 120mm with top screw 4.5mmcorticalscrew16mmto60mm6.5mmcancellous screw (partially and fully threaded) all size , dcsplate95(dcpholes)degreeanglelongbarrelwith compatiblescrewsize4holesto 14hole(allsize),s.s. dhs leg screw 50 mm to 12ömm with top screw4.5mm cortical screw 16 mm io 50mm 6.5mm cancellous screw (partially and fully threaded) all size , broad dcp 4.5 hole size with compatible screw(all size), s.s. 6 holeto16holes4.5mmcorticalscrew16mmto60mm 6.5mm cancellous screw (partially and fully threaded) all size , narrow dcp 4.5mm hole size with compatible screw(all size),s.s. 6 holes to 16 holes 4.5mm cortical screw 16 mm to 50mm 6.5mm cancellous screw (partially and fully threaded) all size , narrow dcp combihole (locking) 4.5mm hole size with compatiblescrew(allsize),s.s.6holesto16holes4.5mm corticalscrew16mmto50mm6.5mmcancellousscrew (partially and fully threaded) all size , small dcp combihole (locking) 3.5mm hole size with compatiblescrew(allsize),s.s.3holesto10holes3.5mm cortical screw 16 mm to 50mm , proximal humerus locking plate philos (low profile)with compatible screw 3 holes to 10 holes (all size), s.s. 3.5mm locking head screw (cortical) 12mm to 100mm cancellous locking head screw (partially or fully threaded) 12mm to 100mm3.5mm cortical screw 12 mm to 60mm 4.0 mm cancellous screw (partially and fully threaded) all size , proximalhumeruslockingplatephilos(lowprofile) with compatible screw 3 holes to 10 holes (all size), titenium3.5mm lockingheadscrew(cortical)12mmto100mmcancellous lockingheadscrew(partiallyorfullythreaded)12mmto 100mm 3.5mmcorticalscrew12mmto60mm4.0mm cancellous screw (partially and fully threaded) all size , t locking plate 3.5mm holes with screw (all size),s.s. 4 hole to 8 hole3.5mm locking head screw (cortical) 12mm to 100mm cancellous locking head screw (partially or fully threaded) 12mm to 100mm 3.5mm cortical screw 12 mm to 60mm 4.0 mm cancellous screw (partially and fully threaded) all size , reconstruction plate 4.5mm hole size with compatible screw (all size) recon, s.s. 4 hole to 10 hole 11 hole to 16 hole 4.5mm cortical screw 16 mm to 60mm 6.5mm cancellous screw (partially oll fully threaded) all size , reconstructionplate3.5mmholesizewithcompatiblescrew (allsize),s.s.4holeto10hole11holeto16hole3.5mm corticalscrew12mmto60mm4.0mmcancellousscrew (partially or fully threaded) any size , anatomical volar plate for distal radius with compatible screw (all size),s.s. , anatomical volar plate for distal radius with compatible screw (all size), titenium , 1/3 tubular plate 3.5mm dcp holes 4 holes to 12 holes(all size) ,s.s. 3.5mm cortical screw 12 mm to 60mm 4.0 mm cancellous screw (partially or fully threaded) any size , t oblique locking plate 3.5mm (left /right) with compatible screw(all size), s.s. 3.5mm locking head screw (cortical) 16mm to 100mm cancellous locking head screw (partially and fully threaded) 12mm to 100mm 3.5mm cortical screw 12 mm to 60mm 4.0 mm cancellous screw (partially and fully threaded) all size , lowcontactsmalldcp3.5mmholesizewithcompatible screw(all size), s.s. 4 hole to 10 hole 11 hole to 16 hole 3.5mm corticalscrew12mmto60mm4.0mmcancellousscrew (partially and fully threaded) all size , small dcp 3.5mm hole size with compatible screw(all size),s.s. 3 holes to 10 holes 3.5mm cortical screw 16 mm to 50mm , low contact narrow dcp 4.5mm hole size with compatible screw(all size),s.s. 6 holes to10 holes 11 holes to 16 holes 4.5 mm cortical screw 16mm to 60mm6.5mm cancellous screw(partially and fully theaded)all size , lowcontactbroaddcp4.5mmholesizewithcompatible screw(all size), s.s. 6 holes to 10holes 11holes to 16holes 4.5mmcorticalscrew16mmto60mm6.5mmcancellous screw (partially or fully threaded) any size , semi tubular plate 3.5mm dcp holes 4 holes to 12 holes(all size), s.s. 3.5mm cortical screw 12 mm to 60mm 4.0 mm cancellous screw (partially and fully threaded) all size , cortical screw 2.7 mm (all size), s.s. , drill bit 2.5,3.2,4mm. , cancellous screw cannulated 7mm/4mm, s.s. , cancellous screw 6.5mm(all size),s.s. , washer 4mm,6.5mm.,s.s. , herbert screw titaniumwith set (all size). , calcaneal plate with compitable screws (all size),titanium , locking reconstruction plate 3.5/ 5.0 mm hole size with compatible screw, s.s.(acetabular system) 4 hole to 10 nole 11 hole to 16 hole 5.0mm locking head screw (cortical) 16mm to 100mm cancellous locking head screw (partially or fully threaded) 16mm to 100mm 4.5mm cortical screw 16 mm to 60mm , locking plate extra articulardistal humerus(left/right) with compatible (j plate),s.s.screw4 holes to 12holes,3.5mm lockingheadscrew(cortical)12mmto100mmcancellous lockingheadscrew(partiallyorfullythreaded)12mmto 100mm 3.5mmcorticalscrew12mmto60mm4.0mm cancellous screw (partially or fully threaded) any size , mini dcp plate for metacarpal etc.4 to 8 holes compatible screw, s.s. mini screw 1.5mm to 2.7mm all size , endobutton (titanium) , endobutton (bio absorable) , titanium disk , fiber tape , interference screw (titanium) , interference screw (bio absorable) , anchor suture (titanium) all size (preloaded) , anchor suture (bio absorable) all size (preloaded) , variable angle dhs plate (ss) (125 145) degree with compatible screwsinclueding lag screw (all size) , humerus nail with locking bolt (all size).ss , eight plate for deformity correction (titanium) with compatible screws plate all sizes, cortical screw all sizes cancellous screw all sizes , curved pelvic reconstruction plate with compatible screws plate all sizes cortical screw all sizes cancellous screw all sizes , anatomical pelvic plate with compatible screws plate all sizes cortical screw all sizes cancellous screw all sizes , straight pelvic reconstruction plate with compatible screws plate all sizes cortical screw all sizes cancellous screw all sizes , y shape pelvic reconstruction plate with compatible screws plate all sizes cortical screw all sizes cancellous screw all sizes , straight pelvic reconstruction locking plate with compatible screws plate all sizes cortical screw(nonlocking) all sizes cortical screw(locking) all sizes cancellous screw(locking) all sizes , spring plate for fracture acetubalum with compatible screws plate all sizes cortical screw all sizes cancellous screw all sizes , j plate for anterior column fracture fixation with compatible screws plate all sizes cortical screw all sizes cancellous screws all sizes , dhs double angled 120 degree with compatible screws dhs plate (double angle 120 degree) all sizes cortical screw all sizes , locking raft plate for proximal tibia with compatible screws plate all sizes cortical screw(nonlocking) all sizes cortical screw(locking) all size cancellous screw(locking) all sizes , hindfootarthrodesisfusionnail/ttcfusionnailwith locking bolts nail all sizes locking bolts all sizes , distal femoral nail (supracondylar nail) with locking bolts nail all sizes locking bolts all sizes , bone cement ( pmma)20 gm high viscosity , bone cement ( pmma)20 gm intermediate viscosity , bone cement ( pmma)20 gm low viscosity , bone cement ( pmma) 40 gm high viscosity , absorbable calcium sulfate antibiotic carrier , locking/non locking fixation screws , lockingsaclavicleplate(left/right)6holesto8hole 3.5mm locking head screw (cortical) 12mm to 100mm cancellouslockinghead screw(partially andfully threaded) 12mm to 100mm3.5mmcortical screw 12 mm to 60mm 4.0 mm cancellous screw (partially and fully threaded) all size , locking sa clavicle hook plate (left /right) 4 holes to 6 hole3.5mm locking head screw (cortical) 12mm to 100mm cancellous locking head screw (partially and fully threaded) 12mm to 100mm 3.5mm cortical screw 12 mm to 60mm 4.0 mmcancellous screw (partially or fully threaded) all size , lockingsaclavicleplate(left/right)6holesto8hole 3.5mm locking head screw (cortical) 12mm to 100mm cancellouslockinghead screw(partially andfully threaded) 12mm to 100mm3.5mmcortical screw 12 mm to 60mm 4.0 mm cancellous screw (partially and fully threaded) all size , hooks supra laminar hook and infralaminar hook all size nharrington rods (a) in all size hooks blunt and sharp in all size drummond wires in all size and with washer in all siže fusion cages of dorsolumber spine in all size expandable cages of dorsal lumbar spine in all size transverse connector expandable cages of dorsal lumbar spine in all size , trochantric locking plate (proxiam! femur locking plate) 5 13 hole (left/right) with compatible screw 5.0mm locking head screw(cortical)16mmto100mmcancellouslockinghead screw(partiallyorfullythreaded)16mmto100mm4.5mm corticalscrew16mmto60mm6.5mmcancellousscrew (partially and fully threaded) all size , locking olecranon plate (lt. & rt with holes) 05,07,09,11 hole 3.5mm locking head screw (cortical) 12mm to 100mm cancellous locking head screw (partially and fully threaded) 12mm to 100mm 3.5mm cortical screw 12 mm to 60mm 4.0 mm cancellous screw (partially and fully threaded) all size , surgical stapler , locking anterolateral distal tibia plate 3.5mm(lt. & rt. with compatiblestandard lockingscrewallsize)04,06,08hole 10,12hole3.5mmlockingheadscrew(cortical)12mmto 10ommcancellouslockingheadscrew(partiallyandfully threaded)12mmto 100mm3.5mmcortical screw12mmto 60mm 4.0 mm cancellous screw (partially and fully threaded) all size , (1)locking plate posterolateral distal humerus with/without support (left/right)with compatible screw 3 holes to 11 holes 3.5mm locking head scre: (cortical) 12mm to 100mm cancellous locking head screw partial and fully threaded) 12mm to 100mm 2.7mm locking head screw (cortica) 12mm to 100mm 3.5mm cortical screw 12 mm to 60mm 4.0 mm cancellous screw {partially fully threaded) all size , (2)locking plate for distal medial humerus (left/right) with compatible screw 3 0holes to 11 holes 3.5mm locking head screw (cortical) 12mm to 100mm cancellous locking head screw (partially or fully threaded) 12mm to 100mm 2.7mm locking head screw (cortical) 12mm to 100mm 3.5mm cortical screw 12 mm to 60mm 4.0 mm cancellous screw (partially and fully threaded) all size , spine implants gardener well’s tong , crutch field tong , pedicle screw titanium (4.5 mm, 5.5 mm, 6.5 mm, 7mm, 7.5 mm,) polyaxial , monoaxial screws all sizes , connecting rods (compatible with above mentioned screws) all sizes. , ha coated polyaxial titanium pedicle screw (4.5 mm, 5.5 mm, 6.5 mm, 7mm, 7.5 mm) all sizes , fenestratedpolyaxialtitaniumpediclescrew (4.5mm, 5.5 mm, 6.5 mm, 7mm, 7.5 mm) all sizes , external fixtor half rings dia 60mm, 80mm, 100mm, 110mm, 120mm, 130mm, 140mm, 150mm, 160mm, 180mm, 200mm, 240mm , post female 2holes, 3holes, 4holes , post male 2holes, 3holes, 4holes , connection bolts 10mm, 16mm, 20mm, 30mm , nut 6mm, 13mm , connectimg tubular rod (all size) , universal clamp , rod to rod clamp , olive wire (beaded/non beaded) , schanz screw (cancellous ) all size , schanz screw (cortical ) all size , wire fixation bolt slotted , wire fixation bolt canulated , the rail fixation system rail fixation system 240mm ,300mm,400mm,600mm , allen key 6mm , central clamp , end clamp , swivel clamp , cd unit 40mm, 80mm , jess fixator distractorrods75mm,100mm,150mm,200mm,250mm, 300mm, , threaded 3.5mm & 2.5mm schanz pins , mini jess fixator clamp , 50mm, 75mm, rods , 1.5/1.8mm k wires , allen key , adjustable loop with button all sizes , titanium / bio interference screws all sizes. , dental fracture implant titanium 2, 3,4hole dental implant plate , titanium 2, 3,4hole l shapedental implant plate , titanium 2.5,3.5,3, mm screw , erichs arch plate , stainless steel wire 26 guage , locking raft plate for proximal tibia with compatible screws (all size) , trochanteric locking plate (proximal femur locking plate) with compatible screws (all size) , malleolar screw 4.5 mm all sizes , dhs double angled 120 degree with compatible screws (all size) , disposable sterile cement sryinge kit. , modified hydroxiapatite blocks small size. , absorbable calcium sulfate antibiotic carrier 10ml , puddu plate (high tibial osteotomy) with compatible screws , antibiotic impregnated nail tibia , antibiotic impregnated nail femur , antibiotic k wire all size , gigli saw wires , distal femoral nail (supracondylar nail) with locking bolts (all size) , radius neck/head fixation plate with compatible screws (all size) , ssg blade , thomas splint , humby knif (ssg) , periosteum elevator , nail implant removal set for various nail (complete set) , a set of enders nail procedure with instrument set (complete set) , a set of reconstruction plate procedure withvarious size screw with instrument (complete set) , a set of canulated screw with instrument (complete set) , electric plaster cutting machine , manual plaster cutter (pop cutter) , plaster cutter spreaders , plaster reduction clamp , a set of proxiwal hammer locking plate with various kind of plate , a set ofsquare nail with instrument withvarious size of nail , tebia interlocking implant instrument set with various size of nail set (complete set) , lead aprin front 0.50mm & back 0.25 mm , acetabulam surgical instrument set with recon plate, cc screw set , all recontruction instrument set, ethibond 1 0, 2 0, 5 0 endabuttom ss & bio fiber tap , hemiarthroplasty (prosthesis) implant instrument set with various size of hip prosthesis , femur interlocking implant ( instrument set) with various size of nail set (complete set) , humerus interlocking implant instrument set with various size of nail set (complete set) , an instrument set for dhs platting with various size of plates. (complete set) , an instrument set for dcs platting with various size of plate(complete set) , an instrument set for pfn procedure with various size of nail (complete set) , an instrument set for dfn procedure with various size of nail. (complete set) , an instrument set for femur coudyler platting with various size of plates (complete set) , an instrument set for tibia coudyler plating with various size of plates (complete set) , an instrument set for small fragment dcp, narrow dcp with various size of plate , ss player for tbw procedure , genex , synthetic calcium composite granules , shaver blade , endo button with loop loaded with fiber tap , root repait kit , ss k’wire cutter , circle wire role various gaze , a set type & other type of screw (complete set) with canulated screw set , a set of various size & shapes of k’wire , stinmin pin set (complete set) , digital electric pneumatic tourniquet (dual) (complete set) , drill machine electric (rechargeable) , homan’s retractor , bone holding forceps all size (complete set) , various size reamer’s for electric bone drill machine , double action bone nibbler , ss hammer , bone elevator , cheesal set , gooze set , chittal forceps , instrument , adison forceps , allis forceps 3x 4 tooth 6 , allis tissue forceps 6 , artery forceps – different sizes and types , artery forceps criles curved on flat box joint 5, 6, 7, 8, , artery forceps criles straight box joint 5, 6, 7, 8, , artery forceps kochers curved on flat box joint 160mm and 200mm , artery forceps straight kelly 5 678 , blakesley forceps , blakesley forceps different size and angles , bone nibbling ronguer forceps (kerrison) 9mm opening size : 1,2,3 , capsule forceps (arrugas) , capsulorhexis forceps very delicate extrauely thin 11mm long shanks (utrata) , carbide forceps , cervical biopsy punch forceps medium size , chalazion forceps oval, 13mm & 20mm diameter (desmarras) , cilia forceps (beer) , cilia forceps lightly angled, smooth jaws 9barraquer) , corneal forceps, castroviejo colibri/ or mc pherson very delicates 1x2 teeth 0.12mm with tying plate form straight & curved , corneal graft holding forceps (dastoor) , cu/piston holding/serrated forceps , cystotechotomy forceps bile duct dilators set of 9, 6 & 8 , d.b. tonsil holding forceps , dastoors superior rectus forceps s.s. , disc forceps (straight/upward/downward) , dissecting forceps plain 6 , dissecting forceps tooth 1x2, 6 , dissecting tooth forceps 1x2 tooth, 6 , enteropion forceps (snellen) , extraction forceps , eye dissecting fine forceps, serrated isi marked , fixation forceps grafes pattern fine toothed s.s. 1:2 & 3:4 isi marked , forceps (mini baskat/mini biopsy/grasping) , foreign body removal forceps , iris forceps very delicate curved (colibri) , lens holding forceps (mc pherson) smooth jws, 5mm long plateform 11mm angled for implanting iol , micro corneal forceps (hosking) straight fine (pierce type) , mosquito artery forceps (hartman) , mosquito artery forceps curved 5 , mosquito artery forceps curved. 5 , mosquito artery forceps straight 5 , mosquito artery forceps straight. 5 , mosquito forceps delicate 145mm long curued , negus tonsil holding forceps , ovum forceps haywood, smiths box joints s.s. straight & curved 8 size small, medium and large , plain forceps with criss cross serrated tips (bishop harmon) , ptosis forceps (berke) with side lock , pyelolethotomy forceps , ranger forceps , roberts pattern artery forceps size 22cms. , ronguer forceps for dcr size 1,2,3 s.s. (kerri son) , sinus forceps listers straight bos joint 6 (15.24cms) , sponge holding forceps 10 , sponge holding forceps 10 , sponge holding forceps 8 , sponge holding forceps foersters pattern 6, 8 & 10. , sterilizer forceps for bowls etc harrison with bow handle screw joint 16 (40.64 cms) , suture tying forceps smooth jaws 5mm platform straight mc pherson , suturing forceps castroviejo 1x2 teeth tying plate form straight 0.5mm. , tongue holding forceps 165mm , tooth forceps 8 , suture cutting scissor , volsellum forceps 10 , scissors straight with blunt point 5 (12.70cms), 6, 7”, 8”, 10” s.s , scissors (tailor) for cutting gauze & bandage. , scissors smiths pattern s.s size : 16,18,20 & 23 cm. , scissors listser pattern s.s. size : 18 cms , scissors dissecting curved on flat pattern s.s. 5 , scissors curved on flat s.s6 , fine scissors 4 straight & curved , plaster scissors bohlers 10¼ s.s. saw. , plaster cutting scissors 1 , scissors (hook/mini) , tenotomy scissors, stevens curve, blunt or straight isi marked , cardiac scissors , mayos scissors straight 6 , scissors sharp straight 6 ss , scissors straight 6 ss , turbinectomy scissors , scissors ss , dissecting forceps, toothed size 10, 12, 15 & 18cms. , randels pattern:renal stone forceps small, medium & large , rectal grasping & biopsy forceps , green armitez forceps (l.scs) , sterilizer forceps cheatles pattern 10 , allis tissue holding forcepssize 12, 15, 19,20,25cms. , babcooks tissue holding forceps size 16, 18,20,24cms , gall stone forceps desjardines pattern size 21, 23 cms. , randals pattern: bladder stone forceps , vallsellum forceps 9 & 10 , craniotomy forceps. , green army age forceps 8 & 9 , chital forceps jar s.s. grade 304/18/8 size 5 & 7 , magill forceps , s/c bone holding forceps 150mm 2 , s/c bone holding forceps 190mm 2 , s/c bone holding forceps 240mm 2 , patella forceps 175mm 1 , reduction forceps serr. 140mm 2 , reduction forceps serr. 180mm 2 , reduction forceps serr. 240mm 2 , reduction forceps pointed 140mm 1 , reduction forceps pointed 180mm 1 , reduction forceps pointed 210mm 1 , bone cutting forceps 190mm str./cv2 , screw forceps 1 , self centering bone holding forceps for small fragment 190mm 1 , reduction forceps with point 130mm , reduction forceps extra small 140mm 1 , screws holding forceps 1 , screws holding forceps 1 , punch forceps (up cutting/down cutting)(small/large ) (45 degree) , ring forceps , forceps bob cock 6 , tilley nasal forceps , luc/s forceps , forceps wough dissecting 7 , quinsy forceps , quinsy forceps , adson forceps , walsham forceps , asch forceps , giraffe forceps , proctoscope adult , ophthalmoscope direct (eye) , ophthalmoscope indirect (eye) , trial frame adult (eye) , trial frame child (eye) , prism bar (eye) , plastic sharps bins (for disinfection) , plastic bins for four colours (red, blue, yellow, and black) 25 ltr. , plastic bins for four colours (red, blue, yellow, and black) 50 ltr. , plastic bins for four colours (red, blue, yellow, and black) 100 ltr. , dust bin trolly with four wheel 660 ltr. , wheel barrow (for transport of bio medical waste) , rubber slippers , puncture proof translucent container (5 ltr.) , thick hand gloves , rubber boots , punch biopsy forcep 7. , wire holding forcep 1 , bowles 10cm s.s. , first aid surgical kit/dressing kit , pot’s scessor’s , amp sterlie , dressing drum isi marked big , dressing drum isi marked small , bp instrument led display , bp instrument with stand , bp instrument digital , ecg.electrode , iv stand , kneecap , l.s,belt (all size) , labor table isi marka , makintos rubber , nasal prong , oxygen regulator small , oxygen regulator with humdifire bottle , ot gown , plastic apran , kallis pad , hole sheetl for ot1*1 , hole sheet for ot1*2 , plane sheet for ot1*1 , plane sheet for ot1*2 , delivery kit disposable , general drape kit , hiv/hbsag disposable ot kit , gyanac pack , knee o drape , cesarian drape , bilateral knee o drape , hip u drape , plan sheet lagre (nw) , o hole drape , major drape , half gown , cling drape , meternity drape sheet , bbr graph paper , fiber tip pen , tunicate , band aid , lr aprin (reusable) , autoclave indicator tap , led barriar with led glass , ss tank with lid 13.5 ltr. , led number/alphabet , needle holder 6,8 ss , kidney tray medium size , tuning fork (ent) , indirect layngel miror (ent) , otoscope (ent) , wax probe (ent) , headlight miror (ent) , ventouse cup 70mm , manual pop plaster cutter , t. handle , bone nobbler , electric pop cast cutter , fiber electric plaster cutter , autoclave tape , medicine trolly , flux meter , digital room thermometer , stethoscope pediatric , stethoscope adult , instrument tray s.s. , glucometer , glucometer strip , pateint stool revolwing , formiline chamber , hydrolic o.t. table matress , wheel chair , face shield , ppe kit , b.p. armlet for multipara monitor , b.p. armlet complet (all item) , examination coach with matress , sharp contener white 3 ltr. , sharp contener blue 5 ltr. , thomas splint , humby knif (ssg) , disposable shoe covers , o.t. sleeper size 6,7,8,9,10,11, , three bucket trolly with bucket 35 lit each bucket , trolly wheel with both side bearing size6 , ecg machine single channel , egc machine six channel , nebulizer machine , nedulizer mask (pediatric) , nedulizer maks (adult) , needle destroyer electric , eco shield , ecg cable single channel , ecg cable six channel , ecg cable 12th channel , digital weight machine adult , digital weight machine pediatric , urine port male , urine port female , kurta payjama for o.t. , pulseoxcy meter (finger) , x ray veiw box led , foot step , o.t. table mattress , instument trolly , lock tag (five color) , thermometer digital freezer unit , thermometer infrared , sims speculam , digital weight scale baby , height scale baby , height scale adult , crash cart trolly , elbow length gloves , surgical cap , s.s. cureite/scoop heavy , ot green plain towel 3 x 6 , osteotoure set ss heavy , mva set , ambu bag adult , ambu bag child , arthroscopic system , arthroscope 4 mm, 30° & 70° inclination , light source & light cable , camera system & monitor , video recorder , monitor , arthroscopic probe , arthroscopic punch , arthroscopic grasping forceps , arthroscopic motorised instrument shaver , arthroscopic electrocautery , arthroscopic acl, pcl set , id tag for neonatal pink, blue , blue corrugated box 5 kg capacity , arthroscopic scissors , dental department , extraction forceps kit , extraction elevator kit , surgical set , mouth mirror , twizzer , explorer , mouth probe , chisel 5mm , chisel 7mm , malet , tissue holding forcep , round condenser , ball burnisree , spoon excavator , cement spatula , glass slab , cotton holder , spirt lamp , endo box , bur box , airrotor burs round , airrotor burs straight fissue , cavitemp , ca (oh) 2 paste , suctiontips , composite kit , gic restorator gc , broaches 15 no. , broaches 20 no. , broaches 25 no. , formocresol , edta tubes , zoe powder , eligenol liquid , bone reunger , bone filer , k. files 25mm (10 no.) set , k. files 25mm (15 no.) set , k. files 25mm (20 no.) set , k. files 22mm (25 no.) set , g. p. points (15 no.) set , g. p. points (20 no.) set , g. p. points (25 no.) set...

Indian Army - Rajasthan

39957342 bids are invited for target tin sheet fig 11 , target tin sheet fig 12 , target paper , barrel target , wooden blocks total quantity : 970...

Public Works Department - Rajasthan

39928674 supply of civil, painting and sanitary items for maintenance work in bikaner house, new delhi ( year 2023 24 ) ( fd paid id 86960 ) 1 supply of portland cement ( opc 43 grade ) 50 kg bag 2 supply of coarse sand ( zone ill ) as approved by engineer incharge. 3 supply of fine sand ( zone iv ) as approvcd by engineer incharge. 4 supply of glue 5 brass tower bolt ( barrel type ) 250x 10 mm 6 brass handles 125 mm with plate 175x32 mm 7 brass door latch 300x16x5 mmweighing nor less than 0.380 kg 8 chromium plated brass handles 125 mm with plate 175 x32 mm 9 supply of hydraulic open door closer or godrej make or equivalent and as approved by engineer in charge 10 stainless steel butt hinges 100x58x1.9 mm is: 12817 marked 11 supply of premium quality ultra tile blocks for driveways, walkwass, sitouts etc. design and — colour approved by eic 12 9 mm thick commercial ply 13 cementitious water proofing coating with elastic polymers 14 12.5 mm thick class fibre reinforced gypsum boardu., 1 supply of plaster of paris as approved by engineer in charge 2 supply of jk wall! flirla putty as approved by engineer in charge 3 supply of premium acrylic exterior paint as approved by fngineer in charge 4 supply or synthetic cnamcl paint in all shades excepi black or chocolate shade as approved by engineer ln charge 5 supply of plastic emulsion paint as approved by engineer in charge 6 supply of oil bound washable distcmper / aczylic distemper as approved by engineer in charge 7 supply of white cement as approved by ingineer in charge 8 spirit 9 red oxide zinc chromate primcr 10 linseed oil ( double boiled ) 11 floor enainci paint in all shades except green 12 silicon sealant., i supply of 2 in i health faucet of prayag make. ( 1 mtr. braided tude ) with hook 2 waste pipe with g.1 ( b class ) 32mm 3 supply of unplasticised p.v.c. connection pipe with brass union 45 cm long 15 mm bore. approvcd by engineer in charge 4 c.p. brass centre hole basin mixer with cast spout 5 chlonnated polyvinyl chloride ( cpvc ) pipe 15 mm nominal dia 6 chlorinated polyvinyl chloride ( cpvc ) pipe 25 mm nominal dia....

Sawai Man Singh Medical College - Rajasthan

39893795 tender for supply for surgical, consumable and disposable items 2 percutaneous endoscopy gastrostomy set 3 10% hydrogen peroxide with 0.1 % silver ions should be safe, non mutagenic, non carcinogenic, should not contain quarternary ammonium compounds, 1 liter 4 20 / 22g in 20 / 15 cm infusion device with huber bevel for implantable ports 5 3fr picc line, reverse taper polyurethane, microintroducer 45cm length usfda approved 6 4% chg surgical scrub passes en1499 certification 1250ml 7 4fr picc line with silicon material single lumen 60cm long, micro introducer requiring only saline flush.should be us fda 8 7.5% povidone iodine surgical scrub 1250ml 9 70% v / v isopropyl alcohol with surfactant and corrosion inhibitors with hand sprayer for rapid surface disinfection500 ml 10 79.9% v / v ethanol ip gel with emollients and moisturisers passes en13727 en13624 standard 500 ml 11 79.9% v / v ethanol ip gel with emollients and moisturisers passes en13727 en13624 standard 1 ltr. 12 a.v. fistula needle rotating wing typehaving back eye 16 g 13 a.v. fistula needle rotating wing typehaving back eye 17 g 14 abdominal drainage kit no. 16, 18, 20, 22 & 24 15 absorbable gelatin based topical absorbable flowable hemostat with 6cc syringe pre filled with hemostatic matrix. with 14.3 cm white applicator tip & 14.6 cm blue flexible applicator tip 16 absorbable regenerated cellulose size 20 x 7 x 0.05 cm 17 absorbent cotton 100 gm 18 absorbent cotton 200 gm 19 absorbent cotton 400 gm 20 absorbent cotton 500 gm 21 acetic acid 10 ltr 22 acrylic adhesive based dressing coated with medical grade, bio compatible latex free size : 10cm x 5cm 23 adhesive plaster 5cm x 5mtr. 24 adhesive releaser / remover with 100% blend of hexamethyldisiloxane, hmdso, octamethytrisiloxane 28ml 25 adhesive tape silicon backing rayon & polyester fiber with resinm co polyester film, silicon release coating size 1.2 cm x 1.3 mtr 26 adhesive tape silicon backing rayon & polyester fiber with resinm co polyester film, silicon release coating size 2.5 cm x 1.3 mtr 27 adult single heated wire breathing systemwith autofill humidification chamber in sterile pack and us fda / europian ce approved. should be compatible every humidifier. 28 adult universal heated wire breathing system withdetachable inspiratory and expiratory temperature ports with autofill humidification chamberwith dual heated wire system ininspiratory limb and in expiratory in sterile pack and us fda approved. should be compatible with every humidifier 29 nebulization chamber for pediatric patients for compression nebulization 30 nebulization chamber for adult patients for compression nebulization 31 alkyldimethylbenzyle amonium chloride 2.37% alkyldimethylethylbenzyle amonium chloride 2.37% with inert ingredients. 32 cling wrap 30 meter heat resistant food grade plastic film 33 aluminium foil 34 anal dilator set 9 / 10, 11 / 12, 12 / 14, 13 / 14, 15 / 16 35 anatomical face mask ( for anaesthesia ) 36 anesthesia circuit corrugated 37 anesthesia circuit expandable 38 antibiofilm wound gel with 0.1% polihexanide and 0.1% betaine and glycerol ( 30ml ) 39 antiseptic scrub containing chlorhexidine gluconate soln. 4% 100ml 40 antiseptic scrub containing chlorhexidine gluconate soln. 4% 500ml 41 antiseptic soln. containing : chloroxylenol approx 5% terpineol approx 10% 100ml 42 antiseptic soln. containing: chlorhexidinegluconate 2% ethanol i.p.80% v / v 43 antiseptic soln. containing: chlorhexidine 1.5% cetrimide 3% 50 ml 44 antiseptic solution containing 2 propanolol benzalkonium chloride 500 ml 45 antiseptic solution containing: chlorhexidine gluconate soln. 7.5% v / v ceterimide 15% w / v isopropyl alcohol 7% v / v 1ltr. 46 antiseptic solution containing: chloroxylenol approx 5% terpineol approx 10% 100 ml 47 antiseptic surgical and scrub composition: chlorohexidinegluconate 20% v / w with organic surfactants and free fromsls with moisture and skin softener 48 antiseptic tulle dressing 10 cm x 10 cm 49 autoclave tape – steam sterlization tape for sterilization packages tapes conform to en iso 11140 1, class 1 steam tape changes color from white to brown / black when exposed to steam sterilization conditions two widths, 18 mm & 24 mm fits with tape dispenser for two rolls 50 blood tubing set for hemodialysis 51 b.p. blade no. 10, 11 & 15 52 b.p. cuff complete large / medium / small 53 fascial dilators size 5& 6 54 baby dress set jhabla, cap, mittens, socks 55 bacterial and virus hme filter 56 bain circuit ( adult ) 57 bain circuit ( child ) 58 bandage 10cm x 4 mtr 59 barrier spray with 100% blend of hexamethyldisiloxane, hmdso, trimethylated silica, trimethylsiloxysilicate ( tms ) and zanthalene 50ml 60 pediatric bloodlines ( dehp free ) for hemodialysis av set fmc paed. / baby, inner diameter pump segment 6.4 mm 61 surgical gloves with indicator system 6.5 62 surgical gloves with indicator system 7.0 63 surgical gloves with indicator system 7.5 64 surgical gloves with indicator system 8.0 65 surgical gloves with indicator system 8.5 66 biopolymeric hydrogel dressing 10x10 cm 67 biopsy needle 16gx10, 18gx10, 18gx16 should be compatible with reusable magnum corebiopsy instrument. 68 black disinfectant fluid phenolic type , grade – 3 20 ltr 69 black disinfectant fluid phenolic type , grade – 3 5 ltr 70 bladeless trochars 5mm 71 blood transfusion set 72 blood transfusion set with luer lock 73 bowie dick test – sheet designed for daily monitoring of re vacuum steam sterilizers to detect air leaks, inadequate steam penetration and vacuum pump failures. conform to iso 11140 1, type 2 specific tests and iso 11140 3 test methods for evaluating the sterilizer’s effectiveness at steam penetration and air removal. test sheet is placed inside a towel pack in the sterilizer at the most difficult to sterilize location and run through a sterilization cycle for 3.5 minutes at 134°c. clear color change – blue to black 74 bowie dick test pack – mini for monitoring of pre vacuum sterilizers for air removal , can be used in 134oc sterilization, new superior diagnostic technology , unique compact design , clear color change – purple to green space saving credit card size. size of individual card: l 90 mm, w 46 mm lead free and no toxic heavy metals recordable conforms to en iso 11140 4 75 manual handheld breast pump 76 breathing circuit corrugated 77 bronchial blocker size 6 78 brt gastrostomy feeding tube made of silicon with clearly marked feeding, medication and baloon ports, ventilated external ring, radiopaque strip and graduated centimeter marking. size: 12 fr, 14fr, 16fr, 18fr 0112 12, 0112 14, 0112 16, 0112 18 79 caps for bubble cpap size ranging from extreme preterm to term 80 bubble cpap circuit with nasal cpap kitshould contain neonatal inspiratory limb heated wire • with incubator extension • with expiratory limb • bubble cpap generator • pressure relief valve 40 cmh2o • universal 22mm connector • 15f / 8m connector • 15f / 10m connector • auto fill humidification chamber 81 humidification chamber for use in invasive and non invasive ventilation. should be auto fill and compatible with all circuits and heated wires 82 bubble tube for suction 10 mtr. 83 bugbee electrode for ablation / coagulation of soft tissue 84 cannula splint for cannula fixation 85 caps for term and preterm new born 86 catheter mount corrugated tube 87 catheter mount expandable tube 88 cautery pencil disposable electrosurgical finger switch pencil 3 m cable 3 pin connectivity 89 cautery tip reusable 90 chest drainage catheter with trocar no. 12, 14, 16, 18, 20, 22 24 91 chlorhexidine gluconate solution ip 2.5 % v / v ( equivalent to chlorhexidine gluconate 0.5 % w / v ) and ethanol ip 70 % v / v emollient & moisturising agents 500 ml passes en 1040 standards 92 close suction system size 5fr 93 close suction system size 6fr 94 close suction system size 7fr 95 close suction system size 8fr 96 closed wound suction unit no. 10, 12 97 closed wound suction unit no. 14, 16, 18 98 closed wound suction unit no. 6, 8 99 catheter mini mid line size 18, 20, 22 100 colostomy kit for pediatric and patient ( 1 ) single piece ostomy appliance having triple hydrocolloid skin barriercomprising of elastomeric polymers with flexible tape collar integrated wth opaque drianable pouch 12 ( inches ) and one sided comfort panel 15bags per kit ( 2 ) should have sting free adhesive releaser / remover with 100% blend of hexamethyldisiloxane, hmdso, octamethytrisiloxane , film free from alcohol, preservatives used for removal of strong adhesive dressings, helps in removal without pain & skin tear : 28 ml bottle qty 1pc in kit ( 3 ) ( c ) should have barrier spray with 100% blend of hexamethyldisiloxane, hmdso, trimethylated silica, trimethylsiloxysilicate ( tms ) and zanthalene 28 ml bottle qty 1pc in kit ( 4 ) should have hydrocolloid based skin protection paste 56.7 gms qty 1pc in kit ( 5 ) should have hydrocolloid based skin protection powder 28.3 gms qty 1pc in kit ( 6 ) self adherent moist wound dressing made up to triple hydrocollid elastomeric polymer matrix 10cmx10cm qty 5 units in kit. 101 core biopsy gun ultra reusable automatic biopsy instrument is a reusable device that utilizes disposable needles to harvest high quality histological specimens. us fda approved 102 corrugated drainage sheet 103 cotton cradle sheet to be used on cradle 104 crape bandage 10cm x 4m 105 cut filter for nikksio dialysis machine 106 guide wire 2.5f 107 guide wire 3.5f 108 guide wire 3f 109 guide wire 4f 110 d.j. stent no. 3 fr 12 cm 111 d.j. stent no. 3.5f 16cm 112 d.j. stent no. 3.5f 16 cm 113 d.j. stent no. 4.5 114 d.j. stent no. 4f 16cm 115 uterine dilators hegar double ended 13 14 mm 116 uterine dilators hegar double ended15 16 mm 117 dialyzer artial venous blood tubing set 118 dialyzer f3 119 dialyzer f4 120 dialyzer f5 121 dialyzer f6 122 dialyzer reprocessing concentrate cleaner contains: hydrogen peroxide 18 to 22% par acetic acid 5% acetic acid 7 to 9% 5 ltr 123 diasafe plus dialysis fluid filter 124 digital thermometer 125 disinfectant 0.55% 1, 2 benzenedicarboxaldehyde effective against tb and gta resistant strains 5 ltr 126 disinfectant with multi enzyme 100 gm of the granules contains active ingredients 43.0gm sodium percarbonate , 22.0gm tetraacetylethylenediamine and enzymes 1.5 kg 127 disposable abdominal laproscopic ports 128 disposable biopsy forceps for ugi endoscope : channel size 2.8 mm 129 disposable bone marrow aspiration needle with adjustable depth guard and cap. should have sharp lancet point to penetrate. should be available in 15 gauge with adjustable length of 24mm & 48mm. 18 gauge with adjustable length of 14 &48 mm length. should be usfda approved. 130 disposable bone marrow biopsy needle should have lightweight handle with built in comfort knob. should have bevel tip for easy coring of bone. should have bevel cannula tip. should have tapered distal cannula for easy recovery of sample. should be available in 8 gauge in 4 inch length, 11 gauge in 4 inch & 6 inch length, 13 gauge in 2 inch & 3.5 inch length, usfda approved. 131 disposable cautery pencil 132 disposable coaxial core biopsy ( guide ) needle should have engineered compatibility withbiopsy enhance efficiency and accuracy. 133 disposable continue positive airway pressure kit 134 disposable endotracheal tube with cuffno. 5, 5½, 6, 6½, 7 135 disposable endotracheal tube no. 2½, 3, 3½, 4, 4½, 5, 5½, 6, 6½, 7 136 disposable gowns for biopsy / cannulation 137 disposable hiv / hbsag precaution kits 138 disposable inflatable anaesthetia face mask should have soft cushion when inflate, size 0, 1, 2, 3. us fda / ce approved 139 disposable laryngoscope miller blade 140 disposable oxygen mask child with nose clip 141 disposable oxygen mask child without nose clip 142 disposable plain sheet 120cm x 210cm 143 disposable shoe cover 144 disposable surgeon’s cap 145 disposable surgeon’s face mask 146 disposable syringe with needle 1 cc 147 disposable syringe with needle 5 cc 148 disposable syringe with needle 10 cc 149 disposable syringe with needle 2 cc 150 disposable syringe with needle 20 cc 151 disposable syringe with needle 3 cc 152 disposable syringe without needle 50 cc 153 disposable three layer mask 154 disposable tongue depressor 155 disposal transducer with integrated flashing device with color tubing should be ce / usfda approved 156 distilled / deionized water 5 ltr. 157 double luman catheter 8 fr x 9cm 158 double lumen bronchial tube left / right no.26 159 double lumen catheter withkitinternal jugular catheter should be made of flexible radio opaque polyurethane with a radio opaque tip ( easy visualization in x ray ) accessory should be provided as contains ( catheter , dilator, introducer needle18g , guide wire with dispenserand inj. caps ) catheter should be double d shep to have and consistent blood flow with laser cut side slot. catheter should be us fda or ce approved ( certificate must be enclosed ) . size8 fr x 12 cm 160 double lumen catheter withkitinternal jugular catheter should be made of flexible radio opaque polyurethane with a radio opaque tip ( easy visualization in x ray ) accessory should be provided as contains ( catheter , dilator, introducer needle18g , guide wire with dispenserand inj. caps ) catheter should be double d shep to have and consistent blood flow with laser cut side slot. catheter should be us fda or ce approved ( certificate must be enclosed ) . size9 fr x 11 cm 161 double lumen catheter withkitinternal jugular catheter should be made of flexible radio opaque polyurethane with a radio opaque tip ( easy visualization in x ray ) accessory should be provided as contains ( catheter , dilator, introducer needle18g , guide wire with dispenserand inj. caps ) catheter should be double d shep to have and consistent blood flow with laser cut side slot.catheter should be us fda or ce approved ( certificate must be enclosed ) .size10 fr x 12 cm 162 double lumen catheter withkitinternal jugular catheter should be made of flexible radio opaque polyurethane with a radio opaque tip ( easy visualization in x ray ) accessory should be provided as contains ( catheter , dilator, introducer needle18g , guide wire with dispenserand inj. caps ) catheter should be double d shep to have and consistent blood flow with laser cut side slot. catheter should be us fda or ce approved ( certificate must be enclosed ) . size11 fr x 13 cm 163 double lumen catheter withkitinternal straight catheter should be made of flexible radio opaque polyurethane with a radio opaque tip ( easy visualization in x ray ) accessory should be provided as contains ( catheter , dilator, introducer needle18g , guide wire with dispenserand inj. caps ) catheter should be double d shep to have and consistent blood flow with laser cut side slot. catheter should be us fda or ce approved ( certificate must be enclosed ) . size8 fr x 9 cm 164 double lumen endotracheal tubes all sizes 165 double lumen polyurethene catheter clear extensions and pinch clamps, cannula introducer, steel needle introducer, vessel dilator, seldinger wire advancing device with guidewire, 5ml syringe, luer lock plugs and secondary fixation devices. size 7fr. lrngth 15cm. should be ce / usfda approved. 166 double lumen umblical catheter pur xro 40cm with 4.5 fr and 20cm with 4fr with distal eye on rounded tip for multiple access with 5cm extension tube with clamp with fenale leurlock colour coded port . us fda / ce approved. 167 double valve connectors to prevent catheter occlusion 168 duodenal feeding tubes pur+silicon with 2 lateral eye universal colour codewith flexiable female mount & cap4, 5, 6, 7 fr with 40cm / 75cm / 125cm us fda / ce approved 169 e.t. tube with secondary lumen for surfactant size 2½, 3, 3½, 4, 4½ 170 ecg electrode ( paed. size ) 171 edta vial 2ml with label 172 edta vial k3 173 elastic adhesive bandage 10cm x4mtr 174 elastic adhesive bandage 10cmx1mtr 175 emergency catheter designed for high flow rate infusions ptfe material construction for rapid short term insertion into central veins or large peripheral vessels. size: 22g, 20g 176 emergency disposable cpap kit comes with 2 device, 3 mask. menometer, harness, flow meter, fio2 regulator, nebulizer 20ml syringe 177 emulating indicator 7a – steam clear color change – purple to green, self adhesive for easier record keeping – just peel off back cover, superior diagnostic ink technology, lead free and no toxic heavy metals, can be used as a permanent record, conforms to en iso 11140 1, type 6, square type size, cycle specific calibrations 178 epidural kit containing lor syringe , filter, catheter needle no. 16 179 epidural kit containing lor syringe , filter, catheter needle no. 18 180 epidural kit containing lor syringe , filter, catheter needle no. 19 181 epidural kit containing lor syringe , filter, catheter needle no. 20 182 epidural kit containing lor syringe , filter, catheter needle no. 22 183 epidural needle no. 16, 18, 19 , 20, 24 184 et holder neonatal 185 sterile gloves all sizes 186 eye mask for phototherapy 187 fenestrated sterile surgical drape 2 layerwith surgical incision film. 120x150 cm 188 fiber optic laryngoscope paed. set should be led white light should have mat finish with slim paed. handle miller blade size 00, 0, 1 189 flexible & water proof arm board constructed from soft polyurethane foam with an aluminium strip core, they can be easily shaped and positioned to the patient without losing their profile 190 flow regulator with extension set 191 flow oriented lung volume exerciserpediatric, dual chamber design made with break resistant material. variable flow incentive spirometer range ( 200 to 1200ml / sec ) with a mouthpiece and a corrugated tubing. clearly marked flow settings: 200, 400, 600, 800, 1000 & 1200 ml / sec. shell, corrugated tube, mouth piece & ball must be of polypropylene ( pp ) . us fda registered & if applicable 510k. must be us fda / bis / ce certified with icmed 13485 or iso13485 certification. 192 formaldehyde soln. 5 ltr. 193 formaldehyde soln. 500 ml 194 four way stop cock 195 friction buster of all surgical instruments which should be water miscible, heat permiable and autoclavable medical grade liquid paraffin. 196 fully transparent backing, absorbent pad, hypoallergenic acrylic adhesive size 5 cm *7 cm 197 fully transparent backing, absorbent pad, hypoallergenic acrylic adhesive size 6 cm *10 cm 198 gastrostomy tubes small size 199 gauze than 90cmx18mtr 200 glutaraldehyde 2% soln. 5 ltr. 201 glutaraldehyde 2.45% soln. 5 ltr. 202 glutaraldehyde based high level disinfectant containing: ortho phthalaldehyde 0.55% 203 guedel airway 204 h.d. fluid ( part – a ) 1016 compatible with bibag 205 h.d.solution, sodium bicarbonate powder 820gms ( part b ) 206 haemodialysis fluid acetate formulation 10 ltr. jar company must be iso and gmp certified ( certificate must be enclosed ) . 207 haemodialysis solution fluid concentrate ( part a ) 208 hand rub antiseptic soln 100gm contains 2 propanolol 45gm 1 propanolol 30gm macetronium ethyl sulphate 100 ml 209 hand rub antiseptic soln 100gm contains 2 propanolol 45gm 1 propanolol 30gm macetronium ethyl sulphate 500 ml 210 hand rub with skin emollient soln 100ml contains isopropyl alcohol ( 2 propanolol ) 50%v / v n propanol ( 1 propanolol ) 30%v / v skin emollient 0.2%v / v 100 ml 211 hand rub with skin emollient soln 100ml contains isopropyl alcohol ( 2 propanolol ) 50%v / v n propanol ( 1 propanolol ) 30%v / v skin emollient 0.2%v / v 500 ml 212 handrub containing: chlorhexidine gluconate soln. 2.5% ethyl alcohol 70% 100 ml 213 handrub containing: chlorhexidine gluconate soln. 2.5% ethyl alcohol 70% 500 ml 214 harmonic probes with hand piece 215 hd catheter no 9 curved 216 hd catheter no 9 straight 217 hd double lumen catheter 11.5fr 13.5cm 218 hd double lumen catheter 8fr 9cm 219 hd double lumen catheter 9fr 9cm 220 head positioner to support head of new born 221 hemlich valve adapter 222 hemodialysis catheter pur fr 102lumen + pur 10 cm ext. tube with colour clip to identify , radioopaque with seldinger technique , with fixing wingstraight positionlength 15cm ( 300ml / min ) & 20cm ( 280ml / min ) centimetre graduation from 9 cm to distal tipus fda / ce approved 223 hemodialysis catheter pur fr 122lumen + pur 10 cm ext. tube with colour clip to identify , radioopaque with seldinger technique , with fixing wingstraight positionlength 15cm ( 410ml / min ) & 20cm ( 390ml / min ) centimetre graduation from 9 cm to distal tip us fda / ce approved 224 hemodialysiscatheter purfr 12 2 lumen radioopaque with seldinger technique + pur 10 cm ext. tube with colour clip to identify , with fixing wing clip alloy pigtail curved positionlength 15cm ( 380ml / min ) & 20cm ( 360ml / min ) centimetre graduation from 9 cm to distal tipus fda approved 225 hemodialysiscatheter pur fr 123lumen + pur 10 cm ext. tube with colour clip to identify , radioopaque with seldinger technique , with fixing wingstraight positionlength 15cm ( 410ml / min ) & 20cm ( 390ml / min ) centimetre graduation from 9 cm to distal tip, 16g distal code green with flow rate high 50 55 ml / minfor drug administration during hemodialysis us fda / ce approved 226 hemodialysis catheter pur fr 10 2 lumen catheter + pur 10 cm ext. tube with colour clip to identify , radioopaque with seldinger technique, with fixing wing clip alloy pigtail curved positionlength 15cm ( 230ml / min ) &20cm ( 200ml / min ) centimetre graduation from 9 cm to distal tip us fda / ce approved 227 hepa filter 228 hydrocolloid non suture picc line fix with velcro to seure picc line wings 229 hydrogel electrode 230 hypospadias stent kit size 6, 7, 8 & 10 open end 231 hypospadias stent kit size 6, 7, 8 & 10 closed end 232 hypoalergic surgical paper tape 1x9mtr 233 hypoalergic surgical paper tape 2x9mtr 234 hypoalergic surgical paper tape 3x9mtr 235 hypoallergenic silk like cloth surgical tape 1” x 9m 236 i.v. infusion set with needle having built in air vent 237 icd trocar connector to connect trocar with hemlich valve or under water seal recommended to use only on 8amd 10 fr trocar 238 infant feeding tube no. 5, 6, 7, 8, 9, 10 239 injector for gastroscope : channel size: 2.8mm 240 insulin syringe 30g 40 units 241 intercostal drainage tube with trochar no. 10, 12, 14 &16 242 intravenous transparent film dressing wih border for neonates & pediatrics size: 5cm x 5.7 cm 243 isopropyl alcohol 70% with benzalkonium chloride soln. 0.5% 250 ml 244 isopropyl alcohol 70% with benzalkonium chloride soln. 0.5% 5 ltr 245 iv cannula 24g, sterile disposable, single use teflon / ptfe, with metal guide 246 iv cannula 26g, sterile disposable, single use teflon / ptfe, with metal guide 247 iv set with flow regulator with flow rate 2ml to 350 ml per hour 248 jackson patt drinage set 249 jejunostomy tubes 250 collagen gel type i, hydrogel based with at least 80% water content with ph between 5.5 6.0 251 jackson rees circuit pediatric size 252 k 90 catheter 253 k 91 catheter 254 kit for picc insertion with stariledrape and other essential accessories 255 kmc gown for mothers 256 kolhars t tube no.6, 8, 10, 12 14 257 lancet 30 g 258 latexmaterial one way valve for icd drain which replace underwater seal 259 laryngeal mask airway in sterile pack, made of medical grade pvc, should not contain any metal or spring in pilot ballon, size 1, 1.5, 2, 2.5, 3 260 reusable laryngoscope handle with stainless steel miller and macintosh blades of all sizes 261 latex folley balloon catheter no.6, 8, 10, 12, 14, 22, .24 262 latex free reservoir bag. sizes: 0.5 litre, 1 litre, 2 litre. 263 leucocyte removal filter 264 linear cutter cartridge 55mm 265 linear cutter cartridge 100mm 266 linear cutter cartridge 75mm 267 lma gastro airway 268 long line catheter no. 20, 22 269 long term hemodialysis catheter ( expert ) antimicrobial +pur fr 122 lumen + pur 10 cm ext. tube with colour clip to identify , radioopaque with seldinger techniqueagion incorporate with pur , with fixing wingstraight positionlength 15cm ( 410ml / min ) 20cm ( 390ml / min ) 24cm ( 370ml / min ) ml / mincentimetre graduation from 9 cm to distal tip, us fda / ce approved 270 long term hemodialysis catheter ( expert ) antimicrobial +pur fr 102 lumen + pur 10 cm ext. tube with colour clip to identify , radioopaque with seldinger techniqueagion incorporate with pur , with fixing wingstraight positionlength 15cm ( 300ml / min ) & 20cm ( 280ml / min ) 15cm+20cmcentimetre graduation from 9 cm to distal tip, 16g distal code green with flow rate high 55 / 50 ml / minfor drug administration during hemodialysis us fda / ce approved 271 long term tunneled central venous catheters for pediatrics, size 2.7 fr, usfda and ce approved, radiopaque silicon material 272 lubricant solution product should have good lubricating quality. should have contained water soluble liquid paraffin with low stickiness. it should available in both spray and liquid form. standardized manufactured should be recommended. 273 lumber puncture needle no. 18, 19, 20, 22, 23, 25, 27 274 macintosh sheet 275 malecot catheter no. 12 276 malecot catheter no. 14 277 malecot catheter no. 16 278 malecot catheter no. 18 279 malecot catheter no. 20 280 malecot catheter no. 22 281 malecot catheter no. 24 282 measured volume infusion set 110 ml 283 measured volume infusion set 150 ml 284 mic key button 285 mickey feeding tube medical grade silicone construction, proximal anti reflux valve, gamma sterilized, secure lock extension set connector mechanism, radiopaque strip. size: 12, 14, 16, 20 fr 286 microlaryngeal tube with high volume, low pressure cuff continuous x ray marker, blue pilot ballon. 287 microporuous surgicalpaper tape with cutter 3” x 9m 288 microporuous surgical paper tape with cutter 1” x 9m 289 microporuous surgical paper tape with cutter 2” x 9m 290 mini bag set 291 mini vac set 292 minigrip m / s alligator grasper ( 2.4mm ) 293 minigrip m / s babcock grasper ( 2.4mm ) 294 minigrip m / s clutch grasper ( 2.4mm ) 295 minigrip m / s tong grasper ( 2.4mm ) 296 minilap m / s babcock thumb grip graspers ( 2.3mm ) 297 minilap m / s bowelthumb grip graspers ( 2.3mm ) 298 minilap m / s clutch thumb grip graspers ( 2.3mm ) 299 minilap mis alligator thumb grip graspers ( 2.3mm ) 300 minipoler percutaneous monopolar conical probes ( 2.4mm ) 301 minipoler percutaneous monopolar curved spatula probes ( 2.4mm ) 302 minipoler percutaneous monopolar hook probes probes ( 2.4mm ) 303 minipoler percutaneous monopolar straight spatula probes ( 2.4mm ) 304 mittens for term & preterms new born 305 mucus extractor 306 multi sample blood collection needle 22g 307 multi sample blood collection needle 23g 308 multiparameter indicator – steam &eto conforms to en iso 11140 1, type 4 laminated – short 101 mm unlaminated – long 195 mm clear color change from – white to black ( steam ) clear color change from – yellow to brown ( eto ) assurance to the user that minimum cycle parameters have been achieved inside the pack can be used as a permanent record cost effective 309 n 95 mask 310 nasal canula standard tip 311 nasal cpap prong set infants ( hudsons ) , must have soft silicon, anatomically curved cannula, to enhance fit. luer fitting on expiratory connector to allow proximal airway pressure monitoring along with cap for fixation, inspiratory & expiratory elbow connector. must beus fda / europian ce approved. size 0 to 5 / 10fr to 20fr 312 nasopharyngeal ventilation tube double lumen in silicon material fr 8, 10, 12 313 nasal prongs ( adult ) 314 nasal prongs ( child ) 315 nasal prongs ( neonates ) 316 neck line 2 lumen 3fr xro+ pur ) 10cm, 15cm, 20cm / 3 fr ( 22g / 22g ) in seldinger technique with stright. us fda / ce approved 317 neck line 2lumen xro+ pur8cm, 12.5cm / 5.5 fr in seldinger technique with kink resistant j guidewire us fda / ce approved 318 neck line 3 lumen4.5 fr xro+ pur 6cm , 12.5cm / 4.5 fr ( 20 / 20 / 23g ) in seldinger technique with stright guidewire us fda / ce approved 319 neck line 3 lumen 4.5fr xro+ pur 6cm , 8cm, 10cm, 12.5cm ( 20 / 20 / 23g in seldinger technique with kink resistant. j guidewire us fda / ce approved 320 neck line 3 lumen 5.5frxro+ pur8cm, 12.5cm ( 19 / 21 / 21g ) fr in seldinger technique withkink resistant j guidewire. us fda / ce approved 321 urimeter with sample port should have us fda / ce approved 322 needle free connector with dual extention 323 needle free connector with single extension 324 needle free connector with triple extension 325 needle no. 22 326 neonatal dual heated wire breathing system withsuction port in y piecewith 0.3m incubator extension with .15m limb and detachable pressure line with autofill humidification chamber with spare connectors . sterile pack andus fda / europian ce approved. should be compatible with every humidifier 327 neonatal high flow nasal cannula having8 litre flow. should have soft tip . 328 neonatal single heated wire breathing systemwith autofill humidification chamber in sterile pack andus fda / europian ce approved. should be compatible every humidifier. 329 neonatal single patient use resuscitator bag with mask size 1, 3.0m oxygen line and 600ml oxygen reservoir bag volume, 280ml resuscitator bag volume, should provide 100 ml stroke volume. should be usus fda / europian ce approved. 330 nitrile gloves all sizes 331 octenidine based wash lotion with neutral ph, tested as per european norms containing octenidine hcl, aqua, cocamidopropylamine oxide, peg 7 glyceryl cocoate, glycerin, hydroxyethyl cellulose, lactic acid, contains allantoin for full body wash head to toe 150 ml 332 octenidine based wash mitts with pratical hand dimension, tested as per european norms containing octenidine hcl, aqua, glycerine, cocamidopropylamine oxide, sodium lactate, allantoin, ethylhexyl glycerine 333 optical trochars 5mm 334 ot hand scrub povidine iodine 5% 335 ot icd tray sterilised ot drain tray with trocar drain and dual suction hemlich valveand other component 336 oxidized regenerated cellulose based topical absorbable hemostat, lightweight fibrillar / layer form, proven bactericidal property & efficacy and fully absorbable in 1 2 weeks, fibril material ( 7layers ) for broad surface area coverage. us fda / ce approved size 2x4 inch 337 oxidized regenerated cellulose based topical absorbable hemostat, lightweight fibrillar / layer form, proven bactericidal property & efficacy and fully absorbable in 1 2 weeks, fibril material ( 7layers ) for broad surface area coverage. us fda / ce approved size 4x4 inch 338 oxidized regenerated cellulose based topical absorbable hemostat, lightweight fibrillar / layer form, with proven bactericidal property & efficacy and fully absorbable in 1 2 weeks, fibril material ( 7layers ) for broad surface area coverage.us fda / ce approved size 1x2 inch 339 oxidized regenerated cellulose based topical absorbable hemostat, structured non woven material, with bactericidal property. documented fast hemostatis.ease of use in both open and minimally invasive procedures. can be repositioned easily without sticking to instruments, approved by us fda size 1x2 inches 340 oxidized regenerated cellulose based topical absorbable hemostat, structured non woven material, with bactericidal property. ease of use in both open and minimally invasive procedures. can be repositioned easily without sticking to instruments, approved by us fda size 2x4 inch 341 oxidized regenerated cellulose based topical absorbable hemostat, structured non woven material, with bactericidal property. ease of use in both open and minimally invasive procedures. can be repositioned easily without sticking to instruments, us fda / ce approved size 4x4 inch 342 oxidized regenerated cellulose based topical absorbable hemostatic powder for endoscopic application pack size 3 gm 343 oxygen mask with variable venturi system to ensure accurate concentration of oxygen 344 oxygen tube 25 meters 345 p.d. catheter set adult with open tip and lateral eyes supplied with stainless steel trochar, blunt type with clip 346 p.d. catheter set child with open tip and lateral eyes supplied with stainless steel trochar, blunt type with clip 347 p.d. catheter set infant with open tip and lateral eyes supplied with stainless steel trochar, blunt type with clip 348 ureteral stent size 2.8, 3, 3.5 &4 both end open 349 p.d. transfusion set 350 p.t. vial with label & chemical 351 pediatric spinal needle no. 18, 19, 20, 22, 23, 25, 27 352 neonatal urine collection bag with self adhesive facility 353 paediatric blood bag 100ml 354 paediatric single patient use resuscitator bag with mask size 3, 3.0m oxygen line and 2500ml oxygen reservoir bag volume, 550ml resuscitator bag volume, should provide 350 ml stroke volume. should be us fda / ce approved. 355 paediatric universal heated wire breathing system withdetachable inspiratory and expiratory temperature ports with autofill humidification chamberwith dual heated wire system ininspiratory limb and in expiratory in sterile pack and us fda / ce approved. should be compatible with every humidifier 356 paraffin gauze tulle dressing 10 cm x 10 cm 357 part b ( bibag 5008 ) 650 gm 358 patient identity band size pediatric and neonate 359 patient pre operative skin preparation solution 10 ml in one step sterile applicator container for single use with 2% chlorhexidine gluconate ( chg ) and 70% isopropyl alcohol ( ipa ) with orange tint color for easy visualization, us fda approved 360 patient pre operative skin preparation solution 26 ml in one step sterile applicator container for single use with 2% chlorhexidine gluconate ( chg ) and 70% isopropyl alcohol ( ipa ) with orange tint color for easy visualization, us fda approved 361 pe40 bar anti uv line for infusion of photo sensitive drugs 1mm internal diameter length 100 / 150 / 200 cm us fda / ce approved 362 pe 10cm extension tube40bar male to female vein o line. us fda / ce approved 363 pe coilled extension line for fluid infusion, fda approved 1mm internal diameterlength 100 / 200 / 150cm us fda / ce approved 364 pe xro pural drain catheterin 6fr with 30cm , 8fr with40cm , 8fr with 50cm anf 10fr with 50cm place by needleintroducer covered with handling sleeve and a 3 way stopcock with conical adapter 365 pe, pressure capacity 40 bar, male to female, venous infusion andpressure monitringline, fda approvedlength with 1mm internal diameter 50 / 100 / 150 / 200 / 10cm us fda / ce approved 366 pediatric caudal needle caudal needle with crawford tip 45 deg with graduations & depth stop size 23 gx 25mm, 22 g x 40 mm 367 pediatric epidural anaeshtesia set touhy cannula with stainless steely stylet & detachable wings. catheter with 1 cm graduation upto 20 cm & radiographic contrast strip made up of kink resistant rugged nylon material with close tip & 2 laterial eyes. complete with : 0.2 um flat filter tuohy borst adapter 10ml lor syringe x ray contrast catheter guide canula size: 19gx45mm catheter size : 23gx45cm 368 percetaneous introducer kits, standard length with double ended wire. size: 5 fr. 11cm / 6fr. 11cm / 7fr. 11cm should be usfda approved 369 percetaneous introducer kits, standard length without wire . size: 5 fr. 11cm / 6fr. 11cm / 7fr. 11cm should be usfda approved 370 percutaneous nephrostomy tube 12fr 371 percutaneous nephrostomy tube 14 f 372 percutaneous nephrostomy tube 16 f 373 percutaneous nephrostomy tube 18 f 374 percutaneous nephrostomy tube 20 f 375 photosensitive extension line 150cm 376 photosensitive pm line should be sterile, pyrogen free should be non toxic latex free ce mark length 150 cm 377 picc silicone picc single lumen catheter size : 2.8fr. 50cm should be usfda approved 378 pigtail cath. with mettalic trocar 10 f 379 pigtail cath. silicon 14 f 380 pigtail cath. silicon 16 f 381 pigtail cathetersilicone 26 f 382 pigtail catheter silicone 20 f 383 pigtail catheter silicone 22 f 384 pigtail catheter silicone 24 f 385 plain red rubber catheter no. 6, 8, 10, 12 386 plasma filter size 0.03 m2 387 plasma filter size 0.06 m2 388 plastic test tube 3” with screw cap with label 389 poly propylene 2 0 841 390 poly urethane umblical catheter supplied with stop cock & identification clip with cm marking & transparent hub size 4, 5, & 8 fr 391 polyurathane long canula with ptfe material with flowswitch, pre puncyure stylus and stabilizing wings. size: 16g, 13cm / 16cm / 18g, 9cm. should be ce / usfda approved 392 polyurethene catheter clear extensions and pinch clamps, cannula introducer, steel needle introducer, vessel dilator, vena guide seldinger wire advancing device with nitinol guidewire, 5ml guiging syringe, luer lock plugs and secondary fixation devices. size 7fr. lrngth 15cm / 20cm. should be ce / usfda approved. 393 polyurethene catheter clear extensions and pinch clamps, cannula introducer, steel needle introducer, vessel dilator, vena guide seldinger wire advancing device with nitinol guidewire, 5ml syringe, luer lock plugs and secondary fixation devices. size 22g 6cm / 10cm / 20cm. should be ce / usfda approved. 394 pre and post surgical skin antisepsis available iodine 1% w / v in an aqueous < 5 sodium iodide, < 1 surfactant base, < 88 water500 ml shelf life of 5 years 395 premature soft tip nasal cannula having soft tip nasal cannula with tubing. 396 pressure monitoringline 200cm / 150cm / 100cm 397 pulmonary artery catheters for monitoring right heart pressure and cardiac output measurement. size: 7fr, 110cm 5lumen with one piece introducer kit 8fr. 11cm 398 pur locked anti reflex valve with silicon duff and 10 cm 3 lumen extension tubing with coloured coding for tripleinfussion on cannula us fda / ce approved 399 pur locked anti reflex valve with silocon duff and 10 cm extension tubing with coloured coding for multiple infussion on cannula us fda / ce approved 400 purcatheterxro 30cm , 2.5g and 40cm with 3.5, 4, 5, 8, fr compatible to both venous and arterial routes with fenale luerlock , supplied with stopcock. us fda / ce approved dehp free 401 purpaediatric epidural anaesthesia catheter with 22g in 40 cm supplied with 19g / 50mm directional tuohy bevel us fda / ce approved 402 purtransparent, semi permiable, stretchable , hypoallergic sterile incision drape or dressing for protecting catheter introduction sites … ( permiable to water vapur and oxygene ) , 300% strechable, fda approved sizes 15cm x 20cm, 33cm x 30cm, 33cm x 45cm, 48cm x 45cm, 48cm x 60cm, 48cm x 90cm, 56cm x 90cm. 8*6 cm and 15*10cm 403 purxrocatheterwith 4, 6, 8, 12 cm by 20g on seldinger techniquewith female luer lock . arrowed needle with securing wings. flowrate 30 / 27 / 24 / 20 ml / minus fda approved 404 purxrocatheter 20cm / 15cm with 2fr on seldinger technique ( flow rate 4.4 ml / min ) with integral ext.tube of 4.5cm with female luer lockand securing wings us fda / ce approved 405 purxrocatheter 4cm with 2fr on seldinger technique ( flow rate 17 ml / min ) with integral ext.tube of 4.5cm with female luer lockand securing wings us fda / ce approved 406 purxrocatheter 6cm with 2fr on seldinger technique ( flow rate15 ml / min ) with integral ext.tube of 4.5cm with female luer lockand securing wing us fda / ce approved 407 pur catheter with stylet & extension tube every 5 cm marking comes with peel apart introducer & messuring tep size 3fr with 60cm length 408 pur hd catheter kit double lumen 6.5fr 11cm with 7fr x 10cm dilator 409 pur hd catheter kit double lumen 8.5fr 11cm with 9fr x 10cm dilator 410 pur locked anti reflex octopus double lumen 411 pur locked anti reflex valve with silocon duff and 10 cm extension tubing2 lumen with coloured coding for double infussion on cannula us fda / ce approved 412 pur xro catheter8cm with 2fr on seldinger technique ( flow rate 12 ml / min ) with integral ext.tube of 4.5cm with female luer lock and securing wings us fda / ce approved 413 pur xro catheter 20 cm 28 g 414 pur xro catheter 30cm 24g / 2fr 415 pur xro catheter 4cm with 2 fr 416 pur xro catheter with 6, 10 cm by 18g on seldinger techniquewith female luer lock , arrowed needle with securing wings flowrate 55 / 44ml / min. us fda / ce approved 417 pur xro double lumen umblical cath. no. 12 418 pur xro double lumer 3 fr seldinger cvc catheter with tafflon coated nitinol guide wire length 6, 8 & 10 cm 419 pur xro catheter 20 cm, 28g / 1fr picc line with stylet, splitting needle with securing wings with 8 cm extension tubing ( flow rate 1ml / min ) 420 pur xro catheter 30 cm, 24g / 2fr picc line with split cannula and 10cm extension tubing over catheter ( flow rate 0.2ml / min ) 421 pur xro midd line catheter comes with introducer needle and national guidewire 3, 4 fr with 4, 6, 8, 10, 15, 20 cm 422 pvccatheterxro 40 cm, 3.5, 4, 5, 6, 7, 8 fr compatible to venous and arterial routes with fenale luerlock dehp free us fda / ce approved 423 pvcet with secondary lumen forairway mang. +surfactant administration size 2, 2.5, 3, 3.5, 4, 4.5, with 165cm and 230 cm. us fda / ce approved 424 pvc catheter xro 40cm 5fr 425 pvc intercostal drainage 8, 10, 12, 14, 16 with 8cm, 25cm, 15 cm with female lure lock 426 quad lumen polyurethene catheter 8.5fr ( 14g, 16g, 16g, 18g ) with c lear extensions and pinch clamps, cannula introducer, steel needle introducer, vessel dilator, vena guide seldinger wire advancing device with nitinol guidewire, 5ml syringe, luer lock plugs and secondary fixation devices with scalpal. size 5fr 15cm. should be ce / usfda approved. 427 radio opaque ptfe catheter 16g length 13 cm, ptfe material with flowswitch 428 radio opaque ptfe catheter 16g length 16 cm, ptfe material with flowswitch 429 radio opaque ptfe catheter 16g length 20 cm, ptfe material with guidewire 0.9 x 500mm introducers 1.7cm x 70mm 1.4 x 70mm 430 radio opaque ptfe catheter 20g ( 2.7fr ) length 76mm polyetyienecather, one introducer needle, one straight guidewire 431 ram cannula for use with low / high flow oxygen should be able to deliver peep of 5cm h2o upto 8cm h2o 432 ramp of colour coded individual port controller , lipid resistant, on neutral displacement for exchange transfussion us fda / ce approved 433 rapid cleaning and disinfection wipes impregnated with hydrogen peroxide should passes en 13727, en 13624 in 1 minute 1.4 % w / vof hydrogen peroxide and 0.01% w / v of silver nitrate size 20cm*20cm 434 rebreathing rubber bag 1 ltr. 435 rebreathing rubber bag 1½ ltr. 436 red rubber catheter no. 10 437 red rubber catheter no. 12 438 red rubber catheter no. 8 439 red rubber catheter no. 6 440 skin marker 15 cm 441 resuscitation circuit with peep is indicated as an accessory o add positive and expiratory pressure breathing capability to a manual resuscitator. 442 reusable anaesthetia face mask made ofsilicone autoclavable & pure transparent. us fda / ce approved and size should be mentioned on mask. 443 reusable hand instrument interchangeable tips 444 reusable lap hand instrument handle 445 reusable / disposable foreign body removal forcep for gastro scope ( rat tooth forceps ) 446 romavac negative suction set no. 10 447 romavac negative suction set no. 14 448 romavac negative suction set no. 16 449 ryles tube no. 10, 12, 14, 450 safety box as per who standard 10 ltr 451 safety box as per who standard 5 ltr 452 safety iv canula with extension line close system no. 18 to 22 453 safety iv canula with extension line close system no. 24 454 safety iv canula with extension line close system no. 26 455 scalp vein set no. 18 to 27 456 scrub povidone iodine 7.5% 100 ml 457 scrub povidone iodine 7.5% 50ml 458 self adherent moist wound dressing made up to triple hydrocollid elastomeric polymer matrix 10cmx10cm 459 silicone face mask 22 mm inside cone 0to 3 size 460 single lumen certon material catheter with v needle kink free nitinol guide wire 3 fr 15 cm. 461 single lumen set with extension. polyurethene catheter clear extensions and pinch clamps, cannula introducer, steel needle introducer, vessel dilator, vena guide seldinger wire advancing device with nitinol guidewire, 5ml syringe, luer lock plugs and secondary fixation devices. size 4fr. 60cm. should be ce / usfda approved. 462 single lumen set with extension. polyurethene catheter clear extensions and pinch clamps, cannula introducer, steel needle introducer, vessel dilator, vena guide seldinger wire advancing device with nitinol guidewire, 5ml syringe, luer lock plugs and secondary fixation devices. size 2.5fr. 100cm. should be ce / usfda approved. 463 single piece little one ostomy appliance having triple hydrocolloid skin barriercomprising of elastomeric polymers with flexible tape collar integrated wth opaque drianable pouch 12 ( inches ) and one sided comfort panel 464 skin friendly hydrocolloid base umbilical catheter holder 465 skin paint povidone iodine 10% 100 ml 466 skin paint povidone iodine 10% 50 ml 467 skin paint povidone iodine 10% 500 ml 468 skin stapler 469 smart read biological indicator for steam : smart read self contained biological indicator ( scbi ) eztest®️ ( steam ) contains a known quantity 105 of geobacilus stearothermophilus, 7953, bacterial spores inoculated onto lter paper and placed inside a plastic culture tube with a crushable inner glass ampoule containing the culture medium. should be available for steam processes at 121°c, 132°c, 134°c and 135°c. a process indicator on the label changes color from blue to black when sterilization done . failed sterilization cycles may be detected in 3 5 hours. the scbi is convenient to culture. 470 smart read incubator : the incubator should have 10 wells for placement of exposed biological indicator vials. it should have one well for non exposed positive control and one well for placement of the thermometer. the smart well incubator is preset to 60° + / 2° c for optimum incubation of bis the incubator should be connected to a printer via cable with a separate power switch in the printer the incubator should have an activation cavity to crush the ampoule results should be automatically printed once they are available the test completion / positive result should be indicated by an alarm operated by touch screen with option for settings option to search and retrieve old results option to set date, time , lot no and operator name in software 471 socks for term and preterm newborns 472 soda lime 5 kg should be ce / usfda approved. 473 sodium bicarbonate powder 820gm ( part b ) 474 sodium hypoclhorite 6% 5 liters 475 sodiumdi chloroi socyanurate effervesent tablets 500 mg 476 soft peritoneal dialysis catheter set pead with kit singal cuff. should contain catheter and standard accessories andcatheter should be radio opaque catheter should be us fda approved or ce ( certificate must be enclosed ) . 477 hfnc mask should have us fda / ce approved 478 holder et tube adult should have us fda / ce approved 479 spiral high pressure monitoring line 480 sporicidal concentrate for surface disinfection containing: hydrogen peroxide 22.0% peracetic acid 4.5% inert ingredients 73.5% 481 standard pf gamma sterile low protein latex powder free surgical gloves with synthetic polymer coating in accordance with en455 3 and iso 21171 all sizes. 482 stapler remover 483 steam chemical integratorwith an extender strip affixed that is a 17.8 cm ( 7 in ) long by 1.8 cm ( 0.7 in ) wide rigid strip that serves as a handle to retrieve processed integrators from inner packs. • should have 510 ( k ) registration • should have a bsi kitemark certificate 484 sterile disposable hypodermic needle no. 18x1½ 485 sterile disposable hypodermic needle no. 21x1½ 486 sterile disposable hypodermic needle no. 23x1½ 487 sterile disposable hypodermic needle no. 26x1 488 sterile gauze swab 10x10x8 bleached with hydrogen peroxide and demineralised water, inside folding of gauze to avoid loose threads with 100% cotton 489 sterile laprotomy padwith all four edge sealed, 100% cotton, bleached by hydrogen peroxide and de mineralised water tape & x ray detectable thread size 25cm x 25cm 8ply 490 sterile laprotomy padwith all four edge sealed, 100% cotton, bleached by hydrogen peroxide and de mineralised water tape & x ray detectable thread size 30 x 30 cm 8ply 491 sterile sample container 30ml 492 sterile single use disposable laryngoscope miller blades. pack should consist of a handle with fitted batteries, led lightsource and fibreoptic metal miller blades both in one packfor single patient use. sizes 00, 0, 1 493 sterile single use syringe 0.1 ml with natural rubber gasket & auto disable mechanism 494 sterile single use syringe 0.5 ml with natural rubber gasket & auto disable mechanism 495 sterile single use syringe 1 ml with natural rubber gasket & auto disable mechanism 496 sterile single use syringe 10cc with natural rubber gasket & auto disable mechanism 497 sterile single use syringe 10cc with natural rubber gasket , central nozzle & luer lock. 498 sterile single use syringe 10cc with natural rubber gasket , central nozzle & luer mount. 499 sterile single use syringe 1cc with natural rubber gasket , central nozzle & luer lock. 500 sterile single use syringe 1cc with natural rubber gasket , central nozzle & luer mount. 501 sterile single use syringe 20cc with natural rubber gasket & auto disable mechanism 502 sterile single use syringe 20cc with natural rubber gasket , central nozzle & luer lock. 503 sterile single use syringe 20cc with natural rubber gasket , central nozzle & luer mount. 504 sterile single use syringe 2cc with natural rubber gasket & auto disable mechanism 505 sterile single use syringe 2cc with natural rubber gasket , central nozzle & luer lock. 506 sterile single use syringe 2cc with natural rubber gasket , central nozzle & luer mount. 507 sterile single use syringe 3cc with natural rubber gasket & auto disable mechanism 508 sterile single use syringe 3cc with natural rubber gasket , central nozzle & luer lock. 509 sterile single use syringe 3cc with natural rubber gasket , central nozzle & luer mount. 510 sterile single use syringe 50cc with natural rubber gasket , central nozzle & luer lock. 511 sterile single use syringe 50cc with natural rubber gasket , central nozzle & luer mount. 512 sterile single use syringe 5cc with natural rubber gasket & auto disable mechanism 513 sterile single use syringe 5cc with natural rubber gasket , central nozzle & luer lock. 514 sterile single use syringe 5cc with natural rubber gasket , central nozzle & luer mount. 515 suction catheter neonatal should have ce andus fda / europian ce approved 516 suction bulb 517 suction catheter no. 6, 8, 10, 12 518 suction cannula with tube with standard tip 519 super rapidattest biological indicator for steam. • it should be positive and negative bi read out time within 10 to 15 minute by an audible alarm in super rapid auto reader. • it should be two years self life. • should have fda clearance. • designed and certified as per iso 11138 and en 866. 520 suprapubic catheter 14 f 521 suprapubic catheter 16 f 522 suprapubic catheter 18 f 523 suprapubic catheter 20 f 524 suprapubic catheter no. 10, 12, 14, 16 525 surfactant delivery tube to avoid magil forceps comes in 6fr, 20cm length with 0.2ml dad space & 2 cm black blunt ultra soft tip with cm marking 526 surgical scrub brush spog in 20%chlorhexidine in 15 ml sol of isopropyl alcohol and water with nail cleaner 527 surgical scrub brush with sponde impregnated with 12% poverdine iodine in 15ml sol of teepol with nail cleaner 528 surgical spirit 100ml 529 surgical spirit 500ml 530 paladai spoon ( suthi ) for feeding of newborns, made of stainless steel 531 suture 2 0 rb½ circle 30 mm 90 cm2317 532 suture 2 0 rb ½ circle 30 mm 76 cm 4241 533 suture 1 0 rc 3 / 8 circle 45 mm 76 cm 5037 534 suture 1 0 tc ½ circle 40 mm 100 cm4279 535 suture 1 0 tc ob ½ circle 36 mm 90 cm 2517 536 suture 2 0 rb ½ circle 30 mm 70 cm841 537 suture 2 0 rb ½ circle 30 mm 76 cm 5333 538 suture 2 0 rb ½ circle 30 mm 90 cm 5331 539 suture 2 0 rb ½ circle 30 mm 90 cm 844 540 suture 2 0 rc ½ circle 30 mm 152 cm4277 541 suture 2 0 rc ½ circle 40 mm 90 cm 2382 542 suture 2 0 rc 3 / 8 circle 45 mm 76 cm 5036 543 suture 2 0 tc ½ circle 25 mm 70 cm 807 544 suture 3 0 cc 3 / 8 circle 16 mm 70 cm 3321 545 suture 3 0 cc 3 / 8 circle 16 mm 76 cm 5002 546 suture 3 0 cc 3 / 8 circle 16 mm 90 cm 5003 547 suture 3 0 cc 3 / 8 circle 22 mm 45 cm 2401 548 suture 3 0 cc 3 / 8 circle 22 mm 70 cm 018 549 suture 3 0 cc 3 / 8 circle 22 mm 76 cm 4201 550 suture 3 0 cc 3 / 8 circle 22 mm 90 cm 800 551 suture 3 0 cc 3 / 8 circle 25 mm 70 cm1326 552 suture 3 0 rb ½ circle 20 mm 70 cm 2437 553 suture 3 0 rb ½ circle 20 mm 70 cm 887 554 suture 3 0 rb ½ circle 20 mm 76 cm5087 555 suture 3 0 rb ½ circle 20 mm 76 cm 4237 556 suture 3 0 rb ½ circle 25 mm 90 cm 5085 557 suture 3 0 rc 3 / 8 circle 26 mm 70 cm 3326 558 suture 3 0 rc 3 / 8 circle 26 mm 76 cm 5028 559 suture 4 0 cc 3 / 8 cc 16 mm 90 cm 3319 560 suture 4 0 cc 3 / 8 circle 16 mm 70 cm870 561 suture 4 0 cc 3 / 8 circle 16 mm 76 cm4280 562 suture 4 0 cc 3 / 8 circle 16 mm 76 cm 5001 563 suture 4 0 cc 3 / 8 circle 16 mm 90 cm 5000 564 suture 4 0 cc 5 / 8 circle 16 mm 45 cm 2465 565 suture 4 0 rb ½ circle 16 mm76 cm 5049 566 suture 4 0 rb ½ circle 16 mm90 cm 5050 567 suture 4 0 rb ½ circle 16 mm 70 cm 849 568 suture 4 0 rb ½ circle 20 mm70 cm2304 569 suture 4 0 rb ½ circle 20 mm70 cm 2304 570 suture 4 0 rb 3 / 8 circle 16 mm 70 cm 1648 571 suture 4 0 rb 3 / 8 circle 16 mm 76 cm 5048 572 suture 4 0 rc 3 / 8 circle 16 mm 70 cm 1205 573 suture 5 0 cc 3 / 8 circle 16 mm 45 cm 2442 574 suture 5 0 rb 3 / 8 circle 16 mm76 cm 5081 575 suture 5 0 rb 3 / 8 circle 16 mm 70 cm 881 576 suture 5 0 rb 3 / 8 circle 16 mm 76 cm 4281 577 suture 5 0 rb oval ½ circle 16 mm45 cm 2303 578 suture 5 0 rc 3 / 8 circle 12 mm 76 cm 5079 579 suture 5 0 rc 3 / 8 circle 12 mm 76 cm 5080 580 suture 5 0 rc 3 / 8 circle 12 mm 90 cm 889 581 suture 5 0 tc 5 / 8 circle 10 mm 30 cm 4263 582 suture 6 bands multi band ligator 583 suture 6 0 cc 3 / 8 circle 13 mm 70 cm 3351 584 suture 6 0 micro point ¼ circle 8 mm 45 cm 2670 585 suture 6 0 rb 3 / 8 circle 13 mm 75 cm 829 586 suture 6 0 rc mp 3 / 8 circle 8 mm 4240 587 suture 6 0 rc mp 3 / 8 circle 8 mm 5043 588 suture pga 2 0 rb 2341 589 suture pga 3 0 rb 2437 590 suture pga 4 0rb 2304 591 suture pga 5 0 rb 2303 592 suture pga 5 0 rc 2442 593 suture pga 6 0 2670 594 suture polydioxanone 6 0 rb 595 suture polydioxanone 4 0 rb 596 suture polydioxanone 3 0 rb 597 suture polydioxanone 5 0 598 suture polypropylene 2 0 807 599 suture polypropylene 3 0 cc 600 suture polypropylene 3 0 rb 601 suture polypropylene 4 0 849 602 suture polypropylene 4 0cc 870 603 suture polypropylene 5 0 rb 881 604 suture polypropylene 6 0 605 suture polyprylene 3 0 cc 018 606 suture prolene 5 0 rc 607 suture silk 2 0 5331 608 suture silk 2 0 rc 5036 609 suture silk 3 0 rb 5087 610 suture silk 4 0 5001 611 suture silk 4 0 rb, 5049 612 suture silk 5 0 5081 613 suture silk 5 0 rc 5080 614 suture silk 5 0rb 3 / 8circle 16mm 75cm 5081 615 suture 2 0 rb ½ circle 30 mm 70 cm 2341 616 suture 2 0 oval rb jb ½ circle 26 mm 70 cm 1665 617 tail closure with insert 618 temparature management thrmocromic color coded patch for instant check and constant monitoring. it should be water proof 619 tenckhoffdialysis catheter 37 cm / 31 cm ( capd ) should contain coiled catheter should be radio opaque catheter should be us fda / ce approved. ( both certificate must be enclosed ) . 620 test strips to test mec level of 0.55% orthothalaldehyde solution 621 test strips to test mec level of 2.45 % glutaraldehyde solution 622 testicular silicone implant 10cc 623 testicular silicone implant 15cc 624 testicular silicone implant 20cc 625 thermal paper for sonography machine 626 three way stop cock with extension line 10 cm 627 three way stop cock with extension line 100 cm 628 three way stop cock with extension line 50 cm 629 topical soln.povidone iodine5% 100 ml 630 topical soln.povidone iodine 5% 50ml 631 torniquet 632 t piece resuscitation circuit with manometer 1.5m length with universal connector & double swivel elbow 633 tracheostomy tube cuffed no. 2½, 3, 3½, 4, 4½, 5, 5½, 6, 6½, 7, 7½, 8 634 tracheostomy tube plain no. 2½, 3, 3½, 4, 4½, 5, 5½, 6, 6½, 7, 7½, 8 635 transducer filter for hemodialysis machine 636 transducer set length 180cm, flush / flow rate 3cc / hr should be ce / usfda approved. 637 transleucent foam dressings with protective barrier against water, bacteria and viruses, water proof or shower proof with perforated with gentle, skin friendly silicone adhesive, easy to apply & re position designed to absorb low exudate levels and helping maintain a moist wound healing environment 15x15cm 638 transleucent foam dressings with protective barrier against water, bacteria and viruses, water proof or shower proof with perforated with gentle, skin friendly silicone adhesive, easy to apply & re position designed to absorb low exudate levels and helping maintain a moist wound healing environment 10x20cm 639 transleucent foam dressings with protective barrier against water, bacteria and viruses, water proof or shower proof with perforated with gentle, skin friendly silicone adhesive, easy to apply & re position designed to absorb low exudate levels and helping maintain a moist wound healing environment 5.5cmx12cm 640 transparent dressing impregnated with chlorexidine gluconate gel patch for central line & pic line. size : 7 cm x 8.5 cm 641 transparent dressing with extra securing strips for canula & with non wowen cloth securement. 642 transparent film reinforced piv dressings with pattern coating of adhesive, unique paper window frame delivery design.size 3.8 cm x 4.5 cm. 643 transparent film reinforced piv dressings with pattern coating of adhesive, unique paper window frame delivery design.size 5 cm x 5.7 cm. 644 transparent i.v. paed. dressing 645 transparent i.v. paed. dressing with absorbent pad5 x 7 cm 646 transparent i.v. paed. dressing with absorbent pad6 x 10 cm 647 transparent surgical tape 3” x 9m 648 triple lumen polyurethene catheter 5fr ( 18g, 20g 20g ) with clear extensions and pinch clamps, cannula introducer, steel needle introducer, vessel dilator, vena guide seldinger wire advancing device with nitinol guidewire, 5ml syringe, luer lock plugs and secondary fixation devices. size 5fr 6cm / 10cm. should be ce / usfda approved. 649 triple lumen sets with guiding syring. polyurethene catheter clear extensions and pinch clamps, cannula introducer, steel needle introducer, vessel dilator, vena guide tm seldinger wire advancing device with nitinol guidewire, 5ml guiding syringe, luer lock plugs and secondary fixation devices. size 5fr, , 6cm / 10cm, 7fr. 15cm. should be ce / usfda approved. 650 triple lumen sets with guiding syringe. polyurethene catheter clear extensions and pinch clamps, cannula introducer, steel needle introducer, vessel dilator, vena guide tm seldinger wire advancing device with nitinol guidewire, 5ml guiding syringe, luer lock plugs and secondary fixation devices ( without floswitch ) . size7fr. 15cm. should be ce / usfda approved. 651 trocar drain 652 tube exchanging and oxygenating bougie 60cm with 40 degree angled device to treat 96% of difficult intubationwith oxygenation upto 15lt / min size 01 & 02 us fda / ce approved 653 ultrasound guided single shot tap block cannula canula should have special reflector surface for visibility under ultrasound and clearly visible for penetration marking in cm should be supplied iwht tubing for injecting anesthetic size : 22gx50mm, 22g x80 mm, 21g 1 110mm 654 umbilical cord clamp 655 umblical canula / catheter for newborn, radiopaque pvc catheter with graduated centimeter markings, latex and dehp free no. 2.5, 3.5, 4, 5, 6, 7, 8 656 umblical placement kit 657 under pad sheet 90x60 cm 658 ureteral catheter 659 urine bag paed. 660 urine collection bag with measured volume chamber 661 urine collection bag 2000 ml 662 v.p. shunt hp 663 v.p. shunt lp 664 v.p. shunt mp 665 vaccum blood collection tube esr 2 ml 666 vaccum blood collection tube coagulation 2 ml 667 vaccum blood collection tube edta 2 ml 668 vaccum blood collection tube serum 2 ml 669 vaccumed edta k2 tube with monocap 3ml 670 vaccumed edta k2 tube with monocap2ml 671 vaccumed edta k3 tube with monocap2ml 672 silicone bases medical adhesive remover spray. alcohol free no stingcan be sprayed from any direction skin. 360 degree spray to avoid waste 50 ml 673 skin gel wipes prevent irritation associated with removal of adhesives. 674 acts as a protective interface between skin and bodily wastes and fluids when used with adhesive products. in sachet form.alcohol free 675 self adhesiveone pc paediatric bag with diamond shape skin barrier to hold more weight. dimpled skin barrier for the skin to breath. af300 filter to release the gas and lock n roll mushroom technology closure system. adhesive 1 piece transparent stoma, bag pediatric 676 f ted feeding tube attachment device 677 colostomy skin conditioning cream, soothes irmtated dry skin improving tolerance to repeated tape and barrier use. contains aloe vit. a.d & e. 118ml. ( bottle ) 678 pidrainable pouch with skin barrier with integrated lock ‘n rolimicroseal closure & has af 300 filter to reduce the odour and balooning. cutting area upto 65 mm 679 vein o line 10 cm, 100 cm, 150 cm 680 venturi mask 681 winged infusion set no. 27 682 water proof pu based silicon adhesive tape size : 1.9cm x 1.5m 683 water proof pu based silicon adhesive tape size : 5cm x 5m 684 water proof pu based silicon adhesive tape size :2.5cm x 1.5m 685 waterless scrub with hand mosturizer chlorhexidine gluconate 1% w / w and ethyl alcohol 61% w / w supplied with atouch less delivery. 686 yaunkers suction set with standard tip 2.5 meters 687 triple lumen indwelling catheter with chlorhexidine and silver sulfadiazine, radiopaque polyurethane with blue flextip, raulerson spring wire introduction syringe, size 7fr x 16cm 688 peadtric cvc tripal luman with blue flex tip, tripal luman cvc 5.5. fr 8 cm 689 peadtric cvc tripal lumanwith blue flex tip, cvc set: 3 lumen 4fr x 8cm 690 peadtric femoral tripal luman cvc with blue flex tip, tripal luman 5.5 fr 30 cm with blue flex tip 691 seldinger arterial catheter red colour for artery , radioopaque indewelling pur catheter with matched needle / catheter gauge ratio, angled stabilization wings, integrated extension line and red color coding, hydrophilic coating, spring wire guide with exit markings and soft tip ends, size 18 / 20 guage x 5 / 8 / 12cm 692 disposable syringe 1 ml with separable needle of 26 g. transparent polypropylene barrel, polyethylene / polypropylene plunger and natural rubber gasket, eto sterilized. 693 polyurethane locked anti reflux valve with silicon duff and 10 cm extension tubing 2 lumen with colored coding for double infusion on cannula 694 pvc transparent with radiopaque line 1 lateral eye marking every centimeter, icd trocar size 8 fr with heimlich valve adapter 695 pvc transparent with radiopaque line 1 lateral eye marking every centimeter, icd trocar size 10 fr with heimlich valve adapter 696 pvc transparent with radiopaque line 1 lateral eye marking every centimeter, icd trocar size 14 fr with heimlich valve adapter 697 pvc transparent with radiopaque line 1 lateral eye marking every centimeter, icd trocar size 18 fr with heimlich valve adapter 698 ramp of 6 stopcocks for intravenous parenteral nutrition with lipid resistant body and different color coding, latex free and dehp free 699 pediatric peritoneal dialysis catheter ( tenckhoff ) for infants 25 cm 700 pediatric peritoneal dialysis catheter ( tenckhoff ) for pediatric patients 36 cm 701 pediatric peritoneal dialysis catheter ( tenckhoff ) for pediatric patients 40 cm 702 hypoallergenic transparent dressing with extra securing strips for fixation of cannula in infants and with non woven securement 703 oxygen non rebreathing mask pediatric 704 guedel’s airway size 0 705 guedel’s airway size 1 706 guedel’s airway size 2 707 guedel’s airway size 3 708 guedel’s airway size 4 709 ecg electrodes 710 diaper with velcro side ears for snuggly fit. size baby weight < 800 grams 711 diaper with velcro side ears for snuggly fit. size baby weight 800 1500 grams 712 diaper with velcro side ears for snuggly fit. size baby weight 1500 2500 grams 713 diaper with velcro side ears for snuggly fit. size baby weight 2500 4000 grams 714 diaper with velcro side ears for snuggly fit. size pediatric 715 diaper with velcro side ears for snuggly fit. size adult 716 requirement for thermo regulated anti bacterial anti viral anti fungal ot and icu blankets 717 rapid cleaning and disinfection wipes impregnated with hydrogen peroxide should passes en 13727, en 13624 in 1 minute 1.4% w / v of hydrogen peroxide and 0.01% w / v of silver nitrate size 20cm*20cm, 160wipes per box 718 five layered self adhesive absorbent dressing designed for exuding wounds, with soft silicone adhesive wound contact layer, with wound pad absorption layer made up of polyacrylate fibres & polyester fibres, wound pad acquisition layer made up of polyurethane foam & spreading layer made up of non woven viscose polyester, with polyurethane backing film as water, bacterial and viral barrier. a protective release liner made up of polyethylene film. product should be ce certified. usage wih flex cut technlogyupto 7 days. size 7.5x7.5 cm 719 five layered self adhesive absorbent dressing designed for exuding wounds, with soft silicone adhesive wound contact layer, with wound pad absorption layer made up of polyacrylate fibres & polyester fibres, wound pad acquisition layer made up of polyurethane foam & spreading layer made up of non woven viscose polyester, with polyurethane backing film as water, bacterial and viral barrier. a protective release liner made up of polyethylene film. product should be ce certified. usage wih flex cut technlogyupto 7 days. size 10x10 cm 720 five layered self adhesive absorbent dressing designed for exuding wounds, with soft silicone adhesive wound contact layer, with wound pad absorption layer made up of polyacrylate fibres & polyester fibres, wound pad acquisition layer made up of polyurethane foam & spreading layer made up of non woven viscose polyester, with polyurethane backing film as water, bacterial and viral barrier. a protective release liner made up of polyethylene film. product should be ce certified. usage wih flex cut technlogyupto 7 days. size 12.5x12.5 cm 721 self adhesive 4 layered absorbent surgical dressing with soft silicone adhesive wound contact layer designed for exuding wounds with wound pad absorption layer made up of polyacrylate fibres & polyester fibres, wound pad comes with flex cut techonology, wound pad acquisition & spreading layer made up of polyethylene / polypropylene fibres and with polyurethane backing film as water, bacterial and viral barrier. a protective release liner made up of polyethylene film. product should be ce certified. usage upto 7 days. size 10x20 cm 722 self adhesive 4 layered absorbent surgical dressing with soft silicone adhesive wound contact layer designed for exuding wounds with wound pad absorption layer made up of polyacrylate fibres & polyester fibres, wound pad comes with flex cut techonology, wound pad acquisition & spreading layer made up of polyethylene / polypropylene fibres and with polyurethane backing film as water, bacterial and viral barrier. a protective release liner made up of polyethylene film. product should be ce certified. usage upto 7 days. size 6x8 cm 723 self adhesive 4 layered absorbent surgical dressing with soft silicone adhesive wound contact layer designed for exuding wounds with wound pad absorption layer made up of polyacrylate fibres & polyester fibres, wound pad comes with flex cut techonology, wound pad acquisition & spreading layer made up of polyethylene / polypropylene fibres and with polyurethane backing film as water, bacterial and viral barrier. a protective release liner made up of polyethylene film. product should be ce certified. usage upto 7 days. size 9x10 cm 724 self adhesive 4 layered absorbent surgical dressing with soft silicone adhesive wound contact layer designed for exuding wounds with wound pad absorption layer made up of polyacrylate fibres & polyester fibres, wound pad comes with flex cut techonology, wound pad acquisition & spreading layer made up of polyethylene / polypropylene fibres and with polyurethane backing film as water, bacterial and viral barrier. a protective release liner made up of polyethylene film. product should be ce certified. usage upto 7 days. size 10x15 cm 725 three layered thin highly absorbent foam dressing with self adherent borders and with soft silicone wound contact layer, with wound pad absorption and spreading layer made up of viscose non woven polyester fibres, with wound pad acquisition layer made up of polyurethane foam, with polyurethane backing film as water, bacterial and viral barrier. a protective release liner made up of polyethylene film. product should be ce certified with fle cut technologyusage upto 7 days. size 5x12.5 cm 726 three layered thin highly absorbent foam dressing with self adherent borders and with soft silicone wound contact layer, with wound pad absorption and spreading layer made up of viscose non woven polyester fibres, with wound pad acquisition layer made up of polyurethane foam, with polyurethane backing film as water, bacterial and viral barrier. a protective release liner made up of polyethylene film. product should be ce certified with fle cut technologyusage upto 7 days. size 7.5x7.5 cm 727 three layered thin highly absorbent foam dressing with self adherent borders and with soft silicone wound contact layer, with wound pad absorption and spreading layer made up of viscose non woven polyester fibres, with wound pad acquisition layer made up of polyurethane foam, with polyurethane backing film as water, bacterial and viral barrier. a protective release liner made up of polyethylene film. product should be ce certified with fle cut technologyusage upto 7 days. size 10x10 cm 728 antimicrobial five layered highly absorbent foam dressing with activated carbon and sliver content 1.2mg / cm2, active release for 168hrs ( 7 days ) with self adherent borders and with soft silicone wound contact layer, with wound pad absorption layer made up of polyacrylate fibres & polyethylene / polyester fibres, with acquisition and spreading layer made up of polyurethane silver foam, with polyurethane backing film as water, bacterial and viral barrier. a protective release liner made up of polyethylene film. product should be ce certified. usage upto 7 days. size 7.5x7.5 cm 729 antimicrobial five layered highly absorbent foam dressing with activated carbon and sliver content 1.2mg / cm2, active release for 168hrs ( 7 days ) with self adherent borders and with soft silicone wound contact layer, with wound pad absorption layer made up of polyacrylate fibres & polyethylene / polyester fibres, with acquisition and spreading layer made up of polyurethane silver foam, with polyurethane backing film as water, bacterial and viral barrier. a protective release liner made up of polyethylene film. product should be ce certified. usage upto 7 days. size 10x10 cm 730 antimicrobial five layered highly absorbent foam dressing with activated carbon and sliver content 1.2mg / cm2, active release for 168hrs ( 7 days ) with self adherent borders and with soft silicone wound contact layer, with wound pad absorption layer made up of polyacrylate fibres & polyethylene / polyester fibres, with acquisition and spreading layer made up of polyurethane silver foam, with polyurethane backing film as water, bacterial and viral barrier. a protective release liner made up of polyethylene film. product should be ce certified. usage upto 7 days. size 10x20 cm 731 triple layered anti microbial absorbent foam dressing, with activated carbon and sliver content 1.2mg / cm2, active sustained release for 168hrs ( 7 days ) with polyurethane backing film as water, bacterial and viral barrier, with soft silicone wound contact layer, with wound pad made up of polyurethane silver foam and protective release liner made up of polyethylene film. product should be ce certified. usage upto 7 days. size 10x10 cm 732 triple layered anti microbial absorbent foam dressing, with activated carbon and sliver content 1.2mg / cm2, active sustained release for 168hrs ( 7 days ) with polyurethane backing film as water, bacterial and viral barrier, with soft silicone wound contact layer, with wound pad made up of polyurethane silver foam and protective release liner made up of polyethylene film. product should be ce certified. usage upto 7 days. size 12.5x12.5 cm 733 triple layered absorbent foam dressing with polyurethane backing film as water, bacterial and viral barrier, with soft silicone wound contact layer, with wound pad made up of polyurethane foam and protective release liner made up of polyethylene film. product should be ce certified. usage upto 7 days. size 10x10 cm 734 triple layered absorbent foam dressing with polyurethane backing film as water, bacterial and viral barrier, with soft silicone wound contact layer, with wound pad made up of polyurethane foam and protective release liner made up of polyethylene film. product should be ce certified. usage upto 7 days. size 12.5x12.5 cm 735 antimicrobial five layered highly absorbent foam dressing with activated carbon and sliver content 1.2mg / cm2, active release for 168hrs ( 7 days ) with self adherent borders and with soft silicone wound contact layer, with wound pad absorption layer made up of polyacrylate fibres & polyethylene / polyester fibres, with acquisition and spreading layer made up of polyurethane silver foam, with polyurethane backing film as water, bacterial and viral barrier. a protective release liner made up of polyethylene film. product should be ce certified. usage upto 7 days. size 10x25 cm 736 thin perforated& transparent film, with wound contact layer made up of soft silicone, with transferring layer made up of polyurethane film and protective release liner made up of polyethylene film. product should be ce certified. usage upto 14 days. size 5x7.5 cm 737 thin perforated& transparent film, with wound contact layer made up of soft silicone, with transferring layer made up of polyurethane film and protective release liner made up of polyethylene film. product should be ce certified. usage upto 14 days. size 7.5x10 cm 738 thin perforated& transparent film, with wound contact layer made up of soft silicone, with transferring layer made up of polyurethane film and protective release liner made up of polyethylene film. product should be ce certified. usage upto 14 days. size 10x18 cm 739 thin perforated& transparent film, with wound contact layer made up of soft silicone, with transferring layer made up of polyurethane film and protective release liner made up of polyethylene film. product should be ce certified. usage upto 14 days. size 17x25 cm 740 aerosol mask kit pediatric / adult, with high performing chamber designed to deliver a fine, dense mist at a particle size of 2.1 μm at all angles up to 90° to maximize placement allowing flexible medication delivery, easy seal, threaded, cap, 6 cc capacity, jet to stay in place. anti spill jar to prevent leakage with recommended flow rate of 8 lpm to be supplied with non kinking star lumen tubing with standard / universal / clear connect secure tubing connector for nebulization rate of >20 ml / min. us fda registered & if applicable 510k. must be us fda / bis / ce certified with icmed 13485 or iso13485 certification. 741 aerosolization mouthpiece & tee connector kit, with high performing chamber designed to deliver a fine, dense mist at a particle size of 2.1 μm at all angles up to 90° to maximize placement allowing flexible medication delivery, easy seal, threaded, cap, 6 cc capacity, jet to stay in place. anti spill jar to prevent leakage with recommended flow rate of 8 lpm to be supplied with non kinking star lumen tubing with standard / universal / clear connect secure tubing connector for nebulization rate of >20 ml / min. us fda registered & if applicable 510k. must be us fda / bis / ce certified with icmed 13485 or iso13485 certification. 742 dry pad for moisture management, 58.4x90cm, with breathable layer, super absorbent core, aqua shield film and air permeable back sheet, absorbency of 1800 2300gm, us fda / ce / bis compliant, iso13485 compliant...

North Western Railway - Rajasthan

39886181 auction sale of scrap u/s very rusty and corroded light melting material consisting of all type of very rusty and corroded material such as broken drums, boxes, tube light fittings, corroded gi sheets, corroded pan/bucket, released rusted tor rod, sign board, cut/open mouth paint drums & coal tar drums with residue if any, barrels, fan guard, corrugated sheet , mesh, corroded wagon sheet, carriage items, plate lerries, pcs. of angle, channel, corroded released rods, broken pcs. of pipe, wire, rope, cooler bodies, bicycle, lamps, filters, boxes & other rusty & corroded c & w and loco items & fabricated material of sorts & sizes with minor nf attachment if any. location: yard no. 10 near c and w gate...

Indian Army - Rajasthan

39847801 bids are invited for modifications gravity based roller conveyers for ammunition shifting , barrel lifting mechanism , small arms cleaning device , automatic portable hydraulic jack for b vehicle , portable air compressor cum air filling machine total quantity : 7...

Matexnet Private Limited - Rajasthan

39846388 auction sale of scrap, alluminium material, scrap; ms pipe , diff size,scrap; ms; structural & fab. steel, e waste, scrap,used/waste grease,, scrap,miscellaneous mechanical items(mt) scrap basket scrap, pvc carboy 20 25 ltr 160.00 each 18 1.00 n 1,000 2 scrap, hw, drum ms cp below 210 ltr (empty paint drum) 350 each 18 1.00 n 1,000 3 scrap, hw, drum ms cp above 210 ltr 12 each 18 1.00 n 1,000 4 scrap, alluminium material 1945 kg 18 1.00 n 1,42,000 5 miscellaneous rubber scrap 9 mt 18 1.00 n 10,000 6 scrap; ms pipe, diff size (ash slurry line scrap pipes) 116 mt 18 1.00 n 2,23,000 7 scrap; ms; structural & fab. steel 44 mt 18 1.00 n 83,000 8 gi scrap, misc 2.55 mt 18 1.00 n 10,000 9 scrap, miscellaneous mechanical items(mt) scrap basket 105 mt 18 1.00 n 1,90,000 10 ms turning scrap 1 mt 18 1.00 n 10,000 11 scrap, lube oil; waste (used oil) with barrel 10.13 mt 18 1.00 y 26,000 12 e waste 1.60 mt 18 1.00 y 1,000 13 scrap, battery, lead acid 1000.00 kilogram 18 1.00 y 10,000 14 scrap, used/waste grease...

North Western Railway - Rajasthan

39823007 supply of copper tube terminal heavy duty long barrel size 120 sq mm, hole dia 12 mm similar to dowells cat. no. cus 287. [ warranty period: 30 months after the date of delivery ] => limited...

Indian Army - Rajasthan

39816321 bids are invited for combination plier , hand grider bosch , barrel pump , grease gun 5kg , jack 3.5 ton , allen key set , t spanner 8 9 and 10 mm , t spanner 11 12 13 and 14mm , socket set half inch , socker set 0.25 inch , screw driver 928 no , tweezer , circlip plier 175mm , circlip plier 215mm , grinding machine , pipe wrench , impact screw driver total quantity : 34...

Police Department - Rajasthan

39801319 tender for supply of shooting items for the preparation of talented players and ms. harshika singhs shooting competition. air rifile walther, centra duovario for walther fwb, diabolo green pellers for rifle, diabolo r10 pellets, target paper for rifle, rifle kit, cheek / piece rods, extension barrel tube for strice, aprechar for front singht with black inner circle, roll for tacus 10 est....

Rajasthan State Cooperative Consumer Federation Limited - Rajasthan

39760774 supply of orthopedic implants , lcp anterier superiorclavicle plate 3 5 , lcp anterier superiorclavicle plate 6 8 , lcp hook clavicleplate 3 6 , lcp periarticular humerour plate 3 8 , lcp philos plate 3 5 , lcp philos plate 6 10 , lcp extra articular humerous plate 4 6 , lcp extra articular humerous plate 8 10 , lcp middelhumerous plate with screw 4 8 , lcp lateral humerous plate with support plate with screw 4 8 , lcp lateralhumerous plate withoutsupport with screw 4 8 , i / l humerous nail all size , lcp oleceron plate 4 10 , lcp recon plate5 10 hole , lcp recon plate 11 16 hole , lcp narrowa plate 6 12 , narrowa plate 5 11 , locking dcp plate5 7 hole , locking dcp plate8 12 hole , locking dcp plate5 7 hole , locking dcp plate8 12 hole , sf / dcp plate 5 7 hole , sf / dcp plate 8 12 hole , one third tubular plate 4 7 hole , one third tubular plate 8 10 hole , lcp one thire tubular plate 5 10 , radius / ulna nail all sizes , 4 mm cc screws all sizes , lcp distal radius plate 3 6 hole , lcp oblique plate 3 6 hole , lcp volar plate 3 6 hole , i / l locking bolt 3.4 mm , cortical 3.5 mm screws , locking cortical3.5 mm screws , locking cancellous3.5 mm screws , locking 2.7 mm screws , cortical 2.4 mm screws , locking 2.4 mm screws , 4.5 mm cortical screw , 5 mm lockingcortical screw , 4 mm lock cansollous screw , 4 mm lock cortical screw , biplolar with cement , bipolar without cement , short pfn nail , longpfn nail , dhs 135* long barrel plate , lcp dhs* long barrel , dcs 95* plate , i / l femur nail , lcp distal femoral plate 5 10 hole , lcp distal femoral plate 11 14 hole , lcp proximal femoral plate 6 12 hole , i / ltibia nail , i / l expect tibia nail , lcp proximal tibial plate 4 8 hole , lcp proximal tibial plate 9 12 hole , lcp distal tibial plate 4 6 hole , lcp distal tibial plate 7 10 hole , lcp broad dcp plate 6 8 hole , lcp broad dcp plate 9 12 hole , broad dcp plate6 8 hole , broad dcp plate9 12 hole , lcp anerolateral tibial plate 4 10 hole , rush nail sizes , lcp calcaneum plate with screw , tens nail all sizes , c.c. 6.5 screws all sizes , supra condylar nail , lcp buttress palte4 7 hole , lcp buttress plate 8 10 hole , lcp posterier medial tibial plate 2 8 hole , raft plate 4 10 hole , lcp distal fibula plate 3 8 hole , malleolar screw all sizes , externalfixator ( one clamp ) 11 mm , externalfixatortubler rod all size11 mm , schanz pin all sizes , steminin pin all size , tube to tube clamp , hybridfixator , mono rail fixator , dhs leg screw all size , i / l locking bolt 4.9 mm , 6.2 / 6.4 / 6.5 mm bolt pfn , 8.0 mm bolt pfn , locking cansollous 5.00 mm all size , locking cansollous 6.5 mm all size , mono axail screw all size , poly axail screw all size , pedical rod all size , stappler , connector , modular bipolar without ( titsnium stem & hacoated , modular bipolar bipolar with cement , thr hybrid , thr ceremic on poly , thr cemented , thr metal on poly , tkr metal back , tkr with vitamin e poly , tkr titaniumwith layers , tkrwith highflex , armor coat tkr with vitamin e poly , endo button / rope , bioscrew , one button cl loop size 15mm 40 mm sterile , spiked washer for 4 mm 6.5 mm , tibial post fixation screw dia 6.5 mm len 30 mm , stayfix spiked lifament staple sizesmall &long , suturefix tibial base plate round hole ti sterile , softfix interference scres dia 7.0 mm len 30 mm ti st. , shaver blade strile , softfix interference scres dia 7.30 mm ti strile , mini vim suture anchor dia 2.8 mm ti , mini vim 11 suture anchor dia 3.5 mm ti , super vim suture anchor dia 5.0 mm ti , super vim suture anchor dia 5.02 mm ti , bio rci screw 7*25 mm10*35 mm , bio rci h a screw 7*25 mm 11*30 mm , endobutton cl ultra 15 mm 30 mm , rci screw ( any size ) , suturefix anchor 1.9 mm , suturefix anchor1.7 mm , dril bit passing pin dia 2.45 mm , graftpassing pin ( beadthpin ) drill tip , cannulated endoscopic reamerdia 4.5 mm , twinfix ti 5.0 mm suture anchor , twinfix ti 3.5mm suture anchor , twinfix ti 2.8 mm suture anchor , accu pass 45 digree left / right , clear track complet cannula system 5*45mm 8.5 *72 mm...

North Western Railway - Rajasthan

39737637 supply of copper tube terminal heavy duty long barrel size 120 sq mm, hole dia 12 mm similar to dowells cat. no. cus 287. [ warranty period: 30 months after the date of delivery ] => limited...

Rajasthan State Cooperative Consumer Federation Limited - Rajasthan

39629728 supply of orthopedic implants 1 lcp anterier superior clavicle plate 3 5 2 lcp anterier superior clavicle plate 6 8 3 lcp hook clavicle plate 3 6 4 lcp periarticular humerour plate 3 8 5 lcp philos plate 3 5 6 lcp philos plate 6 10 7 lcp extra articular humerous plate 4 6 8 lcp extra articular humerous plate 8 10 9 lcp middel humerous plate with screw 4 8 10 lcp lateral humerous plate with support plate with screw 4 8 11 lcp lateral humerous plate without support with screw 4 8 12 i / l humerous nail all size 13 lcp oleceron plate 4 10 14 lcp recon plate 5 10 hole 15 lcp recon plate 11 16 hole 16 lcp narrowa plate 6 12 17 narrowa plate 5 11 18 locking dcp plate 5 7 hole 19 locking dcp plate 8 12 hole 20 locking dcp plate 5 7 hole 21 locking dcp plate 8 12 hole 22 sf / dcp plate 5 7 hole 23 sf / dcp plate 8 12 hole 24 one third tubular plate 4 7 hole 25 one third tubular plate 8 10 hole 26 lcp one thire tubular plate 5 10 27 radius / ulna nail all sizes 28 4 mm cc screws all sizes 29 lcp distal radius plate 3 6 hole 30 lcp oblique plate 3 6 hole 31 lcp volar plate 3 6 hole 32 i / l locking bolt 3.4 mm 33 cortical 3.5 mm screws 34 locking cortical 3.5 mm screws 35 locking cancellous 3.5 mm screws 36 locking 2.7 mm screws 37 cortical 2.4 mm screws 38 locking 2.4 mm screws 39 4.5 mm cortical screw 40 5 mm locking cortical screw 41 4 mm lock cansollous screw 42 4 mm lock cortical screw 43 biplolar with cement 44 bipolar without cement 45 short pfn nail 46 long pfn nail 47 dhs 135* long barrel plate 48 lcp dhs* long barrel 49 dcs 95* plate 50 i / l femur nail 51 lcp distal femoral plate 5 10 hole 52 lcp distal femoral plate 11 14 hole 53 lcp proximal femoral plate 6 12 hole 54 i / l tibia nail 55 i / l expect tibia nail 56 lcp proximal tibial plate 4 8 hole 57 lcp proximal tibial plate 9 12 hole 58 lcp distal tibial plate 4 6 hole 59 lcp distal tibial plate 7 10 hole 60 lcp broad dcp plate 6 8 hole 61 lcp broad dcp plate 9 12 hole 62 broad dcp plate 6 8 hole 63 broad dcp plate 9 12 hole 64 lcp anerolateral tibial plate 4 10 hole 65 rush nail sizes 66 lcp calcaneum plate with screw 67 tens nail all sizes 68 c.c. 6.5 screws all sizes 69 supra condylar nail 70 lcp buttress palte 4 7 hole 71 lcp buttress plate 8 10 hole 72 lcp posterier medial tibial plate 2 8 hole 73 raft plate 4 10 hole 74 lcp distal fibula plate 3 8 hole 75 malleolar screw all sizes 76 externalfixator ( one clamp ) 11 mm 77 externalfixator tubler rod all size 11 mm 78 schanz pin all sizes 79 steminin pin all size 80 tube to tube clamp 81 hybrid fixator 82 mono rail fixator 83 dhs leg screw all size 84 i / l locking bolt 4.9 mm 85 6.2 / 6.4 / 6.5 mm bolt pfn 86 8.0 mm bolt pfn 87 locking cansollous 5.00 mm all size 88 locking cansollous 6.5 mm all size 89 mono axail screw all size 90 poly axail screw all size 91 pedical rod all size 92 stappler 93 connector 94 modular bipolar without ( titsnium stem & ha coated 95 modular bipolar bipolar with cement 96 thr hybrid 97 thr ceremic on poly 98 thr cemented 99 thr metal on poly 100 tkr metal back 101 tkr with vitamin e poly 102 tkr titanium with layers 103 tkr with highflex 104 armor coat tkr with vitamin e poly 105 endo button / rope 106 bio screw 107 one button cl loop size 15mm 40 mm sterile 108 spiked washer for 4 mm 6.5 mm 109 tibial post fixation screw dia 6.5 mm len 30 mm 110 stayfix spiked lifament staple size small & long 111 suturefix tibial base plate round hole ti sterile 112 softfix interference scres dia 7.0 mm len 30 mm ti st. 113 shaver blade strile 114 softfix interference scres dia 7.30 mm ti strile 115 mini vim suture anchor dia 2.8 mm ti 116 mini vim 11 suture anchor dia 3.5 mm ti 117 super vim suture anchor dia 5.0 mm ti 118 super vim suture anchor dia 5.02 mm ti 119 bio rci screw 7*25 mm 10*35 mm 120 bio rci h a screw 7*25 mm 11*30 mm 121 endobutton cl ultra 15 mm 30 mm 122 rci screw ( any size ) 123 suturefix anchor 1.9 mm 124 suturefix anchor 1.7 mm 125 dril bit passing pin dia 2.45 mm 126 graft passing pin ( beadth pin ) drill tip 127 cannulated endoscopic reamer dia 4.5 mm 128 twinfix ti 5.0 mm suture anchor 129 twinfix ti 3.5 mm suture anchor 130 twinfix ti 2.8 mm suture anchor 131 accu pass 45 digree left / right 132 clear track complet cannula system 5*45mm 8.5 *72 mm...

Rajasthan State Cooperative Consumer Federation Limited - Rajasthan

39629649 tender for supply of ayurvedic medicine 1 lcp anterier superior clavicle plate 3 5 2 lcp anterier superior clavicle plate 6 8 3 lcp hook clavicle plate 3 6 4 lcp periarticular humerour plate 3 8 5 lcp philos plate 3 5 6 lcp philos plate 6 10 7 lcp extra articular humerous plate 4 6 8 lcp extra articular humerous plate 8 10 9 lcp middel humerous plate with screw 4 8 10 lcp lateral humerous plate with support plate with screw 4 8 11 lcp lateral humerous plate without support with screw 4 8 12 i / l humerous nail all size 13 lcp oleceron plate 4 10 14 lcp recon plate 5 10 hole 15 lcp recon plate 11 16 hole 16 lcp narrowa plate 6 12 17 narrowa plate 5 11 18 locking dcp plate 5 7 hole 19 locking dcp plate 8 12 hole 20 locking dcp plate 5 7 hole 21 locking dcp plate 8 12 hole 22 sf / dcp plate 5 7 hole 23 sf / dcp plate 8 12 hole 24 one third tubular plate 4 7 hole 25 one third tubular plate 8 10 hole 26 lcp one thire tubular plate 5 10 27 radius / ulna nail all sizes 28 4 mm cc screws all sizes 29 lcp distal radius plate 3 6 hole 30 lcp oblique plate 3 6 hole 31 lcp volar plate 3 6 hole 32 i / l locking bolt 3.4 mm 33 cortical 3.5 mm screws 34 locking cortical 3.5 mm screws 35 locking cancellous 3.5 mm screws 36 locking 2.7 mm screws 37 cortical 2.4 mm screws 38 locking 2.4 mm screws 39 4.5 mm cortical screw 40 5 mm locking cortical screw 41 4 mm lock cansollous screw 42 4 mm lock cortical screw 43 biplolar with cement 44 bipolar without cement 45 short pfn nail 46 long pfn nail 47 dhs 135* long barrel plate 48 lcp dhs* long barrel 49 dcs 95* plate 50 i / l femur nail 51 lcp distal femoral plate 5 10 hole 52 lcp distal femoral plate 11 14 hole 53 lcp proximal femoral plate 6 12 hole 54 i / l tibia nail 55 i / l expect tibia nail 56 lcp proximal tibial plate 4 8 hole 57 lcp proximal tibial plate 9 12 hole 58 lcp distal tibial plate 4 6 hole 59 lcp distal tibial plate 7 10 hole 60 lcp broad dcp plate 6 8 hole 61 lcp broad dcp plate 9 12 hole 62 broad dcp plate 6 8 hole 63 broad dcp plate 9 12 hole 64 lcp anerolateral tibial plate 4 10 hole 65 rush nail sizes 66 lcp calcaneum plate with screw 67 tens nail all sizes 68 c.c. 6.5 screws all sizes 69 supra condylar nail 70 lcp buttress palte 4 7 hole 71 lcp buttress plate 8 10 hole 72 lcp posterier medial tibial plate 2 8 hole 73 raft plate 4 10 hole 74 lcp distal fibula plate 3 8 hole 75 malleolar screw all sizes 76 externalfixator ( one clamp ) 11 mm 77 externalfixator tubler rod all size 11 mm 78 schanz pin all sizes 79 steminin pin all size 80 tube to tube clamp 81 hybrid fixator 82 mono rail fixator 83 dhs leg screw all size 84 i / l locking bolt 4.9 mm 85 6.2 / 6.4 / 6.5 mm bolt pfn 86 8.0 mm bolt pfn 87 locking cansollous 5.00 mm all size 88 locking cansollous 6.5 mm all size 89 mono axail screw all size 90 poly axail screw all size 91 pedical rod all size 92 stappler 93 connector 94 modular bipolar without ( titsnium stem & ha coated 95 modular bipolar bipolar with cement 96 thr hybrid 97 thr ceremic on poly 98 thr cemented 99 thr metal on poly 100 tkr metal back 101 tkr with vitamin e poly 102 tkr titanium with layers 103 tkr with highflex 104 armor coat tkr with vitamin e poly 105 endo button / rope 106 bio screw 107 one button cl loop size 15mm 40 mm sterile 108 spiked washer for 4 mm 6.5 mm 109 tibial post fixation screw dia 6.5 mm len 30 mm 110 stayfix spiked lifament staple size small & long 111 suturefix tibial base plate round hole ti sterile 112 softfix interference scres dia 7.0 mm len 30 mm ti st. 113 shaver blade strile 114 softfix interference scres dia 7.30 mm ti strile 115 mini vim suture anchor dia 2.8 mm ti 116 mini vim 11 suture anchor dia 3.5 mm ti 117 super vim suture anchor dia 5.0 mm ti 118 super vim suture anchor dia 5.02 mm ti 119 bio rci screw 7*25 mm 10*35 mm 120 bio rci h a screw 7*25 mm 11*30 mm 121 endobutton cl ultra 15 mm 30 mm 122 rci screw ( any size ) 123 suturefix anchor 1.9 mm 124 suturefix anchor 1.7 mm 125 dril bit passing pin dia 2.45 mm 126 graft passing pin ( beadth pin ) drill tip 127 cannulated endoscopic reamer dia 4.5 mm 128 twinfix ti 5.0 mm suture anchor 129 twinfix ti 3.5 mm suture anchor 130 twinfix ti 2.8 mm suture anchor 131 accu pass 45 digree left / right 132 clear track complet cannula system 5*45mm 8.5 *72 mm , etc....

Rajasthan University Of Health Science - Rajasthan

39612571 supply of orthopedic trauma implant ( titanium ) for orthopedic department supply orthopedic trauma implant ( titanium ) for orthopedic department, jaipuria hospital, jaipur , electrical items : , orthopedic trauma implants ( titanium ) , femur interlocking nail diameter 8 13 mm and length 32 44mm with four locking screws , tibia interlocking nail – diameter 8 12 mm and length 28 38mm with four locking screws , humerus interlocking nail diameter 6 9 mm length 22 34cm with four locking screws , pfn nail shortall size with locking screw all size , pfn nail longall size with locking screw all size , pfn a2 with spiral blade / lag screw and locking bolts , dfn standard locking option all size nail and all size locking screws , elastic nail of all size & diameter ( titanium ) , dhs plate ( 4 14 holes ) long barrel with compatible leg screw and compatible bolt and compatible screw any size and number as per plate whole size. , dhs with trochanteric stabilization plate plate ( 4 14 holes ) long barrel with compatible leg screw and compatible bolt and compatible screw any size and number as per plate whole size. , dhs plate ( 4 6 holes ) short barrel with compatible leg screw and compatible bolt and compatible screw any size and number as per plate whole size. , dhs with double angled plate ( 6 14 holes ) with leg screw and coupling bolt and plate screw any size and number depending on plate whole size. , dcs plate ( 6 14 holes ) with leg screw and coupling bolt and plate screw any size and number depending on plate hole size. , dhs plate 135 degree angle long barrel with locking plate, lag screw and locking screws , dcs plate 95 degree angle long barrel with locking plate, lag screw and locking screws. , reconstruction locking plate – 3.5mm 5 10 holes with compatible screw cortical cancellous partially or fully threaded any size number as per plate hole. , reconstruction plate. 4.5 mm hole size 4 10 with compatible screw cortical or cancellous partially or fully threaded any size and number as per pate holes. , reconstruction plate 3.5 mm hole size 4 10 with compatible screw cortical or cancellous partially or fully threaded any size and number as per pate holes. , locking reconstruction plate 4.5 mm hole size 4 10 with compatible screw cortical or cancellous partially or fully threaded any size and number as per pate holes. , t.plate 3.5mm 3 10 holes with compatible screw cortical or cancellous partially or fully threaded any size and number as per pate holes. , t. locking plate 3.5mm 5 to 9 holes with screw cortical or cancellous partially or fully threaded any size and number as per pate holes. , t oblique plate 3.5mm with compatible screws, cortical concellous, partially of fully threaded ( any size and number, as per plate holes ) , locking ellis plate 3.5 mm for l / e radius with compatible screws, cortical cancellous, partially of fully threaded ( any size and number, as per plate holes ) , variable angle distal radius locking plate 3.5 mm witth compatible cortical and cancellous partially and fully threaded scres ( any size and number, as per plate holes ) , lcp distal filula plate 3.5 mm witth compatible cortical and cancellous screws ( any size and number, as per plate holes ) , lockingolecranon plate ( lt. & rt. with 3 14 holes ) , locking distal medial tibial plate c181 ( lt. & rt. with compatible standard locking screws all sizes ) , low contact d.c.p. small 3.5 mm 5 8 holes with compatible screw cortical or cancellus partially or fully threaded any size and number as per plate holes. , low contact d.c.p. narrow 4.5 mm 5 8 holes with compatible screw cortical or cancellus partially or fully threaded any size and number as per plate holes. , low contact d.c.p. broad 4.5 mm 5 12 holes with compatible screw cortical or cancellus partially or fully threaded any size and number as per plate holes. , locking.d.c.p. small 3.5 mm 5 8 holes with compatible screw cortical or cancellus partially or fully threaded any size and number as per plate holes. , locking d.c.p. narrow 4.5 mm 5 8 holes with compatible screw cortical or cancellus partially or fully threaded any size and number as per plate holes. , locking d.c.p. broad 4.5 mm 5 12 holes with compatible screw cortical or cancellus partially or fully threaded any size and number as per plate holes. , mini dcp plate for metacarpal etc. 4 to 8 holes compatible cortical screw and cancellous partial or full threaded of all sizes and number as per plate hole size. , 2.7mm dcp plate 4 to 8 holes compatible cortical screw and cancellous partial or full threaded of all sizes and number as per plate hole size. , 1 / 3 tubular plate 4 10 holes 3.5mm compatible cortical screw and cancellous partial or fully threaded of all sizes and number as per plate hole size. , semi tubular plate 4 10 holes 3.5mm compatible cortical screw and cancellous partial or fully threaded of all sizes and number as per plate hole size. , extra articular locking plate for distal humerus 4 10holes with compatible cortical, cancellous and locking screws any number and size as per plate hole , proximal humerus locking plate ( low profile ) – 3 12 holes with compatible locking and non locking head screws self tapping any size and number as per plateholes , proximal humerus locking plate ( philos ) – 3 12 holes with compatible locking and non locking head screws self tapping any size and number as per plate holes , medial column anatomical locking plate for distal humerus 4 10holes with compatible cortical, cancellous and locking screws any number and size as per plate hole , lateral column anatomical plate for distal humerus 4 10holes with compatible cortical, cancellous and locking screws any number and size as per plate hole , distal femoral locking plate 5 13 holes lt. / rt. with compatible screw cortical or cancellous partially or fully threaded any size and number as per plate holes with compatible 5.0mm locking head screw self tapping , distal femoral anatomical contoured locking plate 5 13 holes lt. / rt. with compatible screw cortical or cancellous partially or fully threaded any size and number as per plate holes with compatible 5.0mm locking head screw self tapping , proximal lateral tibial locking plate l / r 5 13 holes with compatible screw cortical or cancellous partially or fully threaded any size and number as per plate holes with compatible 5.0mm locking head screw self tapping , proximal tibial anatomical contoured locking plate l / r 5 13 holes with compatible screw cortical or cancellous partially or fully threaded any size and number as per plate holes with compatible 5.0mm locking head screw self tapping , t plate 4.5 mm for proximaltibia 5 13 holes with compatible screw cortical or cancellous partially or fully threaded any size and number as per plate holes , locking t plate for proximaltibia 5 13 holes with compatible screw cortical or cancellous partially or fully threaded any size and number as per plate holes with compatible 5.0mm locking head screw self tapping , lplate 4.5 mm for proximaltibia 5 13 holes with compatible screw cortical or cancellous partially or fully threaded any size and number as per plate holes , locking l plate for proximaltibia 5 13 holes with compatible screw cortical or cancellous partially or fully threaded any size and number as per plate holes with compatible 5.0mm locking head screw self tapping , posteromedial anatomical locking plate for upper end tibia 3 8 holes with compatible cortical, cancellous and locking screws any number and size as per plate hole , anatomical locking plate for distal tibia 5 12 holes with compatible cortical, cancellous and locking screws any number and size as per plate hole , trochantric locking plate ( proximal femur locking plate ) 5 13 holes lt. / rt. with compatible screw cortical or cancellous partially or fully threaded any size and number as per plate holes with compatible 5.0mm locking head screw self tapping , anatomical locking plate for clevicle 5 12 holes with compatible cortical, cancellous and locking screws any number and size as per plate hole , calcaneum locking plate with screws , pelvic reconstruction plate curved with compatible screw 5to 12 hole. , y shape pelvic reconstruction plate with compatible screw 6 12 holes. , 4.5mm cortical screw self tapping any size. , 6.5mm cancellous bone screw 16mm threaded / 32 mm threaded / full threaded any size , 4.0 mm cancellous screw partial / full threaded any size , 4.0 mm cancellous screw partial / full threaded , 6.5mm cannulated cancellous bone screw 16mm threaded / 32 mm threaded / full threaded , washer small / large , headless screw ( scaphoid ) titanium any size ( herbert screw ) , 3.5mm cortical screw self tapping any size. , malleolar screw 4.5mm with matching washer size 35 70mm. , titanium pedicle screw monoaxial single lock in all size , titanium pedicle screw polyaxial single lock in all size , titanium connecting rods different lengths , expandable cages of dorsal lumbar spine in all size , transverse connector...

North Western Railway - Rajasthan

39585357 supply of hyt pit wheel lathe hydraulic oil, servo system 68 of m / s. iocl or enklo 68 of m / s. hpcl or hydrol 68 of m / s. bpcl. note: each barrel consists of 210 litres oil in non returnable barrels [ warranty period: 30 months after the date of delivery ] ...

Medical And Health Services - Rajasthan

39584221 supply orthopedic trauma implant ( titanium ) for orthopedic department 2 femur interlocking nail diameter 8 13 mm and length 32 44mm with four locking screws tibia interlocking nail diameter 8 12 mm and length 28 38mm with four locking screws humerus interlocking nail diameter 6 9 mm length 22 34cm with four locking screws 5 pfn nail short all size with locking screw all size 6 pfn nail long all size with locking screw all size 7 pfn a2 with spiral blade / lag screw and locking bolts 8 00 dfn standard locking option all size nail and all size locking screws 6 elastic nail of all size & diameter ( titanium ) 10 dhs plate ( 4 14 holes ) long barrel with compatible leg screw and compatible bolt and compatible screw any size and number as per plate whole size. 11 dhs with trochanteric stabilization plate plate ( 4 14 holes ) long barrel with compatible leg screw and compatible bolt and compatible screw any size and number as per plate whole size. 12 dhs plate ( 4 6 holes ) short barrel with compatible leg screw and compatible bolt and compatible screw any size and number as per plate whole size. 13 dhs with double angled plate ( 6 14 holes ) with leg screw and coupling bolt and plate screw any size and number depending on plate whole size. 19 reconstruction plate 3.5 mm hole size 4 10 with compatible screw cortical or cancellous partially or fully threaded any size and number as per pate holes. 20 locking reconstruction plate 4.5 mm hole size 4 10 with compatible screw cortical or cancellous partially or fully threaded any size and number as per pate holes. 21 t.plate 3.5mm 3 10 holes with compatible screw cortical or cancellous partially or fully threaded any size and number as per pate holes. 22 t. locking plate 3.5mm 5 to 9 holes with screw cortical or cancellous partially or fully threaded any size and number as per pate holes. 23 toblique plate 3.5mm with compatible screws, cortical concellous, partially of fully threaded ( any size and number, as per plate holes ) 24 locking ellis plate 3.5 mm for l / e radius with compatible screws, cortical cancellous, partially of fully threaded ( any size and number, as per plate holes ) 25 variable angle distal radius locking plate 3.5 mm witth compatible cortical and cancellous partially and fully threaded seres ( any size and number as per plate holes ) 26 lcp distal filula plate 3.5 mm witth compatible cortical and cancellous screws any size and number as per plate holes ) 27 locking olecranon plate ( lt. & rt. with 3 14 holes ) 28 locking distal medial tibial plate c181 ( lt. & rt. with compatible standard locking screws all sizes ) 29 low contact d.c.p. small 3.5 mm 5 8 holes with compatible screw cortical or cancellus partially or fully threaded any size and number as per plate holes. 31 low contact d.c.p. broad 4.5 mm 5 12 holes with compatible screw cortical or cancellus partially or fully threaded any size and number as per plate holes. locking.d.c.p. small 3.5 mm 5 8 holes with compatible screw cortical or cancellus partially or fully threaded any size and number as per plate holes. 33 locking d.c.p. narrow 4.5 mm 5 8 holes with compatible screw cortical or cancellus partially or fully threaded any size and number as per plate holes. 34 locking d.c.p. broad 4.5 mm 5 12 holes with compatible screw cortical or cancellus partially or fully threaded any size and number as per plate holes. 35 mini dcp plate for metacarpal etc. 4 to 8 holes compatible cortical screw and cancellous partial or full threaded of all sizes and number as per plate hole size. 36 2.7mm dcp plate 4 to 8 holes compatible cortical screw and cancellous partial or full threaded of all sizes and number as per plate hole size. 37 1 / 3 tubular plate 4 10 holes 3.5mm compatible cortical screw and cancellous partial or fully threaded of all sizes and number as per plate hole size. 38 semi tubular plate 4 10 holes 3.5mm compatible cortical screw and cancellous partial or fully threaded of all sizes and number as per plate hole size. 39 extra articular locking plate for distal humerus 4 10 holes with compatible cortical, cancellous and locking screws any number and size as per plate hole....

Indian Army - Rajasthan

39572117 bids are invited for target iron barrel for target , target fig 11 , target tin sheet fig 11 , packing wire , iron cutter blade , drawing roll , silver foil roll , smoke candle total quantity : 942...

Department Of Sports - Rajasthan

39522497 tender for lg400 monotec e (electronic trigger), blometric grip right, size m and system: compressed air 300 and 200 bar caliber: 4.5mm (1.77) pellet magazine capacity: approx 600 shot(s) max. energy: 7.5 joule(s) stock: aluminium stock carrier stock length: 310 390 mm grip: memory 3d grip biomatric, right m trigger: two stage and dry firing trigger trigger weight: 15 20g sights: insight out competition sight and centra foresight sight length: 650 850 mm barrel: carbon barrel jacket barrel length: 420 mm dimensions (l/h/w): 1075 1100/290/50mm weight: 4970 g packaging: plastic case...